Specialty Crops Equipment For Crop Cultivation In Iowa
-
Manufactured by Nachurs Alpine Solutionsbased in USA
NACHURS K-fuel is powered by the highest concentration of NACHURS Bio-K technology available, the most available source of potassium. There is a need for additional potassium in most fertility programs due to low soil test levels caused by higher crop yields that are removing more potassium than is being replaced. NACHURS K-fuel is uniquely suited for specialty crops where unique crop quality and ...
-
Manufactured by Flexxifinger QD Industries Inc.based in CANADA
The Flexxifinger® Heavy Duty Crop Lifter™ is for harvesting a variety of different crops including pulses, cereals, rice, oils, forage and other specialty crops. The lifter rail hugs the guard and the replaceable nylon finger is held by an adjustable receptor, allowing the combine operator to fine-tune the location of the lifter’s forward lifting point for his specific conditions. ...
-
Manufactured by MacDon Industries Ltd.based in USA
The MacDon D65 Draper Header is designed to deliver outstanding straight cut performance, especially when faced with tough harvesting conditions. Low podding, downed, tangled, or even lodged crops; whatever the harvesting situation the MacDon D65 Draper Header excels. Combining or swathing, the D65 is a true multi-crop harvesting solution. This “Can Do” attitude delivered with MacDon ...
-
Manufactured by Landini, McCormick and Valpadana, brands by Argo Tractors S.p.A.based in ITALY
The 4600 series completes Valpadana’s range of equal-wheel tractors in the low-power range. These compact tractors provide superior performance and unique technical features. Supplied in a variety of configurations, with either equal wheels or oversized rear wheels, they are specially designed for intensive crop cultivations such as orchards and vineyards, greenhouses and nurseries, as well ...
-
Manufactured by Flexxifinger QD Industries Inc.based in CANADA
The FlexxiFloat™ 100 crop lifter combines the flexibility of the FlexxiFloat™ series with the gentle lift of a nylon finger. The spring pivot attached to the rail allows the lifter to flex in varying ground conditions, while the nylon finger provides a gentle lift to the crop. The lifter and finger can be paired with the optional 20250 shoe to add increased wear on the tip of the ...
-
Manufactured by T-L Irrigation Co.based in USA
T-L Linear Irrigation Systems use up to 60% less water than flood irrigation and cover almost 98% of a rectangular field. Critical to higher value crops, T-L's continuous movement performance delivers the most precise water pattern available, most important when chemigating. T-L's simplicity allows one person to effectively manage many systems. With linear irrigation systems, the majority of the ...
-
Manufactured by Flexxifinger QD Industries Inc.based in CANADA
The FlexxiFloat™ crop lifter series have a spring-pivot which allows the lifter to follow the fluctuations of the ground, making it ideal for uneven ground conditions. The FlexxiFloat™ system is available with two rail options: the standard rail and the high-pivot rail. The standard rail is generally used with a rigid header, while the high-pivot rail is used with a flex header, ...
-
Manufactured by New Holland Agriculture - a Brand of CNH Global N.V.based in USA
NEW TS6 Series tractors are the new face of standard tractors, yet these tractors are anything but basic. They’re big on power and efficiency, loaded with comfort, and ready to handle your toughest tasks. In short, they’re your best choice if you’re looking for a strong, modern and affordable all-purpose ...
-
Manufactured by Landini, McCormick and Valpadana, brands by Argo Tractors S.p.A.based in ITALY
The 4600 series completes Valpadana’s range of equal-wheel tractors in the low-power range. These compact tractors provide superior performance and unique technical features. Supplied in a variety of configurations, with either equal wheels or oversized rear wheels, they are specially designed for intensive crop cultivations such as orchards and vineyards, greenhouses and nurseries, as well ...
-
Manufactured by Landini, McCormick and Valpadana, brands by Argo Tractors S.p.A.based in ITALY
The Rex F range has been completely renovated to provide ultimate performance, improved ergonomics, maximum comfort and unequalled safety. The renovation work consists in a redesigned cab roof, a tilting hood restyling with integrated nicely shaped headlights, and a complete re-vamping of the cockpit, where a new and more ergonomic control layout provides maximum roominess for the operator, thus ...
-
Manufactured by Balzer Inc.based in USA
Balzer manufactures Specialty Crop Shredders, most commonly for rice and vegetable operations. The Rice Shredder is available in End Drive models ranging in size from 15 feet to 26.5 feet. The Vegetable Shredder is a Pull Type End Drive model, available in sizes 13 feet to 15 feet. The Rice Shredder and Vegetable Shredder now both come standard with 9.5L15 implement tires. Balzer manufactures ...
-
Manufactured by CLAAS Groupbased in GERMANY
TANGENTIAL AXIAL FLOW (TAF) is unequalled for harvesting versatility - wheat, rice, maize, basmati, sunflowers, soybeans, chickpeas, mustard, mung beans, pigeon peas, etc. TATA engine (BS-III emissions standard) with 76 HP and plenty of torque in reserve. Available in 2.60 m cutterbar and 3.20 m cutterbar with crop lifters. Long service intervals, easy servicing. High-quality fibre canopy for ...
-
Manufactured by MacDon Industries Ltd.based in USA
The MacDon D65 Draper Header is designed to deliver outstanding straight cut performance, especially when faced with tough harvesting conditions. Low podding, downed, tangled, or even lodged crops; whatever the harvesting situation the MacDon D65 Draper Header excels. Combining or swathing, the D65 is a true multi-crop harvesting solution. This “Can Do” attitude delivered with MacDon ...
-
Manufactured by SAME DEUTZ-FAHR - SDF Groupbased in USA
Built narrow and dexterous, the Agrocompact series of compact tractors was designed for use on specialty crops, and the municipal and landscaping markets. They are the ideal narrowstance, highly maneuverable, high-horsepower tractors for orchard and vineyard work. The Agrocompact Series features an innovative electronic fuel injection system (EMC) that’s driven directly from the camshaft to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you