Plough (Tillage) Equipment
-
Manufactured by Patiala Discs Corporation (PDC AGRO)based in INDIA
PDC AGRO is an ISO 9001:2008 Certified and Govt. Approved Manufacturer and Exporters of Agricultural Implements like Staw Reaper, Laser Land Leveller, Rotavator, Cultivator, Rotary Tiller, Seed Drill, Paddy Chopper, Fodder Loader and other Agricultural Products. Our products are Tested and Approved by Government Of India Ministry of Agriculture (Department of Agriculture and ...
-
Manufactured by Captain Tractors Pvt. Ltd.based in INDIA
Plough is used for primary tillage operations. It cuts trash and buries it completely. it is also used for turning green manure crop for decaying under the soil, which adds humus to the soil. Compost, Farmyard manure or lime when spread in the field, the mould board plough is used for turning and mixing these materials in the soil. ...
-
Manufactured by PÖTTINGER Landtechnik GmbHbased in AUSTRIA
Mounted plough with 4 to 6 ...
-
Manufactured by PÖTTINGER Landtechnik GmbHbased in AUSTRIA
Mounted ploughs 4- to ...
-
Manufactured by Gessner Industriesbased in AUSTRALIA
Gessner offers both HR1200 Hydraulic Release Tyne and Rigid Tyne Chisel Ploughs, ensuring that all of your broadacre ground preparation requirements are catered for. The combination of heavy-duty frame and quality, field-proven units provides unmatched durability and longevity in tough tillage ...
-
Manufactured by Perrein SASbased in FRANCE
Better than ploughing: The Express Plough does not create hardpan, restructures the topsoil, refines the surface layer, and creates a mulch on the top. Exchanges between subsoil and topsoil are improved, as are the drainage of rainwater and rooting crops. The decomposition of stubble is faster, organic matter is not ...
-
Manufactured by PÖTTINGER Landtechnik GmbHbased in AUSTRIA
Mounted ploughs 3-, 4- and 5-shares - up to 140 ...
-
Manufactured by Abollo Agricultural Machinery Industry and Trading Co.based in TURKEY
Adjusting wheel is the most important aid the tractor and driver. Line setting of adjusting wheel has to be done at the first use of plough. In setting, adjusting wheel line must be paralel to the lines of discs on the ground. In other case, movement of plough began to quit its right line and it causes ...
-
Manufactured by Agrimirbased in TURKEY
In conformity with the current agricultural conditions are available in 2, 3, 4, 5 and 6 disc version. Disc ploughs have an excellent performance in every type of soil by the basic principles such as soil breaking, soil raising, soil turning and soil mixing. The disc ploughs are used to open the new fields and to process the stony areas. ...
-
Manufactured by Agrimirbased in TURKEY
Classic Mouldboard Plough are manufactured in 2, 3, 4, 5 body. Chassis sizes: 85x25, 85×28 and 90×30 mm options. Body intervals: 60 and 85 cm options. Body Sizes: 10, 12, 14 and 16 inch options. The primary purpose of ploughing is to turn over the upper layer of the soil, bringing fresh nutrients to the surface, while burying ...
-
Distributed by Schiller Grounds Care Inc.based in USA
The Mantis Plough makes deeper furrows and higher mounds. This attachment helps you create ideal growing conditions for your potatoes, leeks, etc. Potatoes and leeks require regular attention to ensure they grow in a deep planted environment. This is where the Plough can really help. Like a plough, set the furrower to the required depth, ...
-
Manufactured by Corner Machinery Ltd.based in TURKEY
erosion, increasing infiltration and leaving the rainwater on the field. Ploughs are manufactured as 2,3,4,5 and 6 moldboard , 85×25 mm , 85×28 mm and 90×30 mm diameter sheet frame chassis.Distances between moldboards are ; 60 cm ,85 cm and shall work together with 9,10,12,14 and 16 inch tractor power This mean greater ...
-
Manufactured by SMS CZ s.r.o.based in CZECH REPUBLIC
Subsoiling Plough is a deep cultivator for soil aggregation which allows, by means of a three-point linkage, the combination of this equipment with other equipment for working the surface of tilled soil. The basic frame is fitted as standard with transversely curved standards NIAUX using yokes, which allows their spacing, or the fitting of ...
-
Manufactured by Abollo Agricultural Machinery Industry and Trading Co.based in TURKEY
Adjusting wheel is the most important aid the tractor and driver. Line setting of adjusting wheel has to be done at the first use of plough. In setting, adjusting wheel line must be paralel to the lines of discs on the ground. In other case, movement of plough began to quit its right line and it causes ...
-
Manufactured by Bednar FMT s.r.o.based in CZECH REPUBLIC
TERRALAND TN is a chisel plough that enables inexpensive, fast and deep soil tillage up to a depth of 65 cm. The unique design of the tines allows all types of soil to be treated whilst requiring the use of less horsepower. In practice is appropriate to use the machine in range of depths of 25–55 cm, thus disturbing compressed soil ...
-
Manufactured by BCS Groupbased in ITALY
The GroundBlaster rotary plough solves the problem of ploughing and subsequent rotary hoeing, incorporating the two operations in a single passage, leaving the soil ready for ...
-
Manufactured by Agro FSMSbased in TURKEY
The primary soil tillage machine is mounted from tractor's hydraulic lifting unit and universal three point linkage system. Therefore transportation to the field can be easily done.The purposes of tillage are as follows; cultivating of stubbly and fallowing soil,mulching the soil, preparing the seed bed,controlling the weeds and diseases,putting the fertilizer,herbicide and stubble in the ...
-
Manufactured by UAB Žaibasbased in LITHUANIA
Mounted conventional ploughs with leaf spring protection, 3-4-5 ...
-
Manufactured by AGROWPLOW P/Lbased in AUSTRALIA
The AP51 is the next level up in strength. The heavy duty frame and the newest, innovative No.9 style shank is the perfect combination to shatter deep compacted hardpans up to 450mm for mid size farming. ...
-
Manufactured by Escudero - Fabricacion de maquinaria agrícola S.L.based in SPAIN
Fixed ecologic plough, designed so that crop residue can be turned or buried with minimum tillage, under any conditions and on any kind of land. The work depth reached by this equipment ranges between 10 and 30 centimeters. Thee separation between plough bodies prevents clogging, irrespective of the amount of stubble. It has leaf-spring ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you