crop lifter Downloads

  • Dutch - Rigid Crop Lifter Datasheet

    Object MovedThis document may be found ...


    By Dutch Industries

  • Gaterman - Model 4S - Crop Lifters Manual

    The 4S is a rugged, fully adjustable crop lifter used on combine floating cutterbars equipped with 1-1/2” cut stub guards similar to image on the right. It features spring loaded action and infinite height adjustment by means of a locking hex head set screw. It is double bolted to the cutterbar using the 3/8” and 7/16” carriage mounting bolts included for use with various ...

  • Gaterman - Model 2HC - Crop Lifter Brochure

    A. Remove nuts from two 3/&" x 2" machine bolls. (Most windrowers require 7/16" x 2" machine bolts except Owatonna using 1/2"). Bolt to combine or windrower with front end of sickle guard inside the top of housing. (In this position the crop lifter will hang downward without spring pressure). If part 2HC is so located that only one bolt is through sickle clip, use enough washers on other bolt ...

  • Gaterman - Model 8B or 1B - Crop Lifters Manual

    The 8B is our most versatile and universal fit crop lifter. It features spring loaded action, a compact mounting design, and a height adjustment block (C-block) which accommodates a variety of platforms and sickle guards. The C-block adjusts for different length and shape sickle guards, while maintaining a solid mounting. The C-block has three holes for the tip of the sickle guard, and achieves 6 ...

  • Gaterman - Model 8A or 1A - Crop Lifters Manual

    The 8A is meant for applications in which the sickle guards tilt downward. It features spring loaded action, a compact mounting design, and a height adjustment block (C-block) which accommodates a variety of platforms. The C-block adjusts for different length and shape sickle guards, while maintaining a solid mounting. The C-block has three holes for the tip of the sickle guard, and achieves 6 ...

  • Gaterman - Model 4H - Crop Lifters Datasheet

    The 4H is a rugged, fully adjustable crop lifter used in demanding applications. It features spring loaded action and infinite height adjustment by means of a locking hex head set screw. The nested receiver pocket for the sickle guard provides the ultimate in solid mounting. Both 3/8” and 7/16” carriage mounting bolts are included for use with various platform ...

  • Gaterman - Model 4B - Crop Lifter Manual

    The 4B is a rugged, non-adjustable crop lifter used in demanding low cutting applications. It features spring loaded action and a nested receiver pocket for the sickle guard providing the ultimate in solid ...

  • CLC-18 - Crop Lifter/Conditioners Brochure

    INDUSTRIESAMADASINDUSTRY LEADER PROVEN PERFORMANCE INNOVATIVE DESIGN1100 Holland Road / Suffolk, VA 23434Telephone (757) 539-0231 / Fax (757) 934-3264 www.amadas.comE-mail Address: sales@amadas.com1701 S. Slappey Blvd. / Albany, GA 31701Telephone (229) 439-2217 / Fax (229) 439-9343AMADAS INDUSTRIES whose policy is one of continuous improvement, reserves the right to change specifications ...


    By Amadas Industries

  • Empire - Vine Lifters Brochure

    Developed to improve the ability to harvest pulse crops, which lie low on the ground and can often lodge. They are designed to be easy to mount and adjust to ensure maximum performance with minimum time investment. Pulse  crops present special challenges at harvest time so Empire began to manufacture  vine lifters to aid in the ...

  • Row-Crop Tractors Brochure

    With the 6145M, you get the right mix of automation and mechanical efficiency in a compact but powerful package. Choose from several transmission options, including a 25 mph (40K) or a creeper option with speeds as low as .09 mph (1.4 km/h). All PowrQuad™ transmissions feature a left-hand reverser for no-clutch, no-skid loader work. The 6145M is a powerful, versatile, heavy lifter that ...


    By John Deere

  • CROP TIGER - Model 40 - Combine Harvesters Brochure

    TANGENTIAL AXIAL FLOW (TAF) is unequalled for harvesting versatility - wheat, rice, maize, basmati, sunflowers, soybeans, chickpeas, mustard, mung beans, pigeon peas, etc. TATA engine (BS-III emissions standard) with 76 HP and plenty of torque in reserve. Available in 2.60 m cutterbar and 3.20 m cutterbar with crop lifters. Long service intervals, easy servicing. High-quality fibre canopy for ...


    By CLAAS Group

  • CROP TIGER- TERRA TRAC - Model 40 - Combine Harvesters Brochure

    TANGENTIAL AXIAL FLOW (TAF) is unequalled for harvesting versatility - wheat, rice, maize, basmati, sunflowers, soybeans, chickpeas, mustard, mung beans, pigeon peas, etc.TATA engine (BS-III emissions standard) with 76 HP and plenty of torque in reserve.3.20 m cutterbar with crop lifters as standard.Long service intervals, easy servicing.High-quality fibre canopy for maximum operator ...


    By CLAAS Group

  • Terra Dos - Model T3 - Sugar-Beet Harvester Brochure

    The Terra Dos T3 tanker sugar-beet harvester likes a challenge, no matter whether on snow, stony ground, slopes or in weed-ridden fields. The superior technology of this high performance harvester ensures the best possible results, even under exacting harvesting ...


    By HOLMER Maschinenbau GmbH

  • Terra Dos - Model T3 - Sugar Beet Harvesters Brochure

    The Terra Dos T3 tanker sugar-beet harvester likes a challenge, no matter whether on snow, stony ground, slopes or in weed-ridden fields. The superior technology of this high performance harvester ensures the best possible results, even under exacting harvesting ...


    By Agrifac Machinery B.V.

  • Terra Dos - Model T4-40 - 3-Axels Beet Lifting Machine-Brochure

    Terra Dos T32The Terra Dos T3.Maximum performance - no compromises.It was a good year for beets. Now it is a question of collecting the oncoming crop safely, quickly and tidily – irrespective of the conditions. HOLMER, number one world-wide in the beet-har-vesting sector, offers you a smart and flexible answer for this task: Terra Dos T3.The Terra Dos T3 tanker sugar-beet harvester likes a ...


    By HOLMER Maschinenbau GmbH

  • OptiSun, OptiSun CS, OptiSun Z Sunflower Harvester Adapters Brochure

    OPTIGÉP MACHINE MANUFACTURING AND TRADING LTD.H–5630 Békés, Pf. 44 • Tel.: +36-66/411-833 • Fax: +36-66/411-045E-mail: optigep@mail.datanet.hu • http://www.optigep.huType: OptiSun476 576 676 876 1076 1276 1676Number of harvestable rows 4 5 6 8 10 12 16Harvestable row space cm 76,2Recommended speed of working km/h 8–10Field performance ha/10 hours 11–15 14–19 17–23 23–31 29–39 35–46 ...

  • Mounted Forage Harvester-Brochure

    The 300 series headerRow independent •Short design •Performance without limits •Easy maintenance •Maintains its value •Wide range of applications Greater manoeuvrability3 – 7.5 m working widthMinimal service requirementsHigh resale valuesuccess through continuity success through continuity 100 years100 yearsThe headers of the 300 series operate in an open cut mode. Fast and uncompromising. Up ...


    By KEMPER GmbH & Co. KG

  • Model SP100 - Potato Digger Brochure

    In the Checchi & Magli potato digger range, it is the big sister. A single-row machine, available with a 3-point linkage for both conventional tractors and narrow track ones. It is equipped with a fixed ploughshare, 2 sieves that alternately vibrate to clean the potatoes, side unloading and extremely robust. It is particularly suitable for compact soil and steep slopes. It can also be used ...


    By Checchi e Magli Srl

  • Case IH - Model 4400 Series - Corn Heads - Brochure

    Case IH 4400 series corn headers offer excellent picking ability in both standing and down corn, increasing grain savings in all circumstance. What’s more, they offer unrivalled ease of servicing to ensure they are ready for work in no time at all, and perform in all harvesting conditions. The dividers are key to pick up layed crop or seperate tangled corn plants. They have a considerable ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you