final felling Downloads

  • Neuson Forest - Model 243 HV - Felling Harvester Brochure

    There are two versions of this final felling harvester available. The 243 HVT (Tilt) is equipped with the tried and tested upper carriage levelling system and allows for stress-free work in steep and poorly accessible terrain. The 243 HV has been designed without a slope compensator and allows for the heaviest use with the highest degree of ...


    By Neuson Forest GmbH

  • ProSilva - Model 810 - Fully Hydrostatic Driving Transmission Harvester Brochure

    roSilva 810 has a fully hydrostatic driving transmission. Big tires combined with small turning radius make ProSilva 810 an effective and agile forest machine. The modern safety cockpit offers the driver a top class working environment. Excellent ergonomics and visibility – semi-automatic air-conditioning as a ...


    By ProSilva Oyj

  • Model Keto-455 - Harvester Head Brochure

    Keto-455 is equipped with a broad tilt arm and swing roller system. This harvester model is especially suitable for thinning in demanding snow conditions. It handles even large and warped trees with ...


    By Kone-Ketonen OY

  • Model Keto-600 - Harvester Head Brochure

    Keto-600 is a heavy harvester head for traditional final felling, stack processing and hardwood harvesting. The multi-purpose functionality of this harvester head is based on a strong, simple structure. The head can be equipped with a fixed or swing roller ...


    By Kone-Ketonen OY

  • Eco Supreme - Model Keto-150 - Harvester Head Brochure

    Thinning and small scale final felling proceed smoothly as each operation is designed to take place accurately. Each operation has been taken into consideration in the structure of the head: grabbing the tree, sawing, starting the feed, accurate positioning for sawing and clean delimbing. The head has a fixed roller system, which means that there are fewer wearing parts and that the saw is always ...


    By Kone-Ketonen OY

  • Supreme - Model Keto-51 - Harvester Head Brochure

    Efficient contract thinning is only possible if each operation is performed efficiently and accurately. Each operation has been taken into consideration in the structure of the head: grabbing the tree, sawing, starting the feed, accurate positioning for sawing and clean delimbing. The head has a fixed roller system, which means that there are fewer wearing parts and that the saw is always in a ...


    By Kone-Ketonen OY

  • Eco - Model Keto-51 - Processor Harvester Head Brochure

    The structure of Keto-51 Eco Processor is based on the Keto-51 Eco Supreme harvester head. Thanks to its large grapple opening, it serves well as a multi-purpose harvester head that handles delimbing, cutting and sorting easily in mountainous terrains with steep slopes. If necessary, it can also be used for loading. The head has a fixed roller system, which means that there are fewer wearing ...


    By Kone-Ketonen OY

  • Eco Supreme - Model Keto-450 - Harvester Head Brochure

    Thinning and small scale final felling proceed smoothly as each operation is designed to take place accurately. Each operation has been taken into consideration in the structure of the head: grabbing the tree, sawing, starting the feed, accurate positioning for sawing and clean delimbing. The head has a fixed track system, which means that there are fewer wearing parts and that the saw is always ...


    By Kone-Ketonen OY

  • Rottne - Model H14C - Harvester - Brochure

    ROTTNE H14C is an easily operated harvester and a real powerhouse. An all-round harvester for both final felling and thinning capabilities. The harvester has a 6-wheel chassis with single rear axle and front portal bogie that ensures excellent ground clearance. ...


    By Rottne Industri AB

  • Cranab Forwarder and Harvester Cranes HC185- Brochure

    Cranab HC185Tryck: Vindelns Offsetreklam ABCranab HC185Cranab AB 922 82 VINDELN, SWEDENTel +46 933-135 00, Fax +46 933-617 36, Mail: info@cranab.se, www.cranab.com CRH 8,6 mCRH 10,1 mCRH 11,1 mHC185 8,6 mCRH 8,6 mCRH 10,1 mCRH 11,1 mHC185 10,1 mCRH 8,6 mCRH 10,1 mCRH 11,1 mHC185 11,1 mRight to alteration reserved. Pictures do not always show cranes in standard version.Max. reach 8,6 ...


    By Eqstra Industrial Equipment

  • Model 604C - Skidder - Brochure

    BENEFITS AND ADVANTAGES:• Powerful Cummins QSL9 300 hp Tier III engine• Efficient high-capacity cooling system • Automatic variable fan speed for improved fuel efficiency • Automatic reversing cycle to clean the heat exchangers • Cooling air is drawn from the rear, away from saw discharge• Compact, zero tail-swing design for thinning ...


    By Tigercat Industries Inc.

  • Procurement Of Forest Residues Brochure

    tries. The figures below show the potential and theactual use of biomass. It is evident from thesegraphs that the biggest potential to increase the useof biomass lies within forest residues and other bio-mass resources such as agrobiomass and fruit bio-mass. The largest biomass reserves can be found inFinland, Sweden, Germany and France, but alsoPoland and Spain have substantial volumes ...

  • Log Max - 6000Twin - Light Weight Head Brochure

    The new Log Max 6000 Twin is a light-weight head suitable for final felling. The delimbing unit is composed of five movable knives with patented positioning to minimize friction losses and increase the active pulling force. The knives have wide cutting edges for handling thick branches, their shape assures good delimbing and minimized damage to the log. Combining low weight with high power this ...


    By Log Max AB

  • Log Max - 7000C - Harvesting Head Brochure

    6000BHEADS ABOVE THE COMPETITIONwww.logmax.com6000B1 2 30 5 10 15 20 25 30 35 40 45 inTJ-2011-05-001 - Specifications may vary depending on equipment selected .We reserve the right to make changes in product specifications without prior notice.Feed roller optionsSteel, V-Steel, EucalyptusOptional equipmentAccumulation Kit, Auto Chain Tensioner,Eucalyptus equipment, Fixed protection plate,Field ...


    By Log Max AB

  • Model 718E - Tree Feller Bunchers - Brochure

    BENEFITS AND ADVANTAGES:Proven reliability, durability and high uptime • Legendary Tigercat centre section constructed with thick steel plate, large pins and tapered roller bearingsWideRangeTM drive for increased performance* • Tigercat's infinitely variable transmission increases travel speed for quicker bunching cycles and increased production Quick saw recovery • Optimized hydraulic ...


    By Tigercat Industries Inc.

  • Harvester Head Products - Brochure

    LOGSET TH Harvester HeadsS I M P L Y B E T T E R2The Titan Head series provides the right harvester head for all tree sizes. The latest innovations have been tested throughout before implementation, to ensure that each TH Harvester Head is above par and truly benefits the contractors and operators.Logset stands strongly for forest machine knowledge and quality. Logset leads the way for logging ...


    By Logset Oy

  • Malwa - Model 560H - Harvester Brochure

    Ideal for stand-operative thinning, felling trunks up to 42cm, and in areas where larger machines may damage land or watercourses. Weight from 5,400 kg. Length 5 - 7 m. Width 1.94 m (500mm wheels). Height 2.85 ...


    By Malwa Forest AB

  • Malwa - Model 560C Combi - Stand Operative High Performance Harvester and Forwarder Brochure

    Stand-operative, high performance harvester and forwarder in one. Powerful Category 3.4 engine complies with the new, more stringent environmental requirements. Harvester head with up to 42cm cutting diameter. Uniquely good handling and mobility. Conversion between harvester and forwarder takes about 20 minutes!. Weight from 4900 kg. Length 6.3 m. Width 1.94 m (500mm wheels). Height 2.85 ...


    By Malwa Forest AB

  • Model H7 - Harvester Heads Brochure

    The PONSSE H7 is a supremely compact, robust and powerful harvester head for demanding work at final felling sites. The small outer dimensions, powerful feed and excellent power-to-weight ratio guarantee productivity in both softwood and hardwood harvesting. Accurate automatic control ensures good cutting The PONSSE H7 is a supremely compact, robust and powerful harvester head for demanding work ...


    By Ponsse Plc

  • ROTTNE - Model F13D - Forwarder Brochure

    ROTTNE F13D is an all-round machine with high performance and high load capacity for those performing both thinning and final felling. The forwarder’s steerable wagon facilitates flexible work in the forest, leaving minimal damage behind it. ROTTNE F13D has 8 wheels and a load capacity of a full 13 tonnes, a hydraulically-controlled front gate and front bunk and a height-adjustable gate ...


    By Rottne Industri AB

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you