grapple saw Downloads

  • Model SG280 - Grapple Saw Brochure

    Grapple saw with tilt function - for installation on trucks, forest machines, excavators etc. This grapple saw works the same way as the popular smaller grapple saw SG220. It is a grapple saw that is suitable for felling and removing of trees and branches, for example, in parks and near power lines etc. The grapple saw also works perfectly on forest machines and excavators. It has no need for ...


    By Mecanil Oy Ab

  • Extreme Duty Grapple Saws Brochure

    Salvage and process blow down from the safety of the cab. Buck to length and trim withouthampering the ability to hoe chuck or load logs. Reduce waste at the sort by leaving it at the roadside or landing. Increase machine production and eliminate the need for a second ...


    By T-MAR Industries

  • SS550-10 Grapple Saws Brochure

    ????????? ????????????? ??? ???? ?????????????????????????????????? "?? ???#??$?%? "?? ???#???&?'?(?)???)*+????'?),)????,+????'?),)?-&? ?&&&&&&&&&&&&?.??.??/&'??/&'????????? ?? ?"???,"????"????? ??"??#?? ?????????#?? ?"???,"????"????? ??"????????? ??? ????????? ????0?????????1 2?)'?????3??????'&???4????-?,1 ?????5????)?????'???'?+?4?'???'?? ?????-????3????-6?'????,1 ????&??'-?-+?'?????)'??,1 ...


    By Hultdin System AB

  • SuperGrip - Model SG - Grapple- Brochure

    Patented tapered sleeve pin design eliminates any joint motion.  1000 hour greasing interval. Strong cushioned cylinder to reduce shock loads for up to 25 MPa working pressure. High strength and reliability minimize stagnation time. Grapple saw option available on all ...


    By Hultdins Inc.

  • SuperGrip - Model SGS - Grapple Brochure

    Tapered sleeve pin design eliminates any possible joint motion. Cushioned cylinders to reduce shock loads. Sealed bushings extend greasing intervals to1000 hrs. Dual push rods for balanced design. Grapple saw option available on all ...


    By Hultdins Inc.

  • CSI - DFH-3526 - Grapple Felling Saw Head Brochure

    www.cuttingsys.comCutting Systems, Inc. Call Toll Free: 1-877-844-1274The model DFH-3526 is a rugged and robust chain and bar dangle felling saw head designed for use on excavator type carriers. The head is expertly designed and built from the finest alloy steel to withstand the daily punishment of a felling operation.The head is equipped with a 3/4 pitch chain running on a 37" bar. The ...


    By Cutting Systems, Inc.

  • Grapple CR 280 pdf

    Cranab CR, CE, CITryck: Vindelns Offsetreklam ABCranab AB 922 82 VINDELN, SWEDENTel +46 933-135 00, Fax +46 933-617 36, Mail: info@cranab.se, www.cranab.com Technical dataBeing forestry specialists, we naturally offer a wide range of top-quality products. Cranab comprises grapples for global forestry, ideal for use on forwarders, trucks and excavators worldwide. ...


    By Cranab AB

  • CR Grapples pdf

    Cranab CR, CE, CITryck: Vindelns Offsetreklam ABCranab AB 922 82 VINDELN, SWEDENTel +46 933-135 00, Fax +46 933-617 36, Mail: info@cranab.se, www.cranab.com Technical dataBeing forestry specialists, we naturally offer a wide range of top-quality products. Cranab comprises grapples for global forestry, ideal for use on forwarders, trucks and excavators worldwide. ...


    By Cranab AB

  • Model UW180S - Felling Grapple Brochure

    UW180S Felling Grapple has fast and reliable saw unit. Saw unit has designed cut stems up to 22 cm diameter. UW180S Felling Grapple has high quali-ty delimbing system, resulting excellent delimbed timber. Energy- and firewood made by UW180S Felling Grapple dries well because the feed rollers brake bark of stems. As option UW180S Felling Grapple can be also equipped with length and volume ...


    By Usewood Forest Tec Oy

  • Model UW180G - Felling Grapple Brochure

    UW180G Felling Grapple with strong and powerful knife cutting is made for making high quality delimbed timber. Knife of UW180G Felling Grabble needs very little maintenance. Up to 18 cm diameter trees are cut easily with UW180G Felling Grapple. Delimbing knifes process stems with precision resulting excellent high quality timber. As option UW180G Felling Grapple can be equipped with length and ...


    By Usewood Forest Tec Oy

  • CSI - DL-4400 - Classic Slasher Saw Brochure

    gg#==ffiffiDL- PROFILE SAWBOX FORGREAT USIBILITY, AND EASYLOADING AND UNLOADING OFSTEMSAUTO ADJUSTING FEED SYSTEMAND HYDRAULIC CUSHION BARSTOP TO MINIMIZE CUT CYCLECAM TYPE CHAIN ADJUSTERFOR EASY BAR & CHAINMAINTENANCEJ ' ITIME\\f i ' +, .'- -e --? SligSBi"?b#HSHOWN WITH STANDARD CHASSISTHE SAW FORALLYOUR NEEDS DL. STYLE SAWBOX OFFERS BETTERVISIBILITY FOR THE OPERATORANDMORE ROOM FOR GRAPPLE ...


    By Cutting Systems, Inc.

  • Model R5500 - Saw Bars and Chains Datasheet

    With the R5500, we have increased the efficiency and decreased everything else. For the past 30 years, the only solution we had for increasing efficiency was to increase the RPM of the motors. We have done the opposite. R5500 turns everything you thought possible upside-down; we cut the RPM in half, but created a sawing unit that cuts up to 40% more quickly than traditional ...


    By JPS Teknik AB

  • CSI - MS-3100 - Swing Arm Saw Brochure

    Cutting Systems, Inc. Call Toll-Free: 1-877-844-1274 email@cuttingsys.comThe MS-3100 mounts permanently on the deck of the loader trailer, so there is no need to uncouple every time you move landings. Just swing the grapple around, catch the convenient foldaway loading handle, and set the saw on the loader trailer for transport. Once at the next landing site, grab the saw's handle, and set it ...


    By Cutting Systems, Inc.

  • Model GMT 035 - Felling Grapple Brochure

    Felling, chipping and/or transport of trees with one single machine.You wish to perform your sawing activities without extra manpower? And at the same time be productive, fast and efficient? You are looking for a professional, versatile product. Gierkink Machine Techniek can supply this equipment: the felling grapple GMT ...

  • Mecanil Products Brochure

    Mecanil XG220VERSATILE AND EFFICIENT ENERGY WOOD HEAD WITH BOTH SAW AND CUTTING-UNITThis is a giant leap forward in professional energy- and small wood harvesting. With this unique head you cut small bushes, twigs and thinner trees with a snap and fell bigger trees using the saw. The head also works perfectly as a traditional loading grapple. The XG220 is a combination of two of the most ...


    By Mecanil Oy Ab

  • ABAB Felling Head 251/350- Brochure

    ABAB FELLING HEADThe most productiveaccumulating felling headfor forest energy harvestingCutting diameter up to350 mm with efficientaccumulationUllevivägen 22, S-197 40 Bro, SWEDENTel. int. +46 8 584 00 130, Fax int. +46 8 584 00 131www.allanbruks.seeffective and sturdydesignlight-weight and agilehigh performance and durableABAB Energy Harvester is the optimal multifunction, accumulating felling ...


    By Allan Bruks AB

  • Model 608.2 - Bio Combine Machine - Brochure

    Vimek 610 BiocomBiPowered By cat® and Bosch rexrothVimek 610 BioComBi: is the most effective machine for thinning, felling and transport of bioenergy. Now with increased loading capacity to 5000 kg, a new and powerful engine with 60 HP from CAT and modern hydrostatic transmission from Bosch Rexroth. The increased working hydraulics gives improved and precise crane movement. Vimek brake link ...

  • ABAB Bioharvester 255- Brochure

    ABAB Bioharvester 255Allan Bruks AB • www.allanbruks.se • info@allanbruks.se • +46 8 582 505 00The new generation of felling heads for effective and fast thinning.• Faster dehydration of cut forest material giving a higher energy content• Compacts material for higher load weight on forwarder and truck• Cuts material into correct lengths, saves forwarding costsABAB Bioharvester 255 represents the ...


    By Allan Bruks AB

  • Silviculture and Biomass Head Brochure

    The Bracke C16.c is an accumulating felling head for silviculture and bioenergy. The head has a high accumulating capacity and a unique, patented cutting solution that produces extremely rapid cutting. The Bracke C16.c combines highly efficient clearing with the ability to make use of valuable assortments such as biomass. As a result, the head is suited for all types of mechanised felling, such ...


    By Bracke Forest AB

  • Model TR3200 - Tractor Tree & Brush Cutters - Brochure

    The Turbo Saw tractor unit is an ideal maintenance tool for land owners to remove invasive trees. The PTO powered cutting disc will cut as fast as an operator can back up. There are two tractor models: The TR3200 with Grapple, and the LT3200 with push ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you