hay tedder gear Downloads

  • VORTEX - Model G4V - Hay Tedder Brochure

    Robust tedder with hydraulic opening and closing rotor system, ideal for medium farms. Grease lubricated unit that allows easy maintenance of the main components. Available in 3 working width: 4.20 mt., 5.20 mt. and 5.70 mt. Crank for mechanical adjustment for all models. Standard hydraulic tilt on the G4V 570 PTH, available as an option on the G4V 520 PTH. Central wheels with fender. High ...


    By Enorossi

  • VORTEX - Model G2V - Hay Tedder Brochure

    Ideal for working in the hills where compact and small machines are required; closing the side protections, you will easily have a transport width of 2.5 mt. 3-point hitch model with pivoting wheels and pull-type version with fixed wheels. Provided standard with cardan shaft with slip clutch and protections. Mechanical crank for adjusting working ...


    By Enorossi

  • Model KW - Mounted Rotary Tedders Brochure

    Three-point mounted models with 4 and 6 rotorsKW 4.62/4, KW 5.52/4x7, KW 6.02/6, KW 6.72/6 and KW 7.82/6x7 – working at 4.60 m to 7.80 m (15'1' to 25'7') widths with rotors in various diameters. Central border spreading facility manual or hydraulic control (option). Convenient operation via a single-acting ...


    By Krone Holding GmbH & Co. KG

  • Model KW-T - Trailed Rotary Tedders Brochure

    Trailed models with 4 and 6 rotorsKW 5.52/4x7T, KW 7.82/6x7T, 5.50 m-7.80 m (18'1' - 25'7') work widths. Minimum input requirement . No load is taken off the tractor’s front axle. Easy tractor attachment/removal. Hydraulic pivoting drawbar moves conveniently into transport ...


    By Krone Holding GmbH & Co. KG

  • Lely Lotus Stabilo Tedders with Three Point Linkage Brochure

    innovators in agriculturewww.lely.comHighest output due to unique hooktinesLeLy LotusTedders22The wettest crop on top for fast and consistent dryingThanks to the position and shape of the unique Lely hook tines, the crop is thrown high and far behind the machine. A wet crop is heavier and is thrown farther away so that it lands on top of the drier crop; this guarantees an excellent tedding ...


    By Lely Holding S.a r.l.

  • Model RP - 3 Point Hitch Hay Rake Brochure

    Easy and efficient hay rake, suitable for any type of forage. The spring system of the tool holder allows raking wheels to adapt to any type of ground with the correct pressure without affecting the forage quality. Independent and interchangeable raking wheels mounted on tapered roller bearings. Teeth made of flexible steel ø 6,9 mm. RP 2C/3C models with hitch for small tractors. BS: split ...


    By Enorossi

  • Classic Mower- Brochure

    • Robust construction• Innovative• Ease of operationfella.euTwo-rotor and four-rotor rakesRAKESBRO_Mehrkreisel_2013_ENG_DV_ML.indd 1 13.08.13 12:21fella.eu• Independent series• Light and robust• High-quality equipmentForage harvesting machinesALPINEfefe_BRO_Alpin_2013_Englisch_DV_ML.indd 1 13.08.13 16:06? Durable design? Outstanding raking? Ease of handlingfella.euSingle-rotor ...


    By Farmec Ireland Ltd.

  • Products Catalogue Brochure

    1DISKOVÉ SEKACKYBETTER MACHINES BETTER PRICESn DISC MOWERS LATERALn DISC MOWERS FRONTn TEDDERSn RAKESn UNIVERSAL TEDDERS AND RAKESAgricultural machinery for fodder production PrahaThe ROZMITAL machines are already working in 18 European countries.1CONTENT DISC MOWERS LATERAL AND FRONT LATERAL SD - 260 ................................................ 4 SD - 260C ...

  • All Round Front Mounted Mower-SM 310 FP

    fella.eu Spur gear drive DISC MOWERS • Light • Efficien t • Robust MADE I N GERMA NY 2 FIRST-RATE HARVEST For more than 90 years, FELLA has always stood for innovative technology, outstanding quality and a personal passion for the service of agriculture. As the specialist for “Made in Germany” forage harvesting technology, we offer our customers all around the world an extremely ...

  • Disc Mowers-SM210FK,SM 260 FK, SM 260 FP

    fella.euSpur gear driveDISC MOWERS• Light• Efficient• RobustMADE IN GERMANY2FIRST-RATE HARVEST For more than 90 years, FELLA has always stood for innovative technology, outstanding quality and a personal passion for the service of agriculture. As the specialist for “Made in Germany” forage harvesting technology, we offer our customers all around the world an extremely wide range of products in ...

  • Pull Type Y Rake Brochure

    The special “Y” configuration of the Y-rake offers a clean raking over the whole working width without using central wheel. The articulated frame and independent raking wheels allow the rake to adapt to the most varied working conditions. Hydraulic opening and closing device, auto steering angle 90°. Front wheels with suspensions. Raking wheel Ø 150 cm. n°40 wheel teeth ...


    By Enorossi

  • AD Series - Auger Drives Brochure

    OMNI GEAR® TRACTOR POWERED IMPLEMENT GEARDRIVES PHD-15 Series Specifications Torque: 1750 lb.-in. 198 Nm. Ratios: 3:1 Gears: Straight Bevel Seals: Triple Lip Spring Loaded Bearings: Tapered, Ball, Needle Oil Cap: 25 oz. (0.7 L) Weight: 26 lbs. (11.8 kg) PHD-25 Series PHD-26 Series Specifications Torque: 5133 lb.-in. 580 Nm. Ratios: 2.92:1 Gears: Straight Bevel Seals: Triple Lip Spring ...


    By Omni Gear

  • Orchard - OS-40 - Sprayer Drives Brochure

    OMNI GEAR® TRACTOR POWERED IMPLEMENT GEARDRIVES PHD-15 Series Specifications Torque: 1750 lb.-in. 198 Nm. Ratios: 3:1 Gears: Straight Bevel Seals: Triple Lip Spring Loaded Bearings: Tapered, Ball, Needle Oil Cap: 25 oz. (0.7 L) Weight: 26 lbs. (11.8 kg) PHD-25 Series PHD-26 Series Specifications Torque: 5133 lb.-in. 580 Nm. Ratios: 2.92:1 Gears: Straight Bevel Seals: Triple Lip Spring ...


    By Omni Gear

  • PHD-15 Series - Feed Mixer Drive Brochure

    OMNI GEAR®TRACTOR POWEREDIMPLEMENT GEARDRIVESPHD-15 SeriesSpecificationsTorque: 1750 lb.-in.198 Nm.Ratios: 3:1Gears: Straight BevelSeals: Triple Lip Spring LoadedBearings: Tapered, Ball, NeedleOil Cap: 25 oz. (0.7 L)Weight: 26 lbs. (11.8 kg)PHD-25 SeriesPHD-26 SeriesSpecificationsTorque: 5133 lb.-in.580 Nm.Ratios: 2.92:1Gears: Straight BevelSeals: Triple Lip Spring LoadedBearings: Tapered, Ball, ...


    By Omni Gear

  • Alpine - Model TS 301 DS and TS 351 DS - Single Rotor Rakes Brochure

    Whether front or rear mounted, with the single-rotor rakes TS 301 DS and TS 351 DS, FELLA offers two all-round performers with rigid headrack for alpine terrain. Due to its low weight and short and compact attachment, these FELLA rakes can be used with a tractor performance level of as low as approx. 20 hp. Ideal for mountainous regions which demand powerful machines, while at the same time ...

  • Model TS 301 DN, TS 351 DN, TS 391 DN - Single Rotor Rakes Brochure

    The single-rotor rakes with trailing device from the 300 series are outstanding due to their low weight, their sturdy design, their ease of handling and their versatile use. These rakes can therefore be used with a tractor performance level of as low as approx. 23 hp. Perfect for use in different regions. Thanks to its 8 or 10 tine arms and 3 or 4 tines, each arm guarantees perfect and neat ...

  • Drum Mowers- Brochure

    DRUM MOWERSfella.eu• Powerful• Reliable• Robust2FIRST-RATE HARVEST For more than 95 years, FELLA has always stood for innovative technology, outstanding quality and a personal passion for the service of agriculture. As the specialist for “Made in Germany” forage harvesting technology, we offer our customers all around the world an extremely wide range of products in terms of mowers, hay tedders, ...


    By Braber Equipment

  • Model FC 860 - Forage Harvesters Brochure

    L frame, side mounted. Good weight distribution on the tractor, good control in hilly conditions. Upper Cut, low fuel consumption. New reinforced cutting drum, higher capacity with the same ...


    By Kongskilde Industries A/S

  • Rear Mounted Mower-KM 310 TL

    • Powerf ul • Reliabl e • Robust fella.eu DRUM MOWERS MADE I N GERMA NY 2 FIRST-RATE HARVEST For more than 90 years, FELLA has always stood for innovative technology, outstanding quality and a personal passion for the service of agriculture. As the specialist for “Made in Germany” forage harvest- ing technology, we offer our customers all around the world an extremely wide range of ...

  • Front Mounted Mowers-KM 230 FP - KM 270 FP

    • Powerful• Reliable• Robustfella.euDRUM MOWERSMADE IN GERMANY2FIRST-RATE HARVEST For more than 90 years, FELLA has always stood for innovative technology, outstanding quality and a personal passion for the service of agriculture. As the specialist for “Made in Germany” forage harvest-ing technology, we offer our customers all around the world an extremely wide range of products in terms of ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you