mechanically-weed-control Downloads
17 downloads found
With more than 10 years’ experience in the field of mechanical weed control, CMN maskintec A/S is the company with the most comprehensive expertise in this area. CMN maskintec A/S weeder harrows are known under the name CMN flex-weeder and are available in sizes from 1-20 metres. The main rule within mechanical ...
In times when the use of herbicides must decrease, mechanical weed control is a solution for dealing with high weed pressure. The weed cutter Bionalan cuts off the seed heads of the weeds above the crop to prevent further seed production and spreading. The tool has hydraulically driven rotary knives and a working height of between 15 and 180 cm. A large number of models with different working ...
Purpose ZUZA 3 machine is designed for mechanical weed control in crops growing in rows, at a spacing to allow passage of a tractor on a cultivated lane. ...
The PERFECT Terra Ranger has specially been developed to enable fast and effective tillage in the row. The machine consists of a combination of two counter-cutting tillers and intelligently positioned finger weeders, which remove vegetation on both sides of the grass stripe and in the row at a working speed of up to 15 km/h. ...
Effective equipment for soil management and the expert tool when fighting perennial weeds. The cultivator Kvickfinn is used in mechanical weed control and is a combination of a cultivator and a pick-up rotor. The custom made goosefoot cuts off the roots, processes the soil and lifts up the roots on the soil surface. The rotortines then grab the roots, throw them high into the air and far behind ...
The Weed-Master is specially designed for mechanical weed control in crops such as broccoli, cauliflower, Brussels sprouts, leek, beetroot, garlic and many other crops in rows or beds. The frame parts have a special parallelogram suspension, so the machine follows the ground perfectly under all circumstances. The patented rotating tines work very close to the plant or crop and pull up the weeds, ...
70% of the weeds can be destroyed with mechanical weed control. The remaining 30% do not damage the culture plant decisively. From the mentioned 70 %, 70 % of the weeds are covered in the germination stage and only 30 % of the weeds are destroyed by being pulled out.Therefore correct timing of the operation is crucial.The Einböck Tined Weeder AEROSTAR with a line spacing of 2.5 cm (lichter ...
The ZF is an inter-row rotary cultivator for all types of ridge cultivation. The driveline runs along the top so there is enough clearance to work in high crop. The ZF is ideally suited to tillage (ridging) and mechanical weed ...
The Row-FiX Space is a versatile inter-row rotary cultivator for all types of ridge cultivation. The driveline runs along the top so there is enough clearance to work in high crop. The Row-FiX Space is ideally suited to tillage (ridging) and mechanical weed control. Due to the modular construction of the gearboxes and cultivator units, the machine is available from 2 to 8 rows. With 6 rows or ...
The Row-FiX is a versatile inter-row rotary cultivator for all types of ridge cultivation. The driveline runs along the top so there is enough clearance to work in high crop. The Row-FiX is ideal for tillage (ridging) and mechanical weed control. Due to the modular construction of the gearboxes and cultivator units, the machine is available from 2 to 8 rows. With 6 rows or more, the Row-FiX is ...
Of course, the seed drill, too, has to be equipped with an exact autotrack RTK machine control. In general, GPS controlled attachments are a large field of research for the future.— The StripTill method that in Europe has con- siderably been marked by Horsch has gained more and more importance in farming in the course of the last years. ...
Fine adjust single point depth control is standard to ensure the perfect working depths by controlling cylinder stroke from a single point on the machine.699 Disc CultivatorDesigned for seed bed preparation and weed control in the toughest residue conditions.The 699 Disc Cultivator combines residue management with the ...
Fine adjust single point depth control is standard to ensure the perfect working depths by controlling cylinder stroke from a single point on the machine.699 Disc CultivatorDesigned for seed bed preparation and weed control in the toughest residue conditions.The 699 Disc Cultivator combines residue management with the ...
Residue can also interfere with efforts to manage pests such as weeds, insects and disease. However with the right tools the benefits of residue far outweigh the cost of residue management. ...
Residue can also interfere with efforts to manage pests such as weeds, insects and disease. However with the right tools the benefits of residue far outweigh the cost of residue management. ...
Residue can also interfere with efforts to manage pests such as weeds, insects and disease. However with the right tools the benefits of residue far outweigh the cost of residue management. ...
The mounted CombiDisc compact disc harrow in its 3 m working width is ideally suited to high forward speeds, especially when sowing with a harrow-mounted seed drill. With working depths of 3 cm to 8 cm, an optimum seedbed is created. The wide roller programme offers, for any soil type, the most suitable roller for the optimum ...