planter-attachment Downloads
7 downloads found
The 2967-029A/097A Short, Floating Residue Manager is designed for planters with 30", 36", and 40" rows. The operating angle of the wheels is designed for these row-unit spacings and for faster planting ...
Take control from the cab with the pneumatic 2940 Air Adjust Residue Manager, available in wide and narrow models. Integrated using an in-cab controller with easy-to-use adjustment buttons and five presets, the Air Adjust Residue Manager allows you to cover more ground in less time and makes it easy to adapt to planting conditions, which change every hour every ...
The following table shows torque in ft. lbs. 5ASSEMBLY INSTRUCTIONS STEP 1. Attach the 2959-203 fert. coulter faceplate w.a. to the planter unit using 3) ½-13 x 1 ½” bolts, flat washers and locknuts. ...
In extremely dusty environments and when liquid fertilizer is being applied with the planter, it may be necessary to grease hubs daily. Grease to purge; it is not possible to over-grease hubs. ...
If you need to work on your Dawn tool, make sure to support it before partially or fully removing it from the attachment points. Do not adjust your Dawn tools while they are moving. ...
Population rate changes are simply made by using a planter-type rate transmission (chart and sprockets provided) that changes the ratio between the ground drive wheel and the drill drive shaft. ...
Population rate changes are simply made by using a planter-type rate transmission (chart and sprockets provided) that changes the ratio between the ground drive wheel and the drill drive shaft. ...