potting Downloads

  • Premium

    HortFiller Flat and Pot Filler - Operating Manual

    The Horticulture Equipment and Services LLC Flat Filler is designed to fill plug trays and bedding flats up to eighteen inches wide, and pots up to fourteen (14) inches tall. The Horticulture Equipment and Services LLC Flat Filler was fully tested at the factory. The specifications in this manual were in effect at the time of manufacturing; however, Horticulture Equipment and Services LLC ...

  • Premium

    Sauereisen - Model No. 76 - Electrical Potting Cement - Brochure

    Electrical Potting Cement No. 76 is a castable, hydraulically-setting cement used as a bonding mortar or refractory coating for high-temperature assembling, encapsulating and potting ...


    By Sauereisen Inc.

  • Premium

    Sauereisen - Model No. 11 - Thermal Potting Cement - Brochure

    Sauereisen Thermal Potting Cement No. 11 is primarily used where high electrical insulation and thermal conductivity are desired. No. 11 is a chemical-setting cement ideal for potting applications subject to high temperature and thermal shock. Thermal Potting Cement No. 11 is formulated to be compatible with most metal alloys that it may contact. The cement is supplied in powder form and need ...


    By Sauereisen Inc.

  • Premium

    Sauereisen - Model No. 13 - Zircon Potting Cement - Brochure

    Sauereisen Zircon Potting Cement No. 13 is primarily used where high electrical insulation and thermal conductivity are desired. No. 13 cures by a chemical-set and is ideal for potting applications subject to high temperature and/or thermal shock. Formulated as an economical, zircon-based cement, No. 13 is non-corrosive and compatible for applications with ceramics, glass and most metals. The ...


    By Sauereisen Inc.

  • Premium

    Sauereisen - Model No. 32 - Potting Cement - Brochure

    Sauereisen No. 32 Potting Cement is a chemical setting cement based on a sodium silicate binder,that exhibits an extended potlife. For ideal performance, the cement should be heat cured at 150oF (65oC) to induce a final set after application. The cement is ideal for bonding ceramics, glasses or most metals. No. 32 can be applied in thicker applications without ...


    By Sauereisen Inc.

  • Plug Magnetic Pot Brochure

    Magnetic Pots are usually made with iron housing structure and Alnico Magnets, suitable for high operating temperature, up to 450 °C. Usually these pots have inside threaded holes and are nickel ...


    By Calamit S.r.l.

  • Pot-in-Pot Planter Brochure

    Nurserymen know trees, plants and shrubs planted in pots that are buried in the ground stand up to winter winds and cold temperatures better than those in above-ground pots. GK Machine’s Pot-in-Pot Planter helps get those pots in and out of the ground fast and efficiently. Nursery pots are set in the ground and liner pots containing the plants are inserted, making a double pot system that ...


    By GK Machine, Inc.

  • POT & GO - Potting Machine- Brochure

    The innovative potting machinery, model POT & GO, represents a new vision of the concept of potting : optimising logistic efficiency and minimising labour cost. The machine was designed and built to enable potting operations as near as possible to the work area in greenhouse or land area in order to optimise time and number of operators required. The machine conveniently operates on varied ...


    By CRF Costruzioni S.r.l.

  • Priva - Potted Plants Brochure

    Potted plants: everything must be right for good crop planning. Planning is a crucial for a potted plant grower: the plants must reach a certain size and quality by a predetermined time. The wide variety of crops presents an additional challenge.  With phalaenopsis, for instance, a whole greenhouse compartment will be full of plants at the same stage of growth. In the case of green plants, ...


    By Priva

  • Urbinati - Model IM1800 - Potting Machine Brochure

    Potting machine IM2800 with vibrating table for pots with big dimensions. Vibration allows an excellent filling without creating air bubbles with big-rooted plants. Bottom belt with mechanicall adjustable speed and sliding on rollers; double push button control; single or double chute; soil recycling system with the belt on the bottom; manual and automatic working with vibrating support with the ...


    By Urbinati S.r.l.

  • Urbinati - Model IM2800 - Potting Machine Brochure

    Potting machine IM2800 with vibrating table for pots with big dimensions and hopper of higher capacity supplied with the machine. Vibration allows an excellent filling without creating air bubbles with big-rooted plants. Bottom belt with electronically adjustable speed and sliding on rollers; double push button control; single or double chute; soil recycling system with the belt on the bottom; ...


    By Urbinati S.r.l.

  • Potting Machine- Brochure

    Drills and pot holders are available in nearly any size. Drill plates and container distribution forks can be supplied as well, just like the necessary compressor and electricity cables. Any other special requirements can be produced at the well-equipped facility of Martin Stolze ...


    By Martin Stolze b.v.

  • Potting Robot Machine Brochure

    The potting-robot has been developed to pick up a couple of pots and to put them down in another place, for example, from a conveyorbelt to a mobile ...


    By HETO Agrotechnics

  • EP - Pot Dispenser Brochure

    The EP Pot Dispenser will dispense from 6” to 12” pots and can be fully integrated with the EP2200 and EP2200 EX. It can also be added to other potting machines dependent on type and size This dispenser is extremely easy to setup and adjust. The pots are loadedby the in-feed conveyor which can be preloaded with several stacks of pots. Pots are picked up and stripped by helical rollers which feed ...


    By Bouldin & Lawson, LLC

  • Model 4016 - Potting Machines Brochure

    The 4016 is large enough for heavy filling.  It can process pots up to 42 cm and drills plant holes up to 23 cm.  With the machine, bare roots can easily be potted.  The pot ring is voluntarily kept low to enable ergonomic potting.  Thanks to the central adjustment of the potting ring it is not difficult to switch to a different  pot size.   The pot dispenser ...


    By Demaitere bvba - demtec

  • Model H15 - Potting Machine Brochure

    The pottingmachine is an universal machine for automatically filling pots with a diameter of 5,5 to 24 cm. By an adjustment it is possible to use the diameter of the flower pots to expand to 48 cm. In other words: the pottingmachine is suitable to fill sizes from mini pots to buckets ! To drill a plant hole is also one of the standard functions of the HETO pottingmachine H15. Several drill holes ...


    By HETO Agrotechnics

  • Smart - Mobile Potting Machines Brochure

    The SMART is a compact mobile machine that is easily adjustable. It has all the same advantages as a larger machine: high processing speed up to 4,500 pots/hour, easily adjustable pot dispenser and a powerful drilling device. The soil supply system is automatically dosed so the soil is not unnecessarily resupplied. The pot size can be changed in a few seconds. The machine is very popular with ...


    By Demaitere bvba - demtec

  • Model 3016 - Potting Machines Brochure

    The 3016 fills both small pot sizes at high speed and larger pots (up to 35 cm) by means of a 1 on 2 adjustment.  The machine is standard equipped with a powerful and speed-controlled drill setting.  Big favourite of bed plant growers because this machine also easily processes flower baskets, and of tree nurseries where also larger pot sizes (besides 2l and 3l pots) can be ...


    By Demaitere bvba - demtec

  • Model Economy Series - Pot Feeders Brochure

    The Economy Series Pot Feeders, Bypass Feeders, and Shot Feeders, at web competitive pricing, are ideal for the aftermarket where cost considerations are ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you