straw chopper Downloads

  • Model EM - Straw Choppers- Brochure

    The EM model chopping system has a roller with blades and a control system that prevents the entry of the product which avoids it jamming at the entrance of the turbine and allows it to be chopped and then distributed both as straw and silage. This model is used for the distribution of straw for bedding and feed silage. Our straw choppers are designed in a compact and robust fashion to ensure ...


    By Tatoma Grupo

  • Model YSP - Horizontal Straw Chopper Brochure

    Chopping of the stalks which are left behind after harvesting in herbal production like sunflower, corn, cotton, and cereals is important for agriculture. Burning of stubbles is prevented. After burning operation the great part of the water is wasted so water and wind erosion increase and the soils moisture holding capacity decreased. It is possible to provide a stable upper lever against to ...


    By Atespar Ltd

  • Model TPF 15 - Straw Chopper Brochure

    This extraordinary model TPF straw chopper cuts up loose straw and bales in a flash to exactly the right size and roducing virtually no dust! The TPF straw chopper gives you bedding to suit your needs, ranging from one to 10 centimetres in length. All you have to do is mount the right size screen to suit your requirements. This versatile chopper grinds any kind of loose or pressed straw, and hay. ...


    By Caravaggi S.r.l

  • Model D-300 and D-600 - Poultry Straw Chopper- Brochure

    The chopping system of the D model consists of a turbine with blades surrounded by a grid that acts as a sieve. Inside it is a hammer system that  guarantees  more uniform and better chopping. This model is designed for use in poultry farms and is only recommended for dry straw. Optionally,  a roller with blades can be fitted for additional chopping (Model DM). Our straw choppers ...


    By Tatoma Grupo

  • KV Chopper Range - Brochure

    Choppers for all conditions The hallmark of Kverneland grass and straw choppers is their ability to cope with whatever is required. Whatever the size, every model is built for a variety of different tasks. However, all models are solidly constructed throughout with a robust gearbox and very strong power transmission to the “V” belts driving the shafts. In addition, they have a ...


    By Kverneland Group

  • Beet Choppers Brochure

    Self loading beet and meal feeder.#7;Half ton capacity.#7;Hydraulic driven. #7;Can be fitted on 3 point linkage or front ...


    By Bridgeway Engineering

  • Patz - Model 9427 - Choppers Brochure

    9427 ChopperQUADRA-SHARK®blade sets a higher standard in chopper performance.Patented unique, one-piece, four-point, double-edge rotor blade is designed for chopping and long life. The 3/16-inch (4.7 mm) thick, through-hardened steel blades are beveled and serrated for effective cutting action and provide plenty of strength for tough cutting conditions. No bolts, rivets, or welds on the blade, ...


    By Lloyd Cross Sales & Service

  • CFR 650 - Feed Chopper Brochure

    CFR650 / CFR651Box 307, Hwy 27Vonda, SK. S0K 4N0800-665-2010www.highlinemfg.com307 Hwy 27Printed in Canada.Confi guration Double rowHorsepower required 90 HPHydraulic outlets required 2Capacity 14 - 5’ balesTires Eight 11L x 15, 12 ply rating; GVW 38,000 lbsBed length 37’Overall length 43’ 4”Transport width 16.75’Shipping weight 9660 lbsDrawbar weight 1740 lbsHighline makes picking bales a breeze ...


    By Highline Manufacturing Ltd.

  • Model FM - Grass Chopper Brochure

    The Kverneland FM grass chopper is a small, medium-duty machine for use on slightly rough ground and other green areas: in amenity areas, for tidying up pasture and in similar situations. The Kverneland FM is suitable for tractors up to 50 hp. It is available in 0,90m; 1,20m; 1,50m and 1,80m working ...


    By Kverneland Group

  • Model FHP - Multipurpose Chopper Brochure

    The Kverneland FHP is a new multipurpose chopper for road maintenance, clearing out field edges, ditches and hedges. In addition the FHP shows versatility in operation on grass, light wood and bushes thus being ideal for the maintenance of parks, gardens and road sides. The Kverneland FHP is suitable for tractors up to 100hp and is available in 1.55m, 1.85m and 2.00m working ...


    By Kverneland Group

  • Chopping and Distributing Machine-Mini Straw

    NUOVO TRINCIADISTRIBUTORE DI PRODOTTI DA LETTIERA.Nuovo. Nuovo Design. Nuovo nelle prestazioni. A potenza ridotta sminuzza, sbriciola, sfibra,taglia a partire da 1 centimetro la paglia da lettiera, aumentandone l’assorbenza.NEW CHOPPER DISTRIBUTOR FOR BEDDING MATERIAL.New. New Design. Enhanced performance. Minces, crumbles and cuts straw bedding materialat low power starting from 1 cm, increasing ...


    By Crono s.r.l.

  • Rekord-Chaff Spreader Brochure

    We are supplier toRekordeverken Sweden ABÖttum, SE-535 92 Kvänum, SwedenPhone +46 511 30300 Fax +46 511 30301info@rekordverken.sewww.rekordverken.seRekord innovations have helped the farmers with the residue issue in over 55 years.Rekord have also equipment to old combinesRekord develop and produce straw choppers and chaff spreaders for combine harvesters manufacture world wide.Rekord ...


    By Rekordverken Sweden AB

  • Rekord- Combi System Brochure

    Spreading of chaff and straw on combines The Combi system A new concept developed by Rekordverken Sweden AB Resulting in: High flexibility High efficiency Low energy requirement Low environmental impact Higher demand on husk treatmentThe development during recent years within agricultural have put higher demands on the straw chopper and chaff spreader for combines. The main ...


    By Rekordverken Sweden AB

  • Rekord - Plus System Brochure

    Spreading of chaff and straw oncombine harvestersThe Plus systemFor outstanding spreading performance and low energy requirementA new concept developed by Rekordverken Sweden ABHigher demand on husk treatmentDuring the last years the importance of a proper function of the distribution equipment for chaff and straw has been increasing. The main reasons for this are:•The development of larger ...


    By Rekordverken Sweden AB

  • Double Master Plus Side Pull Combine Brochure

    For more information see your local authorized Pickett Equipment dealer www.pickettequipment.com 1-800-473-3559 Double Master Plus SP2 Combine Swivel Gear Box For Full RPM Turning Unsurpassed Seed Quality and Clean Out Central Flow Threshing Cylinder For more information see your local authorized Pickett Equipment dealer www.pickettequipment.com 1-800-473-3559 Double ...


    By Pickett Equipment

  • Twin Master Edible Bean Combine Brochure

    Twin Master Combine For more information see your local authorized Pickett Equipment dealer www.pickettequipment.com 1-800-473-3559 Central Flow Threshing Cylinders Tongue Tilted For Transport Single Stage Dump Bin Twin Master Combine Standard Features: *Heavy duty drive train equipped with: *Cam type cut-out clutch *Over running clutch *1000 PTO input, 2 speed transmission: ...


    By Pickett Equipment

  • Bale Pro - Model CFR 1251 - Dual-Chamber Bale Processor Datasheet

    For more than 20 years Highline Manufacturing, based in Vonda, SK, has been designing and building bale processing equipment for North American cattle producers. The latest innovation from Highline is the CFR 1251 bale processor. The 1251 Bale Pro®, a dual-chamber bale processor, provides the ?exibility to process two bales at once and blend them into a healthy ration. With winter feed costs ...


    By Highline Manufacturing Ltd.

  • KME Agricultural Brochure

    Our product range for our agricultural range of ...


    By KME-Agri

  • CFR - 650 - Topgun Brochure

    125 o106 oOperator ZoneCFR650Box 307, Hwy 27, Vonda, SK. S0K 4N01-800-665-2010 or 1-306-258-2233www.highlinemfg.comF e a t u r e s a n d s p e c i F i c a t i o n sPrinted in Canada.Rear DeflectorTub Top Deflector Discharge End CurtainsQuick engage clutch.Balanced floating auger allows wads to pass through.Easy to use control box.With the door open, the auger paddles hay into a windrow.We Are ...


    By Highline Manufacturing Ltd.

  • Hillside Combines-M310 MCS

    M310MCSM300MCSM310M300SERIES2 3Productivity and reliability as standard featuresA TOTALLY NEW IMAGE FOR THE M 300 SERIES, EMPHASIZED BY THE NEW LOGO, AN ICON OF CHANGEIt has been designed to meet operator requirements to ensure the best working conditions and therefore optimising productivity.coMfortCABEmission level stage III/B SCR and DOC technology Agco Power engines designed for low fuel ...


    By Laverda S.p.a.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you