tedder Downloads

  • ARIES - Hay Tedders Brochure

    Standard pivoting 3 point hitch with shock absorbers and automatic lockrelease system - Standard mechanical centralized oblique position setting - Finger-joint coupling - Forks with tines of different length - Quick and easy incidence adjustment - Standard tyres ...

  • Tedder Literature

    2014 TEDDERSHaying in high moisture climates? With above normal rainfall? Or, just trying to close the gap between cutting and baling to shorten drying times and reduce nutritional losses in your downed hay and forage? Check out the Vermeer TE Series Tedders with their unique, patented hook tine design.Why hook tine tedders? TE Series hook tine tedders offer three important benefits – ...


    By Vermeer

  • Vermeer - TE330 - Tedder Specifications

    Home > Equipment > Tedders > TE330 TE330 Specs Dimensions and Weights - ApproximateTransport Height 114" 289.6 cmTransport Width 118" 299.7 cmTransport Length 227" 576.6 cmWorking Width 402" 1021.1 cmWeight 5260 lbs 2385.9 kgTire Size - Transport 10.0 x 75-15.3 - 10plyTire Size - Rotors 16 x 6.5-8 - 6plySpecificationsBasket Height 5 position on the basket wheelBasket Angle AdjustmentInfinitely ...


    By Vermeer

  • LYBRA - Hay Tedders Brochure

    Three point swivel hitch and double shock absorbers - Automatic locking for transpor in full safety:the machine is constantly aligned with the tractor - Centralized oblique positioning device for a accurate work along fences or sidelines -Low power ...

  • Vermeer - TE250 - Tedder Specifications

    Home > Equipment > Tedders > TE250 TE250 Specs Dimensions and Weights - ApproximateTransport Height 108" 274.3 cmTransport Width 118" 299.7 cmTransport Length 183" 464.8 cmWorking Width 300" 762 cmWeight 3200 lbs 1451.5 kgTire Size - Transport 10.0 x 75-15.3, 10plyTire Size - Rotors 16 x 6.5-8, 6plySpecificationsBasket Height 5 position on the basket wheelBasket Angle AdjustmentAdjustable by ...


    By Vermeer

  • FELLA - Model SANOS 401 DS - 601 DN - Tedders - Brochure

    The quick way to dry forage. Optimised for Alpine terrain thanks to lightweight design. Perfect in combination with a RAMOS front-mounted ...

  • Model 200P - Rotary Tedder Brochure

    Rotary tedder with two rotors, it is mounted to the rear tractor lifter, acted by the power take-off. It has 2 rotors with 5 arms ...

  • Model 400P - Rotary Tedder Brochure

    Rotary tedder with four rotors and fixed frame; it is mounted to the rear tractor lifter, acted by the power take-off, with 4 rotors with 5 arms ...

  • Model P4 - Rotary Tedder Brochure

    In SaMASZ offer there is six tedder models. Four models with 4-rotors: P 4 - 470 and P 4 - 530, P 4 - 530 C (trailed version) and P 4 - 531, as well as 6-rotor models P 6 - 650 and P 6 - 770. Owing to their high efficiency, quality and durable design, rotary tedders became well-known to the Polish market and are winning foreign farmers’ ...


    By SaMASZ Sp. z o.o.

  • Pequea - Model 710 & 910 - Fluffer Tedders Brochure

    The Pequea Fluffer Tedder's unique action gently lifts and releases hay with minimum damage to leaves. Labor saving, it allows you to aerate hay as a last step before baling or chopping. The Fluffer Tedder gives you better control over how your hay dries no matter how you put it up and allows air to move through your hay for faster drying so the cure is uniform. This is an all-around ideal unit ...


    By Pequea Machine Inc.

  • Model HIT - 4 Rotors Tedders Brochure

    From 4.40 to 5.20 m working ...


    By PÖTTINGER Landtechnik GmbH

  • Hesston - Model TD Series - Tedders Brochure

    The TD Series Tedders from Massey Ferguson. Beat the rain or just accelerate the whole hay drying cycle by spreading your crop with a professional-grade Massey Ferguson TD Series tedder. We offer 10 models with widths up to 41’ 8”. TD Series tedders feature true commercial-grade construction with induction-hardened, break-resistant rotor heads for increased durability. Their ...

  • Rhino - Model PT - Hay Tedders Brochure

    Easy manual height adjustments. Slip clutch driveline protection. Six spring steel tines per rotor. 5-10 MPH operating speeds. Low horsepower requirements. Narrow 10' transport ...

  • Fleming - Model G5.2TED - Hay Tedder Brochure

    The Hay Tedder is an ideal machine to spread, air and turn all types of forage in any type of terrain. It allows a perfect and even spreading of forage. Tines pick up a small quantity of forage on every turn of the rotor and lay forage on the ground perfectly aired without damage or dirt. With an hydraulic lift system on the two outer rotors this allows the operator to put the machine in working ...


    By Fleming Agri-Products Ltd

  • Model KW-T - Trailed Rotary Tedders Brochure

    Trailed models with 4 and 6 rotorsKW 5.52/4x7T, KW 7.82/6x7T, 5.50 m-7.80 m (18'1' - 25'7') work widths. Minimum input requirement . No load is taken off the tractor’s front axle. Easy tractor attachment/removal. Hydraulic pivoting drawbar moves conveniently into transport ...


    By Krone Holding GmbH & Co. KG

  • VORTEX - Model G4V - Hay Tedder Brochure

    Robust tedder with hydraulic opening and closing rotor system, ideal for medium farms. Grease lubricated unit that allows easy maintenance of the main components. Available in 3 working width: 4.20 mt., 5.20 mt. and 5.70 mt. Crank for mechanical adjustment for all models. Standard hydraulic tilt on the G4V 570 PTH, available as an option on the G4V 520 PTH. Central wheels with fender. High ...


    By Enorossi

  • Model KW - Mounted Rotary Tedders Brochure

    Three-point mounted models with 4 and 6 rotorsKW 4.62/4, KW 5.52/4x7, KW 6.02/6, KW 6.72/6 and KW 7.82/6x7 – working at 4.60 m to 7.80 m (15'1' to 25'7') widths with rotors in various diameters. Central border spreading facility manual or hydraulic control (option). Convenient operation via a single-acting ...


    By Krone Holding GmbH & Co. KG

  • VORTEX - Model G2V - Hay Tedder Brochure

    Ideal for working in the hills where compact and small machines are required; closing the side protections, you will easily have a transport width of 2.5 mt. 3-point hitch model with pivoting wheels and pull-type version with fixed wheels. Provided standard with cardan shaft with slip clutch and protections. Mechanical crank for adjusting working ...


    By Enorossi

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you