vine pruner Downloads

  • Model VS 98 S - Pre-Pruner Brochure

    Model VS 98 S is ideally suited for use where there is very vigorous canopy growth. To protect the wire trellis, the saw blades are surrounded by a screen and arranged on one side only. The staggered pressure discs continuously guide the vine stems to the saw blades and so ensure clean cutting. The VS 98 S is available with cutting lengths from 18 cm (three saws) up to 81 cm (ten saws) in steps ...


    By Binger Seilzug GmbH & Co. KG

  • Model VSL 07 P - Pre Pruner Brochure

    The VSL 07 P is the lightest model in the Binger Seilzug range of Pre-Pruners. Counter-rotating shearing discs cut the vines at the desired height. The exposed shearing discs are not susceptible to blockage and so permit cutting back before the leaves have fallen. Two frame sizes permit nine different cutting lengths between 21 and 77 centimetres. This ensures optimum adaptation of the machine to ...


    By Binger Seilzug GmbH & Co. KG

  • Red Rooster Harvest & Pruning Catalog

    RED ROOSTER™RED ROOSTERPRUNING & HARVEST TOOLSRED ROOSTER™ AG PRODUCTSP.O. BOX 13621SACRAMENTO, CA 95853PHONE: 916-922-8099FAX: 877-922-2472Website: redroosterag.comEmail: info@redroosterag.comCerti? ed Small BusinessGSA RegisteredDUNS# 009186982Cage# 40207RED ROOSTER™ 20" PROFESSIONAL PRUNER• Designed for close-in pruning• Ideal for vine pruning • 1 1/4" cutting capacity• Precision Japanese ...


    By Red Rooster Ag Products

  • Zenport Catalog

    IndustrIesIndustrIesMANUFACTURER OF QUALITY HORTICULTURE TOOLS FOR THE PROFESSIONAL• Horticulture • Arborculture • Landscaping • Gardeningwww.zenportindustries.com1IndexPruners. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-4Harvest/Thinning.Shears. . . . . . . . . . . . . . . . . . . . . . . . ...


    By Zenport Industries

  • Model DH8300 - Front Mount 3-Point Hitch Brochure

    The new Edwards front mount 3-point hitch enables you to mount many of your 3-point implements on the front of your tractor. Front mounting offers several advantages including the use of front and rear implements at the same time. That reduces the number of passes over the same ground plus it saves fuel and reduces man and tractor hours. The front mount 3-point hitch mounts easily and quickly to ...


    By Edwards Equipment Company

  • VINESCOUT - Tractor Control Systems Brochure

    Computer supported tractor control systems are the future of agricultural technology and make an essential contribution to working more efficiently. The new tractor steering system, VINESCOUT, from Clemens can be adapted to all tractors with hydraulic ...


    By Clemens GmbH & Co. KG

  • GSG - Model AN 2 and N 2 - Self Operating Sprayer Brochure

    The GSG over-row fan sprayers are a new range in the field of plant protection. They are fitted with hydraulically driven cross-current fans. With the 2, 3 and 4-row machines, a new configuration of the fans and a recycling system mean that up to 40% less crop protection agent is used in the course of the ...


    By Clemens GmbH & Co. KG

  • Breaker Plough Brochure

    Breaker ploughs are equipped by own board hydraulic. Oil circulation system is created by a double pump which is attached to PTO shaft. Gear will be plugged in to PTO stub of tractor (profile Z6 - 1 3/8“). Machines shall be driven by number of revolution of maximum 540 r/min Without difficulty old plants can be taken out of the ground which is taken by means of spin roll catapulted out on ...


    By Clemens GmbH & Co. KG

  • Teractiv - Soil Cultivator Brochure

    The special kinematics of the mechanical NON-STOP overload protection work continuously and sustainably loosen the soil. Tools are pulled in quickly due to the special blade shape. Any organic matter can be reliably worked in, producing an intensely mixed soil. The width of the solid frame can be adjusted from 1,100 to 1,600 mm (extensions of up to 2,100 mm are available). The right- or left-side ...


    By Clemens GmbH & Co. KG

  • TERACTIV DUO - Soil Cultivator Brochure

    With the TERACTIV DUO, you have the option of cultivating either the entire row or just the area around the vine in a green row. To make this possible, the frame with its flexible tines lifts through at an angle of 75° and the roller folds under. This stabilises the frame when working in the area between vines, as it rests on the grass track. This allows it to move smoothly and maintains a ...


    By Clemens GmbH & Co. KG

  • Subsoilers - Model TLK 883 - Soil Cultivator Brochure

    The subsoilers from CLEMENS were developed specially to break up compacted areas powerfully and enduringly. The cutting action reactivates the roots so that they can finally start to grow properly again. The soil is optimally aerated and its ability to retain water is maximized. Plants can take up nutrients more efficiently again, remain healthy and deliver higher yield! Mechanization is becoming ...


    By Clemens GmbH & Co. KG

  • Model PR7 and PR9 - Soil Cultivator Brochure

    Narrow all-purpose plough with hydraulic width adjustment. It is particularly suitable for use in nurseries, in vineyards with narrow spacing between rows and for other row ...


    By Clemens GmbH & Co. KG

  • HEXAGON - Model 724 - Soil Cultivation Brochure

    The robust all-purpose machine for soil cultivation or as tool carrier.HEXAGON 724 as an equipment carrier with a Radius on both sides.Solid hexagonal profiled frame, hydraulically or mechanically adjusted. Optimum height guidance by crumbling roller with spindle adjustment. Extension frame for high passage. Compact design for attachment of a rotary harrow or tiller. Machine mount for the ...


    By Clemens GmbH & Co. KG

  • LittleLOAD - Model RK 45008 - 8 Inch Shrub Rake Brochure

    For small to medium branches. 3-Sided razor teeth for efficient cutting, 7' blade. Impulse-hardened teeth for long service life. Curved-blade design for faster cutting. Replaceable, curved, taper-ground folding blade. Ergonomically designed, comfortable, co-molded ...


    By Corona Clipper, Inc

  • Model SL 7180 - Forged Dual Cut Bypass Lopper Brochure

    Fully forged steel construction for strength. Enhanced performance with large cuts due to patented* blade and hook design delivering 20% more cutting power**. Shock-absorbing integrated bumper. Comfortable handle with contoured soft grip, fits various hand sizes. Easy to resharpen. No-fail metal end ...


    By Corona Clipper, Inc

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you