vine shoot Downloads

  • Bioalcazar - Vine Shoot Mulcher Brochure

    The Bioalcazar Vine Shoot Mulcher with large capacity, hydraulically operated catcher is specially designed to shred all kinds of vine shoots and operates with the tractor in forward drive. Its pick-up feeder passes the vine shoots into the shredding chamber while preventing the entry of any stones. Its sieve ensures fine and uniform shredding. The shredded material is sent to the ...


    By Picursa

  • Model SP - Vine Shoot Tipping Machine Brochure

    This equipment is used to remove shoots from the trunk or main arms of the vine, acting simultaneously as a 'natural weed killer', freeing the area between the rows of vines from infesting ...


    By RCM srl

  • Model SRV - Side Shoot Remover Unit Brochure

    The sucker remover unit SRV is used to remove new shoots along the stems of the vines. The axial rotation of the shaft allows the head to be used also to control weeds. This tool can be applied to any frame B1, B1SB, turning frame and B2. The whips available are three: round soft polymer ideal for young vineyards, square yellow / orange hard aggressive with the grass and  large strips very ...


    By Rinieri S.r.l.

  • ERO - Model 4000 - Shoot Binder Brochure

    Shoot Binder  With a capacity of 4000 staples, the roll-feed automatic stapler can bind more than one hectare of vines between refills. Standard equipment includes garn stop, clamping pincer and clearing device. It is suitable for both front and over-hood ...


    By ERO-Gerätebau GmbH

  • ERO - Model 250 - Shoot Binder Brochure

    Equipped with a stapler that takes sticks of 250 staples, the ERO Shoot Binder 250 is reasonably priced and easy to operate. It is suitable for both front and over-hood ...


    By ERO-Gerätebau GmbH

  • ERO - Model 500 - Shoot Binder Brochure

    The easy-to-use stick-feed automatic stapler takes sticks of 500 staples so that it can also be used effectively for long rows. For easy filling, the magazine can be withdrawn completely from the automatic stapler. Standard equipment of the ERO Shoot Binder 500 includes garn stop, clamping pincer and clearing device. The ERO Shoot Binder 500 is suitable for front mounting on all popular vineyard ...


    By ERO-Gerätebau GmbH

  • Kobold - Cane Puller Brochure

    In the vineyard, the KOBOLD vine puller helps you by pulling out the cut vines and placing them in the row or immediately chopping them. Prepare your vineyard for using the KOBOLD! Right from the first foliage cut, ensure that you have the correct cut and the correct height so that the KOBOLD can be used optimally at the end of the ...


    By Clemens GmbH & Co. KG

  • Model TTC - Shredder Brochure

    The shredder TTC is designed for 16Hp a 30Hp tractors (12Kw to 23Kw). Extremely reliable, functional, rapid in grass cutting and easy to mount, it is the ideal machine for cutting grasslands, vine shoots, orchards and shredding brushwood and untamed soils. Its compact design reduces significantly all contingent bumps making the shredder nimble and reactive, providing a fast and optimum ...


    By Bellon Mit

  • Model TF - Shredder Brochure

    The TF model shredder is fitted to the three-point lifton the tractor, wich can have either wheels or be a caterpillar version, and isactivated by the power takeoff with a cardan drive shaft. The machine is used to eliminate weeds, vineshoots anda small banches, offering the operator the chance to choose betweentraditional shredding or shredding beyond the standard area with respect to ...


    By RCM srl

  • Model CPS and CPL - Double Barrel Winter Trimming Machine Brochure

    Double barrel winter trimming machine for cutting the branches in cordon vineyards. Pre-pruner and remover vine canes CPS, suitable for  all varieties of vineyards, essential for cost containment of vineyard management.  To the operator is left only the finishing touch of occasional clearing of the wires as most of the canes are removed from the wires, therefore reducing the pruning ...


    By Rinieri S.r.l.

  • Model TTB - Shredder Brochure

    The shredder TTB is designed for 35 to 70 hp tractors (26 to 53 kw). Extremely reliable, functional, rapid in grass cutting and easy to mount, it is the ideal machine for cutting grasslands, vine shoots, orchards and shredding brushwood and untamed soils. It can be installed to the rear of a tractor with PTO at 540/1000/2000 rpm to be towed with a 3-point hitch Cat. I or II. Its compact design ...


    By Bellon Mit

  • VINESCOUT - Tractor Control Systems Brochure

    Computer supported tractor control systems are the future of agricultural technology and make an essential contribution to working more efficiently. The new tractor steering system, VINESCOUT, from Clemens can be adapted to all tractors with hydraulic ...


    By Clemens GmbH & Co. KG

  • GSG - Model AN 2 and N 2 - Self Operating Sprayer Brochure

    The GSG over-row fan sprayers are a new range in the field of plant protection. They are fitted with hydraulically driven cross-current fans. With the 2, 3 and 4-row machines, a new configuration of the fans and a recycling system mean that up to 40% less crop protection agent is used in the course of the ...


    By Clemens GmbH & Co. KG

  • Breaker Plough Brochure

    Breaker ploughs are equipped by own board hydraulic. Oil circulation system is created by a double pump which is attached to PTO shaft. Gear will be plugged in to PTO stub of tractor (profile Z6 - 1 3/8“). Machines shall be driven by number of revolution of maximum 540 r/min Without difficulty old plants can be taken out of the ground which is taken by means of spin roll catapulted out on ...


    By Clemens GmbH & Co. KG

  • Teractiv - Soil Cultivator Brochure

    The special kinematics of the mechanical NON-STOP overload protection work continuously and sustainably loosen the soil. Tools are pulled in quickly due to the special blade shape. Any organic matter can be reliably worked in, producing an intensely mixed soil. The width of the solid frame can be adjusted from 1,100 to 1,600 mm (extensions of up to 2,100 mm are available). The right- or left-side ...


    By Clemens GmbH & Co. KG

  • TERACTIV DUO - Soil Cultivator Brochure

    With the TERACTIV DUO, you have the option of cultivating either the entire row or just the area around the vine in a green row. To make this possible, the frame with its flexible tines lifts through at an angle of 75° and the roller folds under. This stabilises the frame when working in the area between vines, as it rests on the grass track. This allows it to move smoothly and maintains a ...


    By Clemens GmbH & Co. KG

  • Subsoilers - Model TLK 883 - Soil Cultivator Brochure

    The subsoilers from CLEMENS were developed specially to break up compacted areas powerfully and enduringly. The cutting action reactivates the roots so that they can finally start to grow properly again. The soil is optimally aerated and its ability to retain water is maximized. Plants can take up nutrients more efficiently again, remain healthy and deliver higher yield! Mechanization is becoming ...


    By Clemens GmbH & Co. KG

  • Model PR7 and PR9 - Soil Cultivator Brochure

    Narrow all-purpose plough with hydraulic width adjustment. It is particularly suitable for use in nurseries, in vineyards with narrow spacing between rows and for other row ...


    By Clemens GmbH & Co. KG

  • ERO - Model ELITE - Trimmer Brochure

    Seven different cutting lengths from 100 to 195 centimetres enable its use in widely differing vineyards. The Elite Comfort model includes the Comfort Controller with joystick operation, so that just a single-acting control valve and a pressure-free return line are required on the tractor. The ERO Elite trimmer is available in L-form or over-row, in both one and two-sided ...


    By ERO-Gerätebau GmbH

  • HEXAGON - Model 724 - Soil Cultivation Brochure

    The robust all-purpose machine for soil cultivation or as tool carrier.HEXAGON 724 as an equipment carrier with a Radius on both sides.Solid hexagonal profiled frame, hydraulically or mechanically adjusted. Optimum height guidance by crumbling roller with spindle adjustment. Extension frame for high passage. Compact design for attachment of a rotary harrow or tiller. Machine mount for the ...


    By Clemens GmbH & Co. KG

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you