Agroforestry Equipment For Forestry Available In Zimbabwe
-
Manufactured by Kawak Aviation Technologies, Inc.based in USA
The performance and dependability of the hydraulic system can dramatically improve the productivity of the aircraft for agricultural and forestry operations. High volume (10 to 20 GPA) spray applications can be flown at faster speeds and wider swath widths substantially increasing the revenue potential of the aircraft. This system is certified under FAR 27 and is eligible for use with the ...
-
Manufactured by Stronga Ltdbased in UNITED KINGDOM
The HL140 hook loader is resilient, compact and well proven across a wide range of industries including agriculture, energy, forestry, recycling and construction. HookLoada HL140 is suited to tractors from 80-140HP. Containers of 5500mm optimum length can be transported at high speed, increasing efficiency and productivity. With a highly reliable foldable tower, the HL140 hook loader has a very ...
-
Manufactured by Micron Groupbased in UNITED KINGDOM
Available in 2P and 25P models, the AccuDos is a professional spray applicator with the facility to 'dial-in' a pre-determined quantity of spray liquid for the accurate dispensing and delivery of a measured volume of spray liquid. A choice of flat fan or hollow cone spray nozzles, selected to deliver the appropriate droplet size range and spray pattern, is available to ensure spray is transferred ...
-
Manufactured by Wingtra AGbased in SWITZERLAND
The RedEdge-MX is a professional, rugged multispectral sensor for advanced aerial mapping applications like agriculture, forestry or environmental research. The industry standard multispectral sensor: The RedEdge-MX full-spectrum camera lets you capture distortion-free RGB, NDVI, and advanced vegetation index layers in a single flight. Together with high-precision PPK module, RedEdge-MX ...
-
Manufactured by Micron Groupbased in UNITED KINGDOM
Varidome is a range of shielded inter-row sprayers for eradicating weeds growing in between rows and wheeling areas. Varidome is suitable for use in oil seed rape, sugar beet, maize, onions, carrots, parsnips, leeks and many other crops including ornamentals, herbs and tree nurseries. Varidome design incorporates shielded heads which can be individually adjusted to allow operators to treat ...
-
Manufactured by Micron Groupbased in UNITED KINGDOM
The Herbi 4 is a hand held spinning disc sprayer for the Controlled Droplet Application (CDA) of herbicides. It can use CDA formulations or traditional water-based products at total spray volumes of only 10-30 litres/hectare. The consistently large spray droplets of around 250 micron minimise any risk of spray drift and fall in a precise 1.2m wide circular spray ...
-
Manufactured by Micron Groupbased in UNITED KINGDOM
ncorporating either traditional pressure nozzle (HiFlo models) or CDA spray system (CDA models), Spraydome shielded sprayers are ideal for treating weeds in situations where a complete chemical barrier is required. Spraydome's flexible plastic dome fully contains the spray which makes it highly suited for applications where chemical contact with the crop is not desired - for example, in ...
-
Manufactured by Casotti Irroratoribased in ITALY
DUPIGET PRECISION is a 12 V electrical sprayer with horizontal oscillating jets, suitable for weed-killing and herbicide treatment distribution.?It is considered to be the most versatile sprayer, as it offers the possibility of work only on the right or only on the left, and of adjusting the working width. It is recommended where it is impossible or simply impractical to use a classic boom. ...
-
Manufactured by Turolla - Danfoss Power Solutions S.r.l.based in ITALY
Available in three different frame sizes Turolla aluminum gear motors feature high strength extruded aluminum housings and aluminum rear cover and front flange for maximum strength and low weight. A broad variety of configurations are available with European or SAE flange options to meet widely varying machine requirements. Our motors are designed to achieve significant improvement in overall ...
-
Manufactured by Nøsted & ASbased in NORWAY
TRYGG U-Grip is a popular forestry chain. Standard triple diamond pattern on metric tyres gives good grip and protects the sides of the tyre. U-studs welded on top of the horizontal chain links reduce wear of links, ensure good grip and long product lifetime. Tightening rail is standard for 55 profile and lower and is available for all other dimensions as an option. A separate chain tightener is ...
-
Manufactured by Kawak Aviation Technologies, Inc.based in USA
Our Bell 206L Auxiliary Hydraulic System gives applicators an instant 30% boost in productivity over applicators using the alternative Honda systems. Spray applications can be flown at faster speeds and wider swath widths substantially increasing the revenue potential of the aircraft. The Bell 206L Auxiliary Hydraulic System incorporates a modular design that can be installed, maintained, or ...
-
Manufactured by Nøsted & ASbased in NORWAY
Two "V-shaped" studs on each grouser ensure traction and long service life. The pattern has a great self-cleaning ability in mud and snow, and the chain is stable in difficult conditions. Because of the chains superior stability, tightening rail is not required. Three side chain shortening points allow easy and simple adjustment during use. We recommend to use of our chain ...
-
Manufactured by Soil Sensors & Weather Detectors for Agriculture - JXCTbased in CHINA
The Portable Soil fertility sensor is suitable for detecting the content of nitrogen, phosphorus, and potassium in the soil, and judging the fertility of the soil. thereby facilitating the systematic evaluation of the soil condition. Can be buried in the soil for a long time, resistant to long-term electrolysis, corrosion resistance, vacuum potting, and completely waterproof. Portable Soil ...
-
Manufactured by Tube Clamps India Pvt. Ltd.based in INDIA
BRAND : TU-LOK, DESIGN: SAE J518 C / ISO 6162 / ISO 6164 / JIS B2291 , MATERIAL: CS, SS 304, SS 316, SS 316 TI, ALLOY STEEL, DUPLEX, SUPER DUPLEX, INCONEL, MONEL, HASTELLOY, SMO 254, 904 L, TITANIUM, WORKING PRESSURE : UPTO 210 BAR (3000 PSI) & 420 BAR (6000 PSI) & 700 BAR (10,000 PSI) CUSTOMISED, CODE : CODE 61 FLANGE (3000 PSI) & CODE 62 FLANGE (6000 PSI), SIZE RANGE : 3/8" (DN 10) ...
-
Manufactured by Ecomatikbased in GERMANY
The DC series dendrometers are used for high-precision and continuous measurement of changes in stem circumference. These devices are suitable for long-term use in outdoor conditions. Due to their extremely low power consumption, Ecomatik dendrometers are ideal for battery-powered solutions, e.g., in IoT ...
-
Manufactured by Zhejiang TOP Cloud-agri Technology Co, Ltd.based in CHINA
Product description: Plant nutrition analyzer, also known as crop nutrition diagnostic instrument, can measure four parameters (chlorophyll, nitrogen content,leaf temperature and leaf humidity)at the same time.In order to solve the plant's true nitro demand and understand the extent of soil nitro deficiency or excessive application of nitrogen fertilizer. Through the guidance of TYS-4N plant ...
-
Manufactured by Turolla - Danfoss Power Solutions S.r.l.based in ITALY
Available in three different frame sizes Turolla aluminum gear motors feature high strength extruded aluminum housings and aluminum rear cover and front flange for maximum strength and low weight. A broad variety of configurations are available with European or SAE flange options to meet widely varying machine requirements. Our motors are designed to achieve significant improvement in overall ...
-
Manufactured by Nøsted & ASbased in NORWAY
IGLAND 280 features a 7 ton load capacity on trailer and is delivered fully equipped, with crane, rotator and grapple. The crane is detachable and can be mounted on the 3-point hitch linkage of the tractor and is equipped with hydraulic fold-down stabilizer legs. The bogie is equipped with tire dimensions: 400 / 60 - 15.5 / 14 layer, 2 log retaining posts, one fixed and one adjustable. Boogie ...
-
Manufactured by Stronga Ltdbased in UNITED KINGDOM
The HL180 model is the most popular entry point into the multi-modal world of HookLoada. With a 30% bigger payload than HL014, the 18 tonne Stronga HookLoada is the perfect solution for medium-size contractors who need extra capacity for only a small extra investment. Stronga’s classic 18 tonne HookLoada delivers reliability and performance like no other hook lift system available; leading ...
-
Manufactured by Moty GmbHbased in AUSTRIA
The Moty KE 3000 mechanic drive pumpkin seed harvester is thoroughly impressive in functionality, form and design. Years of experience of producing pumpkin seed harvesters have gone into them. The mechanically driven harvester, equipped with a large screening drum, is designed to handle high ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you