Forestry Manufacturers, Suppliers & Companies Near Libya
-
Manufacturerbased in Acconia di Curinga (CZ), ITALY
Sicma srl (Società Italiana Costruzione Macchine Agricole) was founded in 1991, as a logical consequence of the experience of its founder in the field of the mechanical harvesting of olives. Sicma technology was then successfully tested and adopted ...
Sicma - Model TF80 - Harvester for olives, nuts, cherries, plums with trunk shaker
TF80 is the frontal telescopic single arm mounted on tractors (wheeled or tracked) for the harvest of both young and centuries-old trees. The TF80 is coupled to the tractor by a double reinforced frame fixed on the drive unit chassis. Equipped with ...
CONTACT SUPPLIER -
ManufacturerDistributor in Cairo, EGYPT
CID Bio-Science, Inc., has been designing instruments for agricultural and environmental research for over 25 years. Our company was established in 1989 with the introduction of our state-of-the-art handheld photosynthesis system. Since then we have ...
Made in the Shade- How 11 Research Studies Cleverly Use Canopy Analysis to Measure Crop & Forest Health - Webinar
Special guest researchers Brendon Anthony of Colorado State University and Derek Godwin of Oregon State University, along with our application scientists Eric Munoz-Garcia and Galen George review 11 studies that have used canopy analysis for ...
CONTACT SUPPLIER -
ManufacturerDistributor in New Maadi, EGYPT
The Eggersmann Philosophy - As an active contributor to the recycling industry, we support the global fight for the environment and climate protection - with our systems and special machines as well as with many years of experience and ...
BRT HARTNER - Model D Series - Feed and Metering Hopper
D Feed and Metering Hoppers are designed for continous and even feeding of most different materials and are equipped with an electrical volume flow regulation and an MF Moving Floor ...
CONTACT SUPPLIER -
ManufacturerDistributor in Ano Liosia, GREECE
PTH products are characterised by a high degree of reliability, patented high-performance tools, replaceable interior wearing parts and highest quality standards for all components! They assist you in mastering the most difficult tasks quickly, ...
-
ManufacturerDistributor in , GREECE
Mechanical waste processing. Baling presses. Barrel presses. Film presses. Paper presses. Refuse presses. Waste disposal plants. Waste paper presses. Waste technology. DIXI press systems for the waste reduction of recycling material (cardboard & ...
Humus - Model HKP Series - Rotary Mowers
The HKP rotary mower is a cost-efficient variant for orchards. It is used when the tree strip is sprayed with chemicals or is kept open with a cultivator. In addition, it has optimally proven itself in general green area maintenance. The linear ...
CONTACT SUPPLIER -
ManufacturerDistributor in Kavalari-Lagada, GREECE
We have manufactured firewood processors for more than half a century, and the entire manufacturing chain, from the design to final assembly, is in our own hands. Our product development team travels the world in search of innovations and our ...
Palax - Model C 1000 - Firewood Processors
The Palax C1000 is a hard worker´s true friend. The Palax C1000 is a robust firewood processor for tough professional use, equipped with several significant innovations. As a result of added chopping speed and power, it is one of the most ...
CONTACT SUPPLIER -
ManufacturerDistributor in Athens, GREECE
Komptech is a leading international technology supplier of machinery and systems for the mechanical and mechanical-biological treatment of solid waste and for the treatment of biomass as a renewable energy source. As a technology leader, the ...
-
ManufacturerDistributor in , GREECE
Our goal at Dynamax is to maintain our position and recognition as a global leader in the production and integration of plant-environmental monitoring instrumentation. We are constantly building on that reputation by supplying only the highest grade ...
Dynagage - Model Flow32-1K - Sap Flow System and Dynagage Sensors
The Dynagage Flow32-1K Sap Flow system and Dynagage sensors have been servicing research plant scientists throughout the world for over 10 years. The Flow32-1K software makes working with Flow32-1K sap flow system easier than ever before with ...
CONTACT SUPPLIER -
Manufacturerbased in Ostuni (Br), ITALY
Since 1975 we have been at the service of agriculture designing and producing agricultural machines. Our more succesful product has been the aerial platforms for tractors that we have been producing since 1998. In 2012 we started producing new ...
D`Amico - Model Monoelevatore H6 - Lifting Unit
Monoelevatore h6 is a lifting unit with a self leveling basket mounted on fixed arm that can be exclusively controlled by the operator from inside the basket. The lift is attached to the 3-point linkage of a tractor that provides both mechanical ...
CONTACT SUPPLIER -
Manufacturerbased in Altamura (Ba), ITALY
Agri World srl is an engineering company operating in the design and construction of industrial machines, construction, agricultural, and forestry. Making use of technical and skilled workers, resulting from thirty years experience, Agri World srl ...
Forest Brush Cutter
The Forestry Brush Cutter is a machine suitable for job of various kinds: underwood cuttings, creation of paths and traks for prompt intervention and maintenance of the woods, preparation and restoration of new wood-land, creation of filling station ...
CONTACT SUPPLIER -
Manufacturerbased in Altamura (BA), ITALY
Crushing Tech is a dynamic company specialized in designing and producing machines technologically advanced in the reclaiming of stony and rocky lands and in the crushing of stones coming from excavations and demolitions. Its known and consolidated ...
CrushingTech - Model FPC - Stump Cutter
The stump cutter FPC is a forestry mulcher able to chop stumps, roots, tree trunks both on the surface and in ...
CONTACT SUPPLIER -
Consulting firmbased in Thermi, PO BOX 60824, GREECE
kartECO provides high Quality services in Environmental consulting, Energy Consulting, Natural Resourse Management (eg. Forestry), IT tools for Env. applications. WebGIS-Remote ...
-
Manufacturerbased in Thessaloniki, GREECE
Bio-based Energy Technologies P.C. (BIO2CHP) is a university spin-off company, established in 2017, with the main purpose of bringing to the market a technology which enables the use of raw residual biomass for the small-scale & on-site energy ...
-
ManufacturerDistributor in Thessaloniki, GREECE
The headquarters of SERRA is located in southern Germany, surrounded by forests on the edge of the Alps. This is where almost 40 employees are providing expert customer service under the leadership of Johann Fritz. Numerous customers around the ...
Alpina - Model KE 90 / KB 90 - Professional Sawmill
The optimum entry model for wide saw blade technology. A sawmill with convincing equipment possibilities and easy operation because of its standard positioning control. Also available with a manual log handling system for a lower price. Therewith ...
CONTACT SUPPLIER -
Distributorbased in Borgo San Donato (LT), ITALY
Our Company, located since 1992 in the Pontine Planes south of Rome, has started its activity with the production of flowering pot plants and has kept on developing up until today offering now a wide range of plants. In order to match our Italian ...
-
ManufacturerOffice in Latina (LT), ITALY
Dümmen Orange represents a legacy of floricultural excellence more than a century in the making, providing the largest selection of superior flowers and plants on earth. By uniting the world’s top breeders under one distinctive brand, we blend ...
-
Manufacturerbased in Melara (RO), ITALY
Pofer SRL is an Italian screw conveyors manufacturer with over 30 years of experience in the design and production of screw conveyors for agriculture, industry and biomasses. We provide a wide range of augers, designed for the transport and mixing ...
-
Manufacturerbased in Zanè, ITALY
Blue Bird Industries was established in December 1978. The activity of the factory was the production of brushcutters and trimmers with 2-stroke internal combustion engines of its own design. The company’s first two engines featured 31 and 38 cm3 ...
Blue Bird - Model DOMINO Series - Wheeled Brushcutters
The Blue Bird wheeled brushcutters are particularly suited to deal with large areas, with very high grass and in presence of underbrush. Designed for mowing of hills and sloppy areas, can be an effective alternative to the traditional brushcutters ...
CONTACT SUPPLIER -
Manufacturerbased in Minerbio (BO), ITALY
The LOSI VITTORIO was founded in 1963 as single enterprise in Bologna, Via Musolesi, and specialised in constructing seats and spare knives for motor-harvesters and tuber-cutters. In the same decade they began the production of cutter bars ...
-
Manufacturerbased in Cles (TN), ITALY
Valentini is a family-run enterprise specialized in the development and production of mobile cable-cranes for the transport of wood and other materials. Our enterprise is based in the North of Italy, in the alpine Region Trentino-Alto Adige, which ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you