Foresters Equipment For Forestry Near Australasia
-
Manufactured by CID Bio-Science, Inc.based in USA
Miniaturized, non-destructive root imaging for plant and crop research. Reimagining root researchThe CID Bio-Science Narrow Gauge Root Imager makes high-resolution observation of root growth and behavior simple and non-destructive.Crop optimization: Measure the impact of various treatments on root growth over time, giving a holistic view of plant health. Forest productivity & sustainability: ...
-
Manufactured by CID Bio-Science, Inc.based in USA
Portable, non-destructive root imaging for plant and crop research. Root research the right wayThe CID Bio-Science In-Situ Root Imager makes high-resolution observation of root growth and behavior simple and non-destructive. Crop optimization: Measure the impact of various treatments on root growth over time, giving a holistic view of plant health. Forest productivity & sustainability: ...
-
Manufactured by CID Bio-Science, Inc.based in USA
Your data through a new lens. The CID Bio-Science Plant Canopy Imager makes data collection a breeze, allowing you to focus on the metrics that matter. Crop optimization: Measure vegetative spectral response, estimate plant nutrition, water requirements, and plant stress to enhance crop yields. Forest productivity: LAI, PAR and sunflecks inform silviculture, forest restoration, and the ...
-
Manufactured by CID Bio-Science, Inc.based in USA
Leaf spectroscopy for rapid non-destructive plant stress measurement. Discover modern leaf spectroscopy. The SpectraVue Leaf Spectrometer measures transmission, absorption, and reflection, along with many other plant stress and pigment indicators using built-in indices. Crop Optimization: Measure the effects of environmental variables on nutrient and pigment quantification and use chemometric ...
-
Manufactured by METER Group, Inc.based in USA
Low cost, weatherproof radiometer: The Spectral Reflectance Sensor (SRS) is a matchbox-sized, multiband radiometer that can be mounted on a fence post, tripod, or meteorological tower. It’s inexpensive enough to deploy multiple sensors simultaneously. And it’s rugged enough to leave in the field for an entire growing season, or ...
-
Manufactured by METER Group, Inc.based in USA
Measuring canopy density can be problematic: There are several methods to measure how much light is intercepted by a canopy in order to determine if water loss is from evaporation or transpiration. There’s the hard way. There’s the expensive way. And then there’s the smart way: the ...
-
Manufactured by HOMAN Quality Equipmentbased in AUSTRALIA
The Homan Plough is a giant, single tyne plough for pulling by large bulldozers. It can plough standing scrub and forest to 12 metres high and plant the land down to pasture in just one pass. Several million acres of rough wasted Qld country has now been converted into highly productive pasture land using Homan ...
-
Distributed by Spraygrass Landscapes Australia Pty Ltd.based in AUSTRALIA
Spraygrass Landscapes pioneered the commercial use of hydromulching. Hydromulching is a one-step process where seed fertiliser and mulch and a binder/tackifier are combined together in water. The resulting slurry is sprayed onto the soil surface providing a wood fibre interlocking mat that retains moisture for seed ...
-
Manufactured by Hemisphere GNSS, Incbased in USA
The IronView CW400 is Hemisphere GNSS’ next- generation professional grade GNSS data collector. The rugged handheld includes a high-sensitivity GNSS antenna and performs well in challenging environments, such as forests and urban ...
-
Manufactured by Agrifarmbased in AUSTRALIA
The AHM series is a heavy-duty mulcher best suited to typical farming applications such ...
-
Manufactured by SERRA Maschinenbau GmbHbased in GERMANY
Mini sawmill for logs up to 50 cm in diameter. Less than € 5,000 for a sawmill? That’s right! For anyone using wood saws only occasionally or on a smaller scale, this is a win-win. Whether farmers, foresters, hunters or carpenters: it is used successfully for a vast variety of applications. One important aspect considered in the design of this band sawmill was ease-of-use as well as ...
-
Manufactured by Farmi Forest Corporationbased in FINLAND
FARMI 4067-90, the economical multi-purpose combination is most suitable for the movement of timber from thinnings to early clear fell. It is also well suited for transporting different materials on work sites/ agricultural ...
-
Manufactured by Farmi Forest Corporationbased in FINLAND
FARMI 2740-70 is the smallest Forest Trailer Combination from Farmi Forest. It is an excellent choice for lighter forestry. It is at its best with small tractors at wood transportation from thinnings and at energy wood transportation. With this Combination, you can move plenty of wood easily to roadside. The FARMI 70 Forest Trailer has a strong Single Beam Frame with Movable Bolsters and it is ...
-
Manufactured by Ecodynamicsbased in AUSTRALIA
Ideal for contemporary garden designs, our Mossrock Coloured Mulch is available in a variety of shades and sizes. Available in a variety of colours and two different sizes, Mossrock Coloured Mulches are ideally suited to a modern landscaping aesthetic. The preferred choice of Landscape Architects, Mossrock Coloured Mulches enhance the visual effects of a landscape by highlighting and contrasting ...
-
Manufactured by Caron S.r.lbased in ITALY
The Series 100 is the smallest model of Caron range. Thanks to the lightweight and small size, it is extremely agile and handy, ideal for private users. The permanent 4-wheel drive and the double hydraulic circuit braking system on all 4 wheels guarantee safety and stability on every ground. The water cooled Kohler engine (3 cyl. / 1649cc) has 25 hp with a 100 Nm torque and it is approved ...
-
Manufactured by Caron S.r.lbased in ITALY
The 300 and 600 Series are in the “middle” of the AR/ST Caron range. Designed for those operators demanding the right balance between dimensions and loading capacity, necessary to work in very narrow places without giving up a payload of more than 3 tons. Total approved weight of 5000 kg (3500 kg for the series 300) and the highest loading capacity of the category: up to 3300 kg. The ...
-
Manufactured by SP Maskiner ABbased in SWEDEN
The SP 591 LX G3 is purpose built for harvesting and debarking of the most difficult species of plantation grown eucalyptus and acacia. It is an extremely strong and tough harvester head, designed according to the LX principle for maximum reliability and productivity even under the toughest conditions. The uncompromised LX design is to be found all throughout the harvester head, from large ...
-
Manufactured by SP Maskiner ABbased in SWEDEN
The SP 761 LF is a compact, heavy duty and high performance harvester head. It is designed according to SP´s Low Friction principle for minimum friction and maximum productivity. The SP 761 LF is suited for working on both large wheel based harvesters as well as tracked harvesters and excavator ...
-
Manufactured by SP Maskiner ABbased in SWEDEN
The SP 461 LF is a very fast, nimble high performance harvester head. It is designed according to SP´s Low Friction principle for minimum friction and maximum productivity. The SP 461 LF is perfectly suited to work on midsize thinning carriers with long reach as well as smaller in stand thinning carriers. Fast feeding in combination with low weight and very compact measurements ensures ...
-
Manufactured by SP Maskiner ABbased in SWEDEN
The SP 561 LF is a high-performance all-round harvester head. It is designed according to the LF principle for maximum productivity. The SP 561 LF is specifically designed for varied jobs and offers very good characteristics all the way from first thinning to medium final cut. The compact measurements in combination with a perfect delimbing down to 30mm make sure that the first thinning can be ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you