Only show results available in Virginia? Ok

Foresters equipment for Forestry

  • PALMS - Model 3.52 - Forest Crane

    Noole tõsteulatus, m: 5,2. Lifting torque, gross kNm: 37. Lifting capacity at 4 m w/o grapple and rotator, kg: 765. Lifting capacity at full reach, without grapple and rotator, kg: 580. Slewing torque, kNm: 12. Slewing angle, °: 370. Slewing cylinders, pcs: 4. Working pressure, bar: 190. Crane's weight without support legs and valve ...

    By Palmse Mehaanikakoda LLC based in Lääne-Virumaa, ESTONIA. from Forest Cranes Product line

  • PALMS - Model 9S - Forest Trailer

    Gross weight: 12000. Curb weight: 1375. Total length, mm: 6040. Total width with standard wheels, mm: 2150. Standard wheels: 400/60-15,5. Load area, m²: 2,1. Length of loading area: 3900. Chassis, mm: 200x200. 4 WD (roller drive between wheels) option. 2 WD (inner drum drive) option. Hydraulic brakes. Pneumatic brakes. Drawbar steering ...

    By Palmse Mehaanikakoda LLC based in Lääne-Virumaa, ESTONIA. from Forest Trailers Product line

  • PALMS - Model 2.54 - Forest Crane

    Noole tõsteulatus, m: 5,4. Lifting torque, gross kNm: 26. Lifting capacity at 4 m w/o grapple and rotator, kg: 530. Lifting capacity at full reach, without grapple and rotator, kg: 370. Slewing cylinders, pcs: 4. Slewing torque, kNm: 6,5. Slewing angle, °: 370. Crane's weight without support legs and valve block, kg: 400. FD type (flap ...

    By Palmse Mehaanikakoda LLC based in Lääne-Virumaa, ESTONIA. from Forest Cranes Product line

  • Komatsu Forest - Model S92 - Forest Harvesting Head

    A new allround head for maximum high productivity and dependability, even in the most difficult forests. These are undoubtedly the clearest benefits of our new two-weel drive head.

    By Komatsu Forest based in Umeå, SWEDEN. from Heads Product line

  • GreenShredder - Spare Chipper Knife for Forester

    Spare Chipper Knife for all Forester Models. Two required for all Forester models. The Shredder/Chipper works best when the knives are sharp so it is usefull to have one or two spare so that they can be chaneged when most needed.Complete with bolts and washers. When ordering multiples contact the office for cheaper postage.

    By GreenShredder Company Limited based in Birmingham, UNITED KINGDOM. from Spares and Accessories Product line

  • Screw Augers

    Customer's auger is buried under hog fuel pile 24/7. Even after experimenting with special alloys and spray-on products, the mill was only getting eight months life out of the auger. Diversified Plastics applied its patented flighting and main beam cover system at a fraction of the cost of a new unit. This improved screw ran a full two years (24 ...

    By Diversified Plastics, Inc. based in Missoula, MONTANA (USA). from Featured Applications Product line

  • Forest Master - Bulk Log Stand 2

    The Forest Master Bulk Log Stand is capable of safely securing multiple logs for the user to chainsaw, the logs are held in place by 2 chains which automatically prevent the logs from moving during cutting. The main advantage of the design is that when the user is cutting the logs there is nothing directly below that can be caught by the chainsaw ...

    By Forest Master Limited based in Newcastle Upon Tyne, UNITED KINGDOM.

  • Maximise Forest Yield Bio Grapple

    The Bio model has been specifically designed for quick, easy handling of slash and waste material, parts of trees and other material that is to be chipped for BioFuel, either directly into chippers during felling, or later from a stockpile. The grapple uses the same basic components as the Standard model, but has reinforced boom tubes and twice ...

    By Hassela Skogsprodukter AB (HSP) based in Hudiksvall, SWEDEN.

  • Biotassu + - Grapple Tilt

    Biotassu +, controlling Biotassu S35/S 50 grapple tilt is much easier. Biotassu + may be adapted to many other applications. Due to its adapter, it can be easily fixed to the rotator’s head. Biotassu’s basic machine may be, for example, a forest tractor or an agriculture loader. The device runs with the hydraulic system of the basic ...

    By Sit Right AB based in NÅS, SWEDEN.

  • Konrad Highlander - High-Performance Harvester for Middle and Strong Sized Timber

    A Quantum Step in Mobility and Flexibility. The new innovation Highlander is a high-performance harvester for middle and strong sized timber. In normal harvester terrain, the HIGHLANDER can move with special maneuverability. In steep and extremely diffi cult terrain, the machine reaches an enourmous terrain flexibility due to the syncronised step ...

    By Konrad Forsttechnik GmbH based in Preitenegg, AUSTRIA.

  • Forest Fire Torch

    Forest Fire Torch For setting backfires or prescribed burns. Projects a 4” flame. Burns for ten minutes minimum. 14-1/4”L x 7/8” diameter with tin ferrule for attaching to a stick. Self-contained friction cap provides instant ignition. Complies with USFS Specification 360A. Waterproof coating. Case of 72.

    By Forestry Suppliers, Inc. based in Jackson, MISSISSIPPI (USA).

  • Sampo-Rosenlew - Model 1066 - Harvesters

    The high-performance Sampo-Rosenlew 1066 is not only nimble, but also a strong and efficient log handler. This semi-heavy duty harvester is designed for thinning, but it can also handle final cutting with ease. By increasing the wheel spec, a three-metre width can be achieved, and the service weight can be increased from 13 tonnes up to 16 tonnes. ...

    By Sampo Rosenlew Ltd based in PORI, FINLAND. from Forest Machines Product line

  • Coated Label

    International Paper's Coated Label paper products are ideal for delivering exceptional converting performance and outstanding print quality in a variety of end uses. IP C1S papers are available in two different brightnesses which allows for balancing aesthetics and economics in a wide range of applications. IP C1S and C2S papers are designed for ...

    By International Paper based in Memphis, TENNESSEE (USA). from Coated Specialty Grades Product line

  • Indexator - Model GV Series - Rotators

    Indexator GV-rotators are suitable for forestry machines, trucks and industrial cranes.  Oil is conducted to the rotator for turning function. Indexator manufactures a very wide product range of rotators, offering different rotators for light and heavier work.  Capacity is from 3 to 16 tons. There are several models for saw bar or axle ...

    By Metsätyö Ltd based in JYVÄSKYLÄ, FINLAND. from Forest - Rotators, Swing Dampers and Links Product line

  • PORTON - Model UF-6 - Tractor Mulcher

    The tractor mulcher UF-6 Porton is specially designed to shred all types of crops, grass, low scrub and branches of up to 12cm in diameter, and for scrubland clearance. Rear hydraulic hood. This model is ideal for the most demanding farmers with large acreages, as its 400mm diameter rotor and six rows of hammers achieves a very professional result ...

    By Picursa based in Tauste, SPAIN. from Agricultural Mulchers and Mowers- Semi Forest Mulcher Product line

  • Iggesund Forest - Model R1 and R2 - Chain Saw Bars

    We provide chain saw bars for the most common brands like Stihl, Husqvarna, Jonsered, Dolmar, Partner etc. We are proud of our chain saw bars. Forestry workers, forest owners, house owners, carpenters and others often need a reliable chain saw bar. That is why we have developed our chain saw bars and chain saw chains with focus on the work they ...

    By Iggesund Forest AB based in Nordmaling, SWEDEN. from Bars Product line

  • Model A3FFC - 24 - Forest Forwarder Carrier Trailer

    The MAC Forest Forwarder Carrier trailer was designed and manufactured specifically for the transportation of cumbersome forestry forwarder machines and other types of heavy plant.  The trailer is designed with practicality in mind and boasts an extraordinary low ground pressure for easy loading and unloading of machinery. The trailers ...

    By McCauley Trailers Ltd based in Toomebridge, NORTHERN IRELAND. from Agricultural Product line

  • Iggesund Forest - Model EW and EEW - Harvester Bar

    EW (Extra Wide) and EEW (Extra Extra Wide) are solid harvester bars with 10 mm tail slot. The bars are designed for energy and multi-tree harvesting heads. Its unique shape prevents the chain from jumping.

    By Iggesund Forest AB based in Nordmaling, SWEDEN. from Bars Product line

  • Sampo Rosenlew - Model HR46 - Forest Harvesters

    The HR46 is the new workhorse for first thinning. Even more powerful than its predecessor 1046pro, the harvester now has a larger, 135cc pump, which facilitates operation at an engine speed reduced by a third. This change improves performance and reduces consumption, which translates to increased profitability of thinning operations for the owner.

    By Farmer 2000 based in STARA ZAGORA, BULGARIA.

  • Kesla - Model 671H - 685H - Harvester Cranes

    KESLA harvester cranes are known for their excellent working geometry and ample net lifting capacity throughout the entire path of travel working range. These properties increase the productivity of harvesting in all conditions. The economy of the operations is ensured by the durability and reliability of the cranes, which ensure a high ...

    By KESLA OYJ based in Joensuu, FINLAND. from Forest Machine Cranes Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you