Forestry Crane (Forestry Equipment) Equipment
-
Manufactured by Farmi Forest Corporationbased in FINLAND
The FARMI 4670 crane is the optimum choice for the transport of thinning material and wood used for energy generation as well as for various agricultural and forestry lifting tasks. A good reach and slewing torque, 760 kg lifting capacity at a reach of 4 m and wide-angle joint – these features enable the crane to be used e.g. for ...
-
Manufactured by Daniele & Giraudo s.n.c.based in ITALY
The forestry cranes K series are designed and manufactured to meet stringent quality standards, using the best anti-strength steel, with high quality pins mounted on anti-wear sleeves to give over time, reliability and robustness in the toughest conditions of ...
-
Manufactured by MP International S.r.lbased in ITALY
Hydraulic lateral side for cellar actionable from the ...
-
Manufactured by Cranab ABbased in SWEDEN
The Cranab HC185 - optimised forestry technology through and through. The parallel harvester crane is a strong tool for single action harvesters in final felling and tough thinning, and never compromises on performance! The slewing, lifting and telescopic functions are powerful and well-dimensioned. The crane also boasts a geometry that ...
-
Manufactured by Vitli Krpan, , D.O.O.based in SLOVENIA
Load Capacity 8.000 kg. Loading Length 3.700/4.300 mm. Weight 1355 ...
-
Manufactured by As Fors MWbased in ESTONIA
FARMA proudly presents our new design-protected series of lumber trailers under the concept FARMA Generation 2. Trailers based on user experience. This is a completely new and innovative design, mainly thanks to the octagonal, bent, centre profile, which gives a more durable design that also means the central section glides more easily over high stumps and rocks. In its basic version, the trailer ...
-
Manufactured by As Fors MWbased in ESTONIA
FARMA is proud to present our new professional lumber trailer series under the concept FARMA Generation 2. We start up by introducing the two trailer sizes T-10 and T-12. They have an entirely new and innovative design to satisfy its ...
-
Manufactured by Vitli Krpan, , D.O.O.based in SLOVENIA
Load Capacity 10.000 kg. Loading Length 3.955/4.735 mm. Weight 1660 ...
-
Manufactured by Farmi Forest Corporationbased in FINLAND
This economical loader is designed to meet the demands of the forestry and agriculture industry. Loader is very well suited for the timber loading from thinnings to early clear fell and as multipurpose tool for many kind of lifting ...
-
Manufactured by Rima Machinery Co., Ltd.based in CHINA
Mix Reach 3.4 m. Telescopic Boom No. Telescopic Boom Length No. Lifting Capacity 250 kg. Slewing Angle (degrees) 360>. Slewing Cylinder 2pcs. Grip area 0.08 m*. Max Grapple open 710mm. Rotator lton. Control Valves 7 sets. System Pressure 16 Mpa. 3-Point Linkage Cat-1&2. Tractor 25-35HP. Weight 350 ...
-
Manufactured by Industrias Guerra S.A.based in SPAIN
provides strong security in areas with steep slopes and maneuverability in the worst situations.. The R10 and R11 series have the same hydraulic traction equipment, and only the chassis varies: R10 is shorter and has a box with tilt and R11 does not have a tilt and can go with a ...
-
Manufactured by Industrias Guerra S.A.based in SPAIN
provides strong security in areas with steep slopes and maneuverability in the worst situations.. The R10 and R11 series have the same hydraulic traction equipment, and only the chassis varies: R10 is shorter and has a box with tilt and R11 does not have a tilt and can go with a ...
-
Manufactured by CGA Ricambibased in ITALY
The POLY series forestry grapple range includes 3 versions; they are particularly suitable for handling cut wood and twigs and can be mounted on forestry cranes, excavators up to 8 tons, telescopic handlers, front loaders and so on. An important feature is given by the hydraulic system which is placed inside the body to ...
-
Manufactured by Inderfor Forest Machinerybased in FINLAND
The KESLA 305 and 316 series cranes are indicated for heavy loads and in constantly demanding conditions. It can be installed on the rear axle of the tractor or on the connecting bar of a forestry trailer. It can also be used in conjunction with forestry machinery or a chipper. The operating geometry of the KESLA 305 and 316 series ...
-
Manufactured by Wikar Oy Abbased in FINLAND
Models 100 H, 120 H, 100 4WD and 4WD are two-trailer trailers. This helped to keep the frame structure low as well as the low center of gravity of the trailer, even during full load. The robust construction of the trailer allows for the installation of even higher models of forestry cranes. Trailers can be tailored to your individual needs. ...
-
Manufactured by BMF (OÜ Lisako)based in ESTONIA
Wide angle forest crane with 5,4m total reach. Forest crane with wide angle and 5,4m total reach. Our strong forest crane has a very high-quality workmanship and it comes with a three-point connection. It fits to different BMF Forest trailers and is a reliable partner for your forestry. Choose from a large number of ...
-
Manufactured by Rabaudbased in FRANCE
Forestry trailer with a 11 T GVW and 25 km/h road ...
-
Manufactured by Hnos. Toimil García S.Lbased in SPAIN
Hydraulic Extension 1155 Height on Transporter: 2430 Width: 1900 Angle of swing: 400 Moment of Swing: 10/14 Recommended Pump: Volumen: 50/70 Pressure: 19 Power: 22/30 Moment of Swing: 5.00 Max Horizontal Reach: 5960 Min Crane Weight: 2240 Max Crane Weight: ...
-
Manufactured by Daniele & Giraudo s.n.c.based in ITALY
The forest loader DG-F series are designed and manufactured to meet stringent quality standards, using the best anti-strength steel, with high quality pins mounted on wear sleeves to give over time, reliability and robustness in the toughest conditions of ...
-
Manufactured by Caron S.r.lbased in ITALY
The Series 100 is the smallest model of Caron range. Thanks to the lightweight and small size, it is extremely agile and handy, ideal for private users. The permanent 4-wheel drive and the double hydraulic circuit braking system on all 4 wheels guarantee safety and stability on every ground. The water cooled Kohler engine (3 cyl. / 1649cc) has 25 hp with a 100 Nm torque and it is approved ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you