Forestry Harvesting Equipment For Forestry In Europe
-
PremiumManufactured by Feucht Obsttechnik GmbHbased in GERMANY
For low-trunk orchards and smaller trees up to 30 cm in trunk diameter. The FSI plantation shaker is suitable, for example, for harvesting smaller trees such as cherries, plums, yellow plums, apples or nuts or low-trunk orchards. The trunk shaker works with a collet clamp. Clamping the hydraulic clamps on the shaker head makes it much easier to attach the shaker to the tree. This results in ...
-
Manufactured by Farmikko Oybased in FINLAND
200-165-HT2P Faster model = smaller cutting cylinder (diameter 63mm) and it is equipped with pressure booster = cutting force 10,6tn / ...
-
Manufactured by Industrial Plankton Inc.based in CANADA
Most rotifers are still produced in large low-density batches, which are a common source of vibrio and other pathogens. Poor quality live feed causes mortality and lost revenue for a hatchery, but the true cost impacts the entire value chain. Animals that survive fighting off early infections often have worse feed conversion ratios and lower growth rates throughout their life, resulting in less ...
-
Manufactured by Elektronikbased in SERBIA
This machine can be used for harvesting, cleaning and packing stone fruits (cherries, plums, olives …) It is made as independent hydraulic aggregate which must be assembled on tractor without cabinet. Two parts of collector form “V” shape around the tree and allow ease harvest without lifting the ...
-
Manufactured by Solano Horizonte S.L.based in SPAIN
Hydraulic central hitched on the rear 3 points of the tractor with fast coupling plugs and counter-weight. System of multiple vibration with three speeds. In-cab electrical control box. Elevation movement of pincers. 35º transversal orientation movement of pincers. Simultaneous opening movements of both umbrella and ...
-
Manufactured by Riuttolehto Oybased in FINLAND
Tapio 400 harvesting head standard equipment: Measuring device Logger, 1 pc. Including: 1 x connection module to the cabin. 1 x grapple module. 1 x display of measuring device. 1 x rack for display. Length measuring wheel, 1 pc. Saw bar .404-2.0 18”, 1+3 pcs. Saw chain .404-2.0 65, 1+3 pcs. Push button box right, 1 pc. Push button box left, 1 pc. Push button box holder, 2 pcs. Pre-selection ...
-
Manufactured by Weremczuk FMR Sp. z o.o.based in POLAND
MAJA AUTOMATIC LK tree shaker is the machine which enables fast and efficient harvesting of fruit from trees. The harvester can be use for harvest industrial apples, cherries, plums, olives, almonds and other stone fruits. Tree shaker is equipped with automatic folding and unfolding arched screen. This solution makes that only 2 people are required to operate the machine. It reduces production ...
-
Manufactured by Rottne Industri ABbased in SWEDEN
Rottne H11D in 6 and 8-wheel designs, is an articulated-steered harvester for thinning and final felling. Powerful engine, hydrostatic transmission and articulated frame joint in the centre give Rottne H11D excellent off-road performance and precise ...
-
Manufactured by Eco Log Sweden ABbased in SWEDEN
The Eco Log 561 LF is a high-production all-round harvester head, designed to handle the various tasks within forestry efficiently – everything from thinning low-grade timber to basic final felling. The low-friction concept (LF) ensures maximum productivity, durability and profitability thanks to the fact that it minimizes friction, wear, and maintenance ...
-
Manufactured by Turolla - Danfoss Power Solutions S.r.l.based in ITALY
Similar to the ezeFlow, ezeHelp is a lower flow and less complex electrohydraulic system. Units consist of a 12/24V DC motor ranging from 350W – 2,2 kW coupled to a group 1 SNP1 series Turolla gear pump ranging from 1,2 cc/rev to 12 cc/rev. Emergency hydraulic power for steering in case of main steering failure. Park brake release and service brake engagement. Primary hydraulic power for ...
-
Manufactured by Log Max ABbased in SWEDEN
The Log Max 4000T, our latest thinning head has impressive pulling force and high speed feeding. This head has an entirely new frame construction where the saw box has been moved backwards and outwards, the higher part of the frame inched forward reducing friction and clogging in the measuring wheel. The new hydraulics layout greatly improves power and feeding speed making this 833 kg* harvesting ...
-
Manufactured by Solano Horizonte S.L.based in SPAIN
Hitched on the rear 3 points of the tractor, run through PTO shaft. Hydraulic hoses to run the unloading of almonds and regulation of the third point are connected directly to the tractor. Hydraulic central integrated on the harvester. In-cab electrical control box. Simultaneous opening movements of both umbrella and pincers. Independant regulation for peeler. Independant regulation for inverted ...
-
Manufactured by John Deerebased in USA
Since its introduction in 1996, the John Deere 1270 Harvester has dominated harvester sales worldwide while setting the standard for durability and performance. And now the latest 1270E is the most powerful and productive yet. With its large 9.0-liter engine and CH7 Harvester boom, the 1270E performs at a level normally reserved for larger size-class harvesters. It is plenty powerful to handle ...
-
Manufactured by SICMA S.r.l.based in ITALY
RC (Combined picker) condenses the most advanced technology for harvesting olives and other hanging fruits. The machine require just one operator and permits to harvest the fruits in a short time and unload them directly into bin or trailers through the below hydraulic ...
-
Manufactured by Komatsu Forestbased in SWEDEN
Nimble and light, yet compact and powerful – and offering unmatched capacity. This may sound too good to be true, but this is the very combination that distinguishes our new harvesting head, the Komatsu 340 – tailor made for reliable, profitable multi-tree ...
-
Manufactured by AMB Roussetbased in FRANCE
Avoids harvesting before shaking and avoids to crash fruits. This machine removes, by a rotatory motion, the crop from the tires while the tractor is working. It can also be used to gather the crop on the path between the wheels (so as to form a ...
-
Manufactured by Afonso O. Costabased in PORTUGAL
Cut down, unbranch, peel and cut to length.Special steels for the structure and wear zones.Saw automatic lubrification.Active and passive protection of the saw.Automatic length ...
-
Manufactured by Munckhof Fruit Tech Innovatorsbased in NETHERLANDS
The semi-automatic tree shaker has been specially developed for an effective and efficient harvest of fruit for the food industry and for harvesting olives and nuts. In contrast to its fully automatic brother, the collection cloth of the semi-automatic tree shaker does not automatically unfold. ...
-
Manufactured by HSM Hohenloher Spezial-Maschinenbau GmbH & Co. KGbased in GERMANY
At first glance, there is not much to distinguish the 405H1 HSM harvester from its big brother, the H2. Why move away from a tried and tested configuration? On closer inspection, however, the 405H1 reveals itself to be an effective harvester for thinning forests with thin to medium trunk trees. Its profile, tailored to maximum performance, is characterised by the highly productive and lightweight ...
-
Manufactured by Kadıoğlu Makina San. Tic. Ltd. Şti.based in TURKEY
Kadıoğlu Vibrope is an economic harvester which aims to speed up harvesting time by vibrating bough or young trees to drop fruits. It is a system mounted back of tractor and taking its power from PTO which can work easily 15 hp or over all tractors. It makes harvesting of apricot, walnut, almonds, cherry, olive, orange and lemon easier and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you