Forestry Size Reduction Equipment For Forestry In Australasia
-
Manufactured by Savannah Global Solutionsbased in USA
Designed for lowland operations where a large mound is required to raise the planting site above wet season inundation. These trailing plows are fitted with either flotation tires, or full width rollers to carry the plow and are connected to the drawbar of a tractor or dozer. Horsepower requirements depend largely on spee d and depth of cut, as well as soil type. Ideally, bedding plows operate ...
-
Manufactured by Savannah Global Solutionsbased in USA
Trailing 10-disk stump-jump Disk Harrow fitted with 36" disks. Cuts 10-12 inches deep first pass, 14-16 inches second pass. Cuts 9.5 ft wide at speeds up to 5 mph (8kph). Designed to run on 250hp or greater 4wd Tractors or Forestry Skidders. Weight 15,000 ...
-
Manufactured by Tigercat Industries Inc.based in CANADA
The Tigercat 604C cable skidder is a powerful, yet compact machine suited to high value selective cut hardwood logging and steep slope applications. With high quality components and construction, the 604C is designed for long service life and high uptime.Turnaround™, the new two-position rotating seat, is standard equipment for the 630D. With all controls available, the operator can ...
-
Manufactured by DVOŘÁK - svahové sekačky, s. r. o.based in CZECH REPUBLIC
The latest model of legendary SPIDER mowers will surpass what you have expected from professional mowers so far. Thanks to the more powerful Kawasaki engines with EFI (Electronic Fuel Injection) technology, you will hardly come across a terrain that SPIDER couldn't ...
-
Manufactured by Berti Macchine Agricole S.p.A.based in ITALY
Hydraulic mulcher for grass, bushes, scrub and brushwood up to Ø 12 cm; equipped with single edge hammers, for skid steer loaders and compact track loaders from 70 to 120 HP. It can be used in several areas of land-management, set aside and green areas in general. Standard equipment: fixed universal hitch (SAE J2513), side skids, single edge hammers, hydraulic piston motor with drainage ...
-
Manufactured by Bomford Turner Ltdbased in UNITED KINGDOM
The Kestrel S Straight Arm Range has been designed to provide significant reach for farmers who need to keep weight in mind whilst retaining the versatile features of a more expensive machine. The Kestrel S Parallel Arm has the above features, with parallel geometry. While the Kestrel S Forward Arm has all the above features with visability benefits of the forward arm ...
-
Distributed by Forestquipbased in NEW ZEALAND
This trimmer is our smallest standard model. It has been developed especially for 'compact machines' or mini loaders and is well suited to trim lighter hedges. It has a work width of 1.5 m and can be mounted on e.g. a HKL-mini for frontloaders or on a HK Flex tool ...
-
Distributed by Sparks AGbased in AUSTRALIA
DCS 60 Wheeled Brushcutter is a heavy duty line-trimmer brushcutter that is offsetable left and right for mowing along fences and walls. Ideal for taming long and heavy grass on uneven ground, around trees and hard to get areas. Italian designed and made by Eco Tech Italia, the Eco Brushcutter range is ideal for the contractor, rural property owner and homes backing onto bush and reserve areas; ...
-
Manufactured by SEC Equipment Corporationbased in USA
The recommended operating pressure for the Tree Grinder is 20 MPA or 2,900 PSI. However it depends on the machine as well. The best way to find out is to start at 15 MPA or 2,175 PSI and increase the pressure until the power needed. Keep in mind that adjusting over 20 MPA of pressure is not ...
-
Manufactured by Bomford Turner Ltdbased in UNITED KINGDOM
The MicroKlippa is very popular with estate managers and horticulturalists who admire the MicroKlippa's fine cutting capabilities when hedge trimming and the versatility of the right or left hand cutting. Features Include, ...
-
Manufactured by John Deerebased in USA
Loggers demand maximum productivity and uptime out of their equipment shift after shift. And the 903K Tracked Feller Buncher delivers, big time. It features a powerful fuel-efficient engine, fast hydraulics for superb multifunction operation, deep cutting swath, and best-in-class head accumulation for maximum productivity. Quick, wide-open access to service items and major components along with ...
-
Manufactured by Tigercat Industries Inc.based in CANADA
Tigercat's innovative line of patented bunching saws, significantly improves the productivity of the entire harvesting system in high volume plantation applications. Buncher productivity increases because more trees can be cut per cycle reducing unnecessary machine movement. Skidder productivity is improved because the bunches are large, well aligned an easy to pick up.The 5000 bunching shear is ...
-
Manufactured by DVOŘÁK - svahové sekačky, s. r. o.based in CZECH REPUBLIC
SPIDER 2SGS is a remote controlled mower specially designed for the maintenance of turf areas around photovoltaic (PV) panels on solar farms. SPIDER 2SGS - adapted from SPIDER ILD02 features upgraded hydraulic engines and a lower profile, making it ideal for maintaining the turf beneath and around PV ...
-
Manufactured by McConnel Limited - a member of the Alamo Groupbased in UNITED KINGDOM
McConnel’s specialist compact Power Arm series combines the benefits of a light, fuel-efficient design with outstanding manoeuvrability and precision. Offering a choice of reach from 3.4m to 4.3m and deceptively powerful 30hp hydraulics, 30-series Power Arms can be fitted to a wide range of utility vehicles and compact tractors. The PA3430 and PA4330 can be mounted to the front or rear, ...
-
Manufactured by Berti Macchine Agricole S.p.A.based in ITALY
Hydraulic mulcher for grass, bushes, scrub and brushwood up to ø 5-6 cm., for skid steer loaders from 50 to 90 HP. It can be used in several areas of land-management, set-aside, green areas in general.Standard equipment: floating self-levelling universal hitch (SAE J2513), adjustable levelling roller, side skids, mechanical side shift, hammers (or blades), hydraulic geared motor with ...
-
Manufactured by Agrimasterbased in ITALY
When monted on excavator arms, they aresuitable for cleaning undergrowth and banks of rivers and ...
-
Manufactured by Agrimasterbased in ITALY
Simple and extremely reliable, the bush cutters of the SHARK B series are ideal working machines. In fact, they are particularly suitable for clearing ditches, road edges, banks and for the maintenance of public and private gardens ...
-
Manufactured by Bomford Turner Ltdbased in UNITED KINGDOM
The Bomford Pro-Cut range is heavier duty and offers double helix shaft technology delivering up to 45% overlap of the flails and belt driven protection against unseen debris when close cutting in hedge trimming. There are interchangeable shaft options allowing speedy flail change ...
-
Manufactured by Savannah Global Solutionsbased in USA
Eco-Til is a patent pending High Impact, Minimal Tillage technique used when mounted behind a sub-soil plow and closes the rip-line and thoroughly fractures soil without any inversion. This technique uses offset coulters mounted in a Stump Jump™ configuration to harness the effect of lateral forces that thoroughly break soil bulk density uniformly across a 650cm wide x 40cm deep zone. ...
-
Manufactured by DVOŘÁK - svahové sekačky, s. r. o.based in CZECH REPUBLIC
The SPIDER ILD01 mower is designed for fully professional use. It can be used to mow sloping and indented terrains and areas with restricted access for manoeuvring or where lightweight mowers are required. It is suitable for extensive and intensive mowing of medium-large ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you