Forestry Equipment in Germany

  • BonFlora - Winter Protection and Mulch Blanket

    BonFlora Winter Protection and Mulch Blanket of 100 % needle punched coir bound with natural latex , 100 % biodegradable.

    By BonTerra Weiland GmbH based in Nideggen, GERMANY. from Mulch Products Product line

  • Model Type HMZ - Flaker for Pre-Cut Timber

    The flaker by HOMBAK for pre-processed wood. Rotating transport chains continuously carry the cut-to-size timber to the knife shaft. Wherever robust flakers are needed for problem-free continuous operation, HOMBAK type HMZ flakers are the ideal solution.

    By Hombak Maschinen- und Anlagenbau GmbH based in Bad Kreuznach, GERMANY. from Shredder Technology Product line

  • Model Type HRA - Rotor Discharge Debarker

    Installation to remove small parts (bark, sand, etc.) following the rotor debarker. The individually propelled rollers support the optimal discharge from the HOMBAK Rotor debarker. Thanks to the modular design, the type and number of rollers can be optimally tailored to the material to be discharged.

    By Hombak Maschinen- und Anlagenbau GmbH based in Bad Kreuznach, GERMANY. from Shredder Technology Product line

  • HEN - Model PVM 240 - Plate Compactor

    HEN PVM 240 plate compactor for mounting on tractors.for the maintenance and repair of forest and field roads. After you worked on the surface with an levelling blade or grader, the road surface must be compacted.With an on an tractor mounted mechanical driven, divided plate compactor you reach the optimal compaction of the surface and the way is ...

    By Hen Ag based in Steinheim, GERMANY.

  • Model 102 Type BAS HL - Bale Fork

    Type BAS HL (for courtloader/skid-skeer-loader) thick material main tube with welded cones, high value full material, tine length 1000mm, height 600mm.

    By Hesse Metalltechnik GmbH based in Bad Sassendorf, GERMANY. from Courtloader Accessory Equipments Product line

  • Tamtron - Power Log Handler Scale

    A scale developed for quality verification and management of wood material flows, with the ability to accurately and quickly weigh wood material in motion. The information from weighing’s can be transferred to the business for utilisation in real time.

    By Tamtron Office in Beimerstetten, GERMANY. from Forest Industry Product line

  • Model SF-G - Sap Flow Sensor

    The SF-G sensor is the typical Granier sensor and consists of two needles

    By Ecomatik based in Dachau/Munich, GERMANY. from Sap Flow Sensor Product line

  • Model tk520 - Sweeping Machine

    By connecting the tk520, your ride on mower becomes a 1.2 m wide sweeping machine. No tools are required. Connect, and you're ready. The entire operation can be performed from the driver's seat. The rotating brush can be conveniently tilted to 5 positions. The brush operation is automatically switched off when the brushes are lifted. The tk520 is ...

    By Julius Tielbürger GmbH & Co. KG based in Stemwede-Oppenwehe, GERMANY. from RIde on Mowers Product line

  • Star - Cultivator

    The KRESS-Star-Cultivator is an important machine in the KRESS & Co weeding series. The range of use is enormous – from preparing ridges over inter-row weed control with protection shields up to soil accumulation in potatoes, carrots etc. With the exchangeable stars the working width starts at 60 cm from row to row. Thus, the KRESS Star ...

    By Kress Umweltschonende Landtechnik GmbH (K.U.L.T.) based in Vaihingen / Enz, GERMANY. from Mechanical Hoes Product line

  • Model 80 km/h - Wood Splitter Trailer

    Power and mobile! Columns, no matter where, with HMG wood splitter trailers up to 80 km / h. The log splitter trailer was designed for a road approvals, so that a quick and effortless transport is possible. The robust trailer with ball coupling and simple mechanical swivel device brings the device within a short time in the working position. ...

    By HMG Hess GmbH & Co. KG based in Reisbach (OT), GERMANY. from Wood Splitters Product line

  • Model 25 km/h - Wood Splitter Trailer

    Independent and mobile! The sturdy HMG wood splitter trailers bis 25 km / h with drawbar eye or ball coupling enables effortless and rapid transport of HMG-log splitter, whether with tractor or car. A simple mechanical swivel device -without expensive Hydraulikanlage- brings the device within a short time in the working position. The powerful ...

    By HMG Hess GmbH & Co. KG based in Reisbach (OT), GERMANY. from Wood Splitters Product line

  • JBM - Model 3927 DH - Full Hydraulic Grinders

    Low centre of gravity and therefore less risk of tilting over by compact design.Optimum engine protection, as the engine does not follow the tilting movements of the grinding arm, hence longer engine life.Full hydraulic wheel drive, including grinding wheel.Continuous speed adjustment of the swivelling arm.Hydraulically height-adjustable splash ...

    By Müllers & Backhaus GmbH & Co. KG based in Gewerbegebiet Große Riet, GERMANY. from Stump Grinders Product line

  • Model 104 Type ES HL - Dirt bucket

    Loading goods up to 1.600kg/m³. (for courtloader/ skid-skeer-loader). hardened cutting edge 110x12mm (HB 400). for widths of 1200mm, 1 inlying middle reinforcement

    By Hesse Metalltechnik GmbH based in Bad Sassendorf, GERMANY. from Courtloader Accessory Equipments Product line

  • AS - Model 21 4T B&S - Brush Cutter

    Mow, mulch, lunch break – with a 51 cm cutting width even in confined spaces and where the terrain has a slight incline. The distinctive 3-wheel concept of the best-known AS Motor classic is ideal for mowing and mulching in the smallest angles and even in narrow curves. The brush cutter AS 21 4T B&S is easy to steer, manoeuvrable, and it ...

    By AS-Motor Germany GmbH & Co KG based in Bühlertann, GERMANY. from Brush Cutter Product line

  • Lift Mast - Attachment for Tractor

    The lift mast with the bolted-on tree spade is attached to the hitch points of the tractor. The upper link is a hydraulic cylinder which can tilt the lift mast and align the tree vertically.

    By Optimal-Vertrieb Opitz GmbH based in Thalmaessing, GERMANY. from Attachment Product line

  • RUMED - Model S - Germinators

    From sample division over purity examination up to determination of germination – RUMED Germinators are the professional alternative to cooled incubators, wherever high reproducibility of the results is required.

    By Rubarth Apparate GmbH based in Laatzen, GERMANY. from Seed Line Product line

  • Model RE-TH 200/550/3 - Drum Chipper

    Respectable implementation for smaller and middle sawmills which like to process their rest wood gainful Nominal capacity: approx. 10-18 solid m³/h, depending on the kind of material and humidity.

    By Rudnick & Enners GmbH based in Alpenrod, GERMANY. from Chipping Technology/Drum Chipper Product line

  • Model DC1 - Circumference Dendrometer

    The Circumference Dendrometer 1 is the simpler version for the measurement of circumference changes of plants. The sensor is mounted on a wire cable with a very low coefficient of thermal expansion on the plant. The slide rings reduce the friction between the wire cable and the tree bark. They also decrease the pressure of wire cable on the tree.

    By Ecomatik based in Dachau/Munich, GERMANY. from Dendrometer Product line

  • Model DC2 & DC3 - Circumference Dendrometer

    The DC2 and DC3 are the improved version of the DC1. The tension is not applied in a tangential, but in the radial direction. The pressure of the wire cable to the tree is independent of tree size. The data of different tree sizes are comparable. The sensor is mounted on a wire cable with very low thermal expansion coefficient at tree. The slide ...

    By Ecomatik based in Dachau/Munich, GERMANY. from Dendrometer Product line

  • Tilting Table Saw

    Chromium alloy saw blade Ø 700 mm.  Maximum cutting diameter: 215 mm in table position, 240 mm in tilting position.  Comes standard with lengthwise cutting equipment comprising: splitting wedge, splitting wedge holder suitable for saw blade Ø 700 mm, protective cover and longitudinal stop. Mobile on two solid rubber wheels ...

    By POSCH Gesellschaft m.b.H. Office in Velden/Vils, GERMANY. from EasyCut | Circular Saws Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you