Forestry Equipment Near Slovakia
-
Manufactured by ANDRITZ Separation - ANDRITZ Groupbased in AUSTRIA
The rotary drum dryer is suitable for drying woody biomass, agricultural products, and municipal solid waste (MSW). For the production of alternative fuels as well as in the area of waste-to-energy, ANDRITZ Vandenbroek rotary drum dryers are applied to decrease the moisture of the material to the desired level fo downstream process ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil moisture sensors that measure the moisture tension in the soil are read out with the soil moisture meter Watermark. The measuring principle is similar to that of the gypsum block system. The special sensors however do not dissolve in the soil and have a more consistent distribution of pores so that more accurate measurements are ...
-
Manufactured by Konrad Forsttechnik GmbHbased in AUSTRIA
The aggregate WOODY is ideal in the altering use of harvester or processor works, and is used also successfully as pure harvester aggregate on harvesting ...
-
Manufactured by Konrad Forsttechnik GmbHbased in AUSTRIA
Max. felling diameter : 65. Max. delimbing diameter : 8-60 cm. Max. opening distance of the grapple : 125 cm. Delimb feed strength : 30 - 37 kN . Recommended engine power : 0 - 5 m/sec. empf. Antriebsleistung : 140 HP. Hydraulic system : 300-350bar;220l/min. Bar saw feed rate : 40 m/sec. Rotator : integrated rotator (endless). Machine control system : KonradMCS3.0. Weight : 1.350 kg. ...
-
Manufactured by Konrad Forsttechnik GmbHbased in AUSTRIA
A Quantum Step in Mobility and Flexibility. The new innovation Highlander is a high-performance harvester for middle and strong sized timber. In normal harvester terrain, the HIGHLANDER can move with special maneuverability. In steep and extremely diffi cult terrain, the machine reaches an enourmous terrain flexibility due to the syncronised step and drive movement. The HIGHLANDER offers more ...
-
Manufactured by Konrad Forsttechnik GmbHbased in AUSTRIA
The ground carriage Pully is characterized by short assembly times, possibility of use in swamps, a broad spectrum of use, terrain independence and simple ...
-
Manufactured by Konrad Forsttechnik GmbHbased in AUSTRIA
Skyline cable: 600m / 20mm comp. Mainline cable: 650m / 12mm comp. Mainline winch: 40kN / 5 (8) m/sec. Crane lifting force: 220 kNm. Turning force: 42 kNm. Tower height/crane reach: 13,5 m / 9,1 m. Basic unit/power: MAN TGS 33.400 6x4 BB (400 HP) or MAN TGS 33.440 6x6 BB (440 ...
-
Manufactured by Standen Engineering Ltdbased in UNITED KINGDOM
Imants are specialist in soil fumigation and biofumigation ...
-
Manufactured by SITTRANS s.r.o.based in SLOVAKIA
EQUUS 175N UN is the EQUUS 175N BH version with EQUUS 120 hydraulic arm with a grapple (size 0.35 as standard) and a clambunk with automatic clamping (optional). The grapple may also be in the version with a saw. Hydraulic arms are available in the following lengths: 6.1 m, 7.5 m (double telescope) and 9.5 m (double telescope). This is the best-selling version suitable for the majority of ...
-
Manufactured by SITTRANS s.r.o.based in SLOVAKIA
The light basic concept of forestry skidder EQUUS 175N BL with front blade, rear shield and winch. EQUUS is the ideal choice for users, who are accustomed to classic type of work and prefer work only with the winch and blade. We offer a wide range of additional equipment for this model. Weight of skidder begins at 8.500 kg. Meet the most efficient forestry skidder in its category, EQUUS 175N ...
-
Manufactured by SITTRANS s.r.o.based in SLOVAKIA
The heavy basic concept of forestry skidder EQUUS 175N BH with front blade, rear shield and winch. EQUUS is the ideal choice for users, who are accustomed to classic type of work and prefer work only with the winch and blade. We offer a wide range of additional equipment for this model. Weight of skidder begins at 10.000 kg. Meet the most efficient forestry skidder in its category, EQUUS 175N BH! ...
-
Manufactured by SITTRANS s.r.o.based in SLOVAKIA
First 6-wheel vehicle model of EQUUS offers combined utilization. Except loading and carrying out of timber bulk, there is also a possibility for the customers to buy harvester head. Therefore it's possible to produce, load and transporttimber with one machine at the same time. The lowest centre of gravity predetermines it for work in most challenging terrains. . Weight of skidder begins at ...
-
Manufactured by SITTRANS s.r.o.based in SLOVAKIA
EQUUS 175N UH is the EQUUS 175N BH version with EQUUS 120 hydraulic arm with an installed harvester head. Hydraulic arms are available in the following lengths: 6.1 m, 7.5 m (double telescope) and 9.5 m (double telescope). This is the best-selling version suitable for the majority of ordinary tasks where a high performance is required for a short time. The weight of the machine starts from c. ...
-
Manufactured by Wikar Oy Abbased in FINLAND
KRONOS 6020 is designed in accordance with the wishes of professional users. The sturdy crane booms and high quality hydraulic components guarantee efficient working hours for the years ahead. Hydraulic hoses are well shielded inside a protective cover. The hoses are dimensioned for large amounts of oil flow to the grapple. This enables the efficient use of diversified felling and energy grapples ...
-
Manufactured by Wikar Oy Abbased in FINLAND
Models 100 H, 120 H, 100 4WD, and 120 4WD are dual-beamed. This has made it possible to keep the trailer frame structure low and the trailer's centre of gravity low also when carrying a load. The sturdy structure of the trailers is able to accommodate even the heavier loader ...
-
Manufactured by Wikar Oy Abbased in FINLAND
The KRONOS 140 4WDM forestry trailer has a sturdy set of bogey axles based entirely on mechanical transmission, with the power generated by the drive shaft being transmitted via a drive gear and a differential gear system to the bogie housings on both sides of the machine. There is no elastic or disc clutch inside the bogey housing, the gears being in constant contact with each other. Road safety ...
-
Manufactured by Wikar Oy Abbased in FINLAND
Kronos 4000 is an excellent loader for farm and forest applications. Its motion paths are very practical and its lifting force even throughout its lifting range. Being flange-mounted, the loader can be mounted either onto the tractor’s frame or on a forestry ...
-
Manufactured by Wikar Oy Abbased in FINLAND
Models 100 H, 120 H, 100 4WD and 4WD are two-trailer trailers. This helped to keep the frame structure low as well as the low center of gravity of the trailer, even during full load. The robust construction of the trailer allows for the installation of even higher models of forestry cranes. Trailers can be tailored to your individual needs. Kronos forestry trailers offer various options for crane ...
-
Manufactured by Wikar Oy Abbased in FINLAND
The new Kronos 5020 series is a new addition to the already comprehensive range of Kronos forestry machinery. The starting point for the design of the machine was a desire to develop a timber loader that had a chassis that was both durable and light. We achieved both of these objectives and we are now able to proudly present the perfect loader for any tractor use. Two basic models are available, ...
-
Manufactured by Wikar Oy Abbased in FINLAND
Kronos 5000 has acquired a vast and faithful body of users. Its high lifting force, optimised motion paths and short main boom make the 5000 an extremely agile and productive loader for thinning operations. With two hydraulic extensions, it has a maximum reach of 7.5 metres, despite the loader’s short main boom (2.6 metres). Models L, XL and XXL are recommended for purposes requiring long ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you