Timber Handling Equipment For Forestry In Europe
-
Manufactured by Albuttbased in UNITED KINGDOM
Hardox fork tines - welded. One piece grab. Ideal for bundles of cut timber. Handles green waste and tree stumps. Smallest log dia - 6 x 325mm. Largest log dia - 1 x 800mm. Opens to 1684mm. Twin hydraulic ...
-
Manufactured by Tajfun Liv d.o.o.based in SLOVENIA
The »K« family cranes are distinguished by their power and robustness. During transport, these cranes can be parked longitudinally on the load or in the loading area. They are distinguished from other non-folding cranes by the power link between the main and outer boom. This enables additional increase of the lifting moment in the horizontal position. The K-cranes with a great variety ...
-
Manufactured by Hassela Skogsprodukter AB (HSP)based in SWEDEN
Our terminal grapple is designed to handle large of volumes of wood at sawmills, timber terminals, harbour facilities etc. its stable and robust design makes it both reliable and user friendly. The Terminal closes tip to tip, and it has twin chains that keep the timber in place even when the grapple does not have a full ...
-
Manufactured by M Large Tree Services Ltdbased in UNITED KINGDOM
Palms cranes are a combination of attention to detail and durability. Palm's crane models are engineered based on practical use and personal ...
-
Manufactured by M Large Tree Services Ltdbased in UNITED KINGDOM
Palms cranes are a combination of attention to detail and durability. Palm's crane models are engineered based on practical use and personal ...
-
Manufactured by Hombak Maschinen- und Anlagenbau GmbHbased in GERMANY
The flaker by HOMBAK for pre-processed wood. Rotating transport chains continuously carry the cut-to-size timber to the knife shaft. Wherever robust flakers are needed for problem-free continuous operation, HOMBAK type HMZ flakers are the ideal ...
-
Manufactured by RSL Engineeringbased in UNITED KINGDOM
New to RSL, timber cranes for 3 point linkage mounting or trailer mounting. The cranes have reaches capable of 4.1m upto 7.5m. All cranes have twin joystick control and 4 hydraulic cylinders powering the swivel. The one shown on the Unimog is the 4.1m version. ...
-
Manufactured by John Deerebased in USA
Since its introduction in 1996, the John Deere 1270 Harvester has dominated harvester sales worldwide while setting the standard for durability and performance. And now the latest 1270E is the most powerful and productive yet. With its large 9.0-liter engine and CH7 Harvester boom, the 1270E performs at a level normally reserved for larger size-class harvesters. It is plenty powerful to handle ...
-
Manufactured by Nisula Forest Oybased in FINLAND
Nisula P30T is a vertical-post parallel crane designed for the Nisula 325H harvester head. In the T-model, the crane is equipped with a hydraulic extension. The weight and the reach of the crane are in suitable proportion with the properties of the Valtra A-series tractor. The P30T parallel crane makes timber harvesting and loading effortless and also saves ...
-
Manufactured by Hassela Skogsprodukter AB (HSP)based in SWEDEN
The V-Shape is similar to our standard grapple, and has been specially designed to make fine sorting easier. Ground contact is minimised, using a V-Shape. Since the tip of the claw is centred, force distribution is not affected and the risk of uneven loading is eliminated in ...
-
Manufactured by Rottne Industri ABbased in SWEDEN
The forwarder is equipped with 8 wheels and a load capacity of a full 14 tonnes. Hydraulically operated headboard and front bunk makes Rottne F13D very versatile when handling different timber lengths. The forwarder can alternatively be equipped with width adjustable load bunks (Wide Load) and hydraulic stakes, which increases its flexibility and load capacity from 4,7 m2 to 5,5 ...
-
Manufactured by HMG Hess GmbH & Co. KGbased in GERMANY
Hydraulic log splitters with petrol engine and wood splitters trailer to 80 km / h. Power and mobile! Columns, no matter where, with HMG wood splitter trailers up to 80 km / h. The log splitter trailer was designed for a road approvals, so that a quick and effortless transport is possible. The robust trailer with ball coupling and simple mechanical swivel device brings the device within a short ...
-
Manufactured by Logosol UKbased in UNITED KINGDOM
Logosol Norwood LM Pro MX34, known as the LumberMate Pro in North America and the UK, is an entirely new sawmill that has all the advantages you would otherwise find in a significantly larger and more expensive band sawmill. This mill delivers what you expect from it, and gets the job done quietly and efficiently. The band wheels are cast in steel, and they are large - 520 mm (20.5”) in ...
-
Manufactured by Süma BGU-Maschinenbased in GERMANY
Mounting to both front and rear loaders of the tractor is possible with the HRZ ...
-
Manufactured by Vortex Hydra S.r.l.based in ITALY
Wide selection of packaging configurations are available from Vortex Hydra. Single well proven machines can be combined to satisfy virtually any packaging requirement from 25 to 150 pieces per minute for interlocking roof tiles, fittings and customized products. A remarkably popular addition such as the Drying Rotary Rack can be incorporated in the system providing customers with the competitive ...
-
Manufactured by BMF (OÜ Lisako)based in ESTONIA
Timber crane with telescope, max reach 6,5m. Timber crane for your forestry. This crane comes with a telescope and a max, reach up to 6,5m. This crane is a high-performance machine featuring quality workmanship. Expandable with our accessories ...
-
Manufactured by Alucar Oybased in FINLAND
ALU 75 represents 7-ton bunk. Most practical and really reliable bunk for timber ...
-
Manufactured by Tigercat Industries Inc.based in CANADA
Tigercat's innovative line of patented bunching saws, significantly improves the productivity of the entire harvesting system in high volume plantation applications. Buncher productivity increases because more trees can be cut per cycle reducing unnecessary machine movement. Skidder productivity is improved because the bunches are large, well aligned an easy to pick up.The 5000 bunching shear is ...
-
Manufactured by Nisula Forest Oybased in FINLAND
The Nisula P99.5T parallel crane is equipped with a hydraulic boom extension enabling 10.5 metre reach. The crane’s lifting capacity in relation to the weight is optimum and sufficient for the entire motion range. This ensures effortless ...
-
Manufactured by Farmikko Oybased in FINLAND
Weight approx. 43 kg. Maximum opening approx. 82 cm. Maximum operating pressure 210 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you