Wood Testing Equipment For Forestry Available In Connecticut
-
Manufactured by Shenzhen Xingzhibang Inst. & Eqpt. Co., Ltd.based in CHINA
Professional Digital Multifunction Moisture Meter 0-80% XZBELEC DX-106 For Hay straw bale alfalfa square bale shavings soap wood powder tester humidity analyzer. The Moisture Meter DX-106 is a high-tech testing instrument. The new designed moisture meter with extensive probes suits to many material moisture contents testing, such as chemical raw material, plastic granule, soap powder, Chinese ...
-
Manufactured by Best Harvestbased in USA
WCT-1 Wood Chip Moisture Tester measures the moisture content of firewood, wood pellets and other wood materials. To take a measurement use the necessary amount of wood samples from the debris of a motorized chainsaw. This tester can also measure the moisture content of regular sawdust as well. The tester shows the moisture content of the material in weight ...
-
Manufactured by Best Harvestbased in USA
Designed for testing the moisture content of logging residue, the tester can obtain measurements directly from a load of material or from a sample gathered into a bucket. Measurements are taken from a 7.75" diameter zone between the metal tip of the probe and the dish portion of the tester. The tester features four scales for various types of residue: wood chips, fine logging residue chips, ...
-
Manufactured by Inovatec Machinerybased in CHINA
Rotary barrel tumbling machines are the oldest way of surface finishing. Yet, it is still widely used because of its low cost. Barrel sizes available are 140X2L, 300X2L and 500X2L. Rotary barrel tumbling machines are the oldest way of surface finishing. Yet, it is still widely used because of its low cost. Barrel sizes available are 140X2L, 300X2L and 500X2L. In barrel tumbling process, the ...
-
Manufactured by TEKPRO Ltd.based in UNITED KINGDOM
The Holmen NHP100 is our entry level Pellet Durability Tester which is designed to be easily transported around different testing locations. The NHP100 operates by loading a manually weighed sample of pellets into the test chamber, which cascades them in an air stream, causing the pellets to collide with each other and the perforated hard surfaces of the test chamber. After the test cycle the ...
-
Manufactured by G & P Garbellotto S.p.A.based in ITALY
The toasting is the process that enhances the flavors of the wood catalyzing those already present in the same and positively evolving them. Until now this process was realized on a brazier fed with pieces of oak where it was placed the barrel or cask. It is clear that the wood evolves these aromas according to toasting temperatures, which must be on the range of 170/180/200 degrees centigrade ...
-
Manufactured by TEKPRO Ltd.based in UNITED KINGDOM
The Holmen NHP200 Pellet Durability Tester is the flagship of the New Holmen pellet testing range. Once a sample of pellets is loaded into the machine it removes any fines, weighs the sample, tests the pellets by agitating them with air, weighs the remaining sample and calculates the PDI. This automatic solution removes the chance of human error, creating accurate and reliable results. The ...
-
Manufactured by Kett USbased in USA
Utilizing the principle of high frequency capacitance, the HM530 provides instant moisture content measurement on all wood species. In addition, it can be used on milled wood, press board and other composite applications where moisture content varies based on the depth of the measurement. Pin-type analyzers are obsolete since the HM530 does not require any sort of sample alteration or ...
-
Manufactured by TEKPRO Ltd.based in UNITED KINGDOM
The Holmen NHP300 Pellet Durability Tester is ideally suited to a busy mill. Samples are automatically taken from the production line, tested, returned to the line, and a PDI result provided to the NHP300 control software, or to your current mill management software. Taking a sample from the process line enables changes to be made at a point that will maximise production, reduce cost, minimise ...
-
Manufactured by Inovatec Machinerybased in CHINA
Rotary barrel tumbling machines are the oldest way of surface finishing. Yet, it is still widely used because of its low cost. Barrel sizes range from small size as 25L to huge barrel size 500L. Rotary barrel tumbling machines are the oldest way of surface finishing. Yet, it is still widely used because of its low cost. Barrel sizes range from small size as 25L to huge barrel size 500L. In barrel ...
-
Manufactured by TEKPRO Ltd.based in UNITED KINGDOM
The Ligno Tester is aimed specifically for wood pellet producers wishing to quickly cross-reference their test results against the ISO17831-1:2015 standard. Once a sample is manually weighed and loaded into the tester, the Fine Material Amount (F) cycles lasts 30 seconds and Mechanical Durability (DU) test cycle lasts 60 seconds. Fines and dust are removed during the DU test cycle, resulting in ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you