Young Tree (Young Trees) Equipment
-
PremiumManufactured by Feucht Obsttechnik GmbHbased in GERMANY
For trunk diameter up to 40 cm. The vibrating units are controlled by 2 hydraulic motors and this means achieving a dynamic start. The opening and closing, as well as the vibration and the orientation of the clamp is controlled via a joystick in the driver cabin. The tractor must have at least 80 ...
-
PremiumManufactured by Feucht Obsttechnik GmbHbased in GERMANY
For trunk diameters of 10 to 60 cm. The trunk shakers differ in terms of how they are controlled. This is done either via the tractor control device or the hydraulic control devices (mechanical / electrical) installed in the shakers. The VHB trunk shaker is delivered without a hydraulic control device. The VHD trunk shaker is equipped with a mechanical control device. The VHE trunk shaker has an ...
-
Manufactured by EcoXtrusionbased in NETHERLANDS
Tree protectors are frequently used to protect young trees against damage caused by various wild animals, chemicals and mowing. Increasingly, these products are coloured white (reflective) to avoid damage caused by the sun’s rays. Especially there where the area is covered by snow for longer periods, young ...
-
Manufactured by Olema Engineering Ltdbased in UNITED KINGDOM
The Towmore trailer with Tree supports has been adapted to carry many bare root young trees. It is versatile and can be designed to suit your nursery requirements. ...
-
Manufactured by Srotec GmbHbased in GERMANY
Tying machines provided with the well-known and proven AXRO gripping and knotting technology. Strapping machines are foreseen with reliable and robust strapping heads. From chives to trees and shrubs/young trees, for each Product a solution in our programme ...
-
Manufactured by Greenmax B.V.based in NETHERLANDS
Many (young) trees, shrubs and hedges in urban environments are plagued by drought. This is usually caused by a disturbed soil structure and/or the fact that rainwater hardly penetrates the soil. This drought causes young trees to root poorly or to come under stress, resulting in reduced vitality that makes them susceptible to ...
-
Manufactured by PE Agroremmash - Plusbased in UKRAINE
Contour pruning machine ОСК - 9 is used for cutting branches and shaping crowns of orchard trees, is equipped with disk saws (40 cm in diameter) and has 3 working contours. Such machine is effective while pruning both young trees where branch thickness does not exceed 3-5 cm and old plantations where branches are up to 10 ...
-
Manufactured by Xinle Gude Plastic Net Co., Ltd.based in CHINA
, it is more heavy and strong. It gives extra support for climbing plants and protects young trees and plants from animals damaging. It can be installed with wooden posts, widely used against wall and as guard fence at ...
-
Manufactured by Kadıoğlu Makina San. Tic. Ltd. Şti.based in TURKEY
Kadıoğlu Vibrope is an economic harvester which aims to speed up harvesting time by vibrating bough or young trees to drop fruits. It is a system mounted back of tractor and taking its power from PTO which can work easily 15 hp or over all tractors. It makes harvesting of apricot, walnut, almonds, cherry, olive, orange and lemon ...
-
Manufactured by Groasis BVbased in NETHERLANDS
Do you suffer from grazing animals like sheeps and goats? Or are there wild rabbits nibbling at your crops or young trees? Groasis has found the perfect solution for these problems! The Groasis Growsafe Telescoprotexx is a cheap and flexible solution to protect your plants, trees and bushes and to let them grow safe. The unique green ...
-
Manufactured by TOL, Inc.based in USA
Shake and catch pistachios in bins or bulk. Shake, catch, and windrow almonds, minimizing need to sweep. Best suited for orchards with a minimum 19” trunk clearance. Works for young and mature trees that utilize mechanical ...
-
Manufactured by SICMA S.r.l.based in ITALY
TF80 is the frontal telescopic single arm mounted on tractors (wheeled or tracked) for the harvest of both young and centuries-old trees. The TF80 is coupled to the tractor by a double reinforced frame fixed on the drive unit chassis. Equipped with an independent hydraulic circuit (with rear oil tank), it is operated by the tractor's ...
-
Manufactured by Mecaflorbased in FRANCE
Automatic bunching machine used to put elastics. Operates with all kind of products: potted plants, rosebushes, young wine, small trees, asparagus, strawberry plants, flower bouquets... Put an elastic on the 4 hooks and it will be automatically detected and opened. Put your mylar and push a pot into the hole and it will be wrapped once the ...
-
Manufactured by SICMA S.r.l.based in ITALY
Self-propelled harvester designed for the fast shaking of nut trees, both young and mature orchards. It has a telescopic lateral arm which allow to reduce the inefficiencies due to the maneuvers. The N3 has 2-wheel drive with the front steering wheel. The lateral vibrating head (inclined by 90°) and supported by the telescopic arm, ...
-
Manufactured by DIG Corporationbased in USA
components with eight different nozzles and are suitable for applications in the irrigation of seedlings, young saplings and mature ...
-
Manufactured by SICMA S.r.l.based in ITALY
visual to the operator who tightens frontally the trunk or branches, up to 5 m in height. The double arm is strong and reliable, suitable for both young and centuries-old trees. The TLX 100 cannot be coupled with the reverse umbrella. Solid, stable and effective, the TLX 100 is the specialized double telescopic arm for the harvesting of large-size ...
-
Manufactured by Panagrotiki S.A.based in GREECE
Mechanically welded frame - Shaker head independent from the frame, suspended by 4 chains - Oil tank : 30 l (VHB-D) or 140 l (VHE-F) WEIGHT AND DIMENSIONS - Weight : 660 kg (VHB-D-E) or 760 kg (VHF) - Length : 3 m / Width : 1,70 m / Height : 1,15 m VHE-AUD-L04 VHF vue commerciale 2011 ...
-
Manufactured by FACMA s.r.l.based in ITALY
The inter-row disk is an accessory which can be mounted on the mulcher Facma, ideal for the infesting grass cutting in the inter-rows and around the trees trunks. It works carefully and with extreme agility, without damaging the bark. It can be used for all arboreal cultivations and it permits to avoid the use of chemical products. It is ...
-
Manufactured by FACMA s.r.l.based in ITALY
It connects with the main transmission and it allows the shredder to work precisely and carefully around the plants without damaging the bark. It can be used on the long grass around the stalks with no need to use weed killers, thus contributing to the protection of the environment. The inter-row disk is suitable for uneven ground and all types of arboreous cultivations. The height and angle of ...
-
Manufactured by DIG Corporationbased in USA
and serves as a secondary nozzle, keeping the droplet size even and providing excellent distribution uniformity. The mini-compact micro sprinklers use interchangeable components with a wide selection of nozzles suitable for applications in the irrigation of seedlings, young saplings and mature ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you