Orchard Pruning Equipment For Horticulture
-
PremiumManufactured by Feucht Obsttechnik GmbHbased in GERMANY
Clear fruit between the rows of trees. The fruit blower is primarily used in intensive juice fruit orchards and is connected to the rear of the tractor on the PTO shaft. The blower blows away fruit between the rows of trees and blows it into the drive paths for harvesting. The blower has a very powerful air stream and is therefore able to blow away a lot of fruit. The fruit blower 1201 is ...
-
PremiumManufactured by Feucht Obsttechnik GmbHbased in GERMANY
Sort up to 4 tonnes of fruit per hour with the professional fruit sorting trolley. The Fruit sorting trolley FC is ideal for professional plantation owners or fruit farmers with large orchards. The fruit cleaning trolley is equipped with a conveyor belt and a large bunker. In addition, the trolley can be aligned by using a hydraulic support leg. Grass and leaves can be separated from the fruit by ...
-
PremiumManufactured by Feucht Obsttechnik GmbHbased in GERMANY
With these harvesting devices, a significant increase in productivity can be achieved in the short juice fruit harvesting season, while at the same time increasing profitability. The OB 70 R is the smallest picking machine / collecting machine with high emptying. The Briggs & Stratton motor with 15.5 hp makes it possible to achieve a fast drive of up to 11 km/h. The collecting machine also ...
-
Manufactured by Davco Manufacturing Ltd.based in CANADA
Choosing a brush cutter for your rubber track loader or skidsteer is an important business decision. For efficiency and money and productivity, you want to make that selection based on what you’ll be cutting, the terrain, desired end results, and Ultimately, the Cost Per Acre ...
-
Manufactured by Orizzonti s.r.l.based in ITALY
This machine model is top of the range in terms of robustness; it is ideal for pruning of orchards, olive groves, citrus groves of 8-10 cm maximum diameter, and suitable for tractors of 40-100 hp. The strength of the POWER cutter is in its structure that is highly robust and heavy with double reinforcement plate, anti-wear and provided with rounded side to avoid damaging the stem during work. The ...
-
Manufactured by Suterrabased in USA
CheckMate® Puffer® CM-O Pro is Suterra’s optimized aerosol release formulation for codling moth (CM) mating disruption in apples, pears, walnuts and other crops where CM is a pest. This proprietary formulation results in enhanced aerosolization of the pheromone creating a spray that better penetrates targeted areas of the canopy. The fast-to-deploy product releases a precise, ...
-
Manufactured by Orizzonti s.r.l.based in ITALY
The MIX REV reversible cutter, suitable for work on grass, shoots of vineyards, orchards and cornstalks, ideal for tractors of 40-80 hp. MIX REV, the name leaves no room for doubt, the best you could wish for from a cutter with dual work mode, front and/or rear thanks to the double robust castle with three points, double reinforced sheeting to compensate for large impacts, liquid painted ideal to ...
-
Manufactured by FA.MA. Pruning System Srlbased in ITALY
Frontal lopping machine for green and dry pruning. Lopping machine for summer (green) and dry pruning applied to an all-purpose tractor with frontal attachment or standard flanging. It is provided with a hydraulic control valve and it makes use of the tractor hydraulic system with a minimum pump requirement of lt.25. It is given complete with: vertical mowing bar from 1,80 mt to 2,10 mt, wheels ...
-
Manufactured by B.M.V. s.n.c.based in ITALY
The new mechanical thinning machine can be used in any kind of orchard; it helps in obtaining a fruit more excellent both in size and quality, without any use of chemical substances. As a consequence the costs and working times are considerably reduced, always granting an excellent ...
-
Manufactured by Peruzzo Srlbased in ITALY
The BULL grass/pruning shredder is used for grass cutting and pruning cutting up to 5 cm of diameter. The BULL model with closed rear cover is used in urban, municipality green areas, motor ways, airports etc. The BULL model with open rear cover is used in wide agriculture fields to reduce maize stalks, cotton, or grass and pruning on wine yards, orchards ...
-
Manufactured by B.M.V. s.n.c.based in ITALY
The new mechanical thinning machine can be used in any kind of orchard; it helps in obtaining a fruit more excellent both in size and quality, without any use of chemical substances. As a consequence the costs and working times are considerably reduced, always granting an excellent ...
-
Manufactured by B.M.V. s.n.c.based in ITALY
The B.M.V. "S 800K" trimming machine has been studied to lop kiwi green trees. The machine is applied to the front part of the tractor. The power is supplied by the tractor hydraulic intakes or by an independent hydraulic unit. Hardened steel blades ensure the best quality of lopping with high cutting speeds (2000/2500 rev./min) even when the tractor moves fast along. The special belt drive used ...
-
Manufactured by Paul Vidgen Forest Machines Ltdbased in UNITED KINGDOM
Applications: Landscaping, Farming, Municipal, Site Preparation, Composting. Functions: Slash reduction, recreating trails, reducing thin timber stands, mulching slash piles, brush cutting, orchard pruning, pasture restoration, eradicating undesirable vegetation. Technical Description:The AHWI M450 Mulcher is an attachment for smaller tractors with three point linkage and PTO drive. The 1800 mm ...
-
Manufactured by Ledgard Pruning Systemsbased in AUSTRALIA
This forklift mount full system includes a highly speced extra heavy duty cutter bar with fork frame, Pivot and bump guide allows pruning of material in any desired way. Weather its skirting of citrus trees or hedging macadamias this machine is capable of doing it all. The Ledgard double acting scalloped blade design ensures the cleanest cut first time every time. The pivot and pump guard work ...
-
Manufactured by Suterrabased in USA
Protect your organic acres with the quality mating disruption platform you’ve come to trust, Puffer®. The Puffer® is now available for navel orangeworm control in organic acreage. CheckMate® Puffer® NOW-O Ace™ is Suterra’s aerosol pheromone release formulation for navel orangeworm (NOW) mating disruption in organic nut crops, figs, and other crops where the navel ...
-
Manufactured by Orizzonti s.r.l.based in ITALY
The STAR cutter is an ideal machine for the treatment of shoots of vines and/or orchards of 5 cm in diameter, suitable for tractors of 30-70 hp. The highly robust configuration of the machine ensures excellent work performance, due also to the careful and precise balancing of the rotor and of the respective self-sharpening rods. The complete transmission of gear box with free wheel, which is ...
-
Manufactured by Crendon Machinerybased in AUSTRALIA
Vineyard SADIE (rubber flaps) is available in double and single sided models. It is a vine cane sweeper which clears prunings and debris from under vines, improving hygiene. It also assists in giving clean ground for pre-emergence herbicide ...
-
Manufactured by Rinieri S.r.l.based in ITALY
New high density-spindle orchard pruner suitable in all kind of varieties like apples, apricots, cherries, olives until 4m (13’) high of the trees. The single acting sickle bar with “SCH” teeth can work with branches up to Ø 3-4 cm (1,2”-1,6”). To adapt the machine to all kinds of orchards are available a number of accessories like top bars or bottom bars. In ...
-
Manufactured by FA.MA. Pruning System Srlbased in ITALY
Lopping machines with knifes bilateral model: Minimum opening: 1,10 mt. Max opening: 1,80 mt. Height range adjustment: 50 cm. Optional: horizontal toppings. ...
-
Manufactured by Davco Manufacturing Ltd.based in CANADA
Choosing a brush cutter for your rubber track loader or skidsteer is an important business decision. For efficiency and money and productivity, you want to make that selection based on what you’ll be cutting, the terrain, desired end results, and Ultimately, the Cost Per Acre Cleared. The Davco® Industrial strength rotary Brush Cutters are hard to beat when you’re doing roadside, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you