Plant Growth Chambers Equipment For Horticulture
-
PremiumManufactured by Aralabbased in PORTUGAL
Reach-in environmental simulation plant growth chambers designed for diverse applications in biotechnology and plant research. With unparalleled control over temperature, humidity, airflow, and photoperiod, these chambers offer a range of options to cater to nearly any research ...
-
Manufactured by Powers Scientific, Inc.based in USA
Developed with Mother Nature in mind, these chambers offer digitally controlled temperature and lighting, with day/night cycles to simulate the nurturing environment seeds and plants need for successful growth. The standard models shown below feature clock controlled temperature (hi/low) and lighting (on/off) suitable for studying seed germination and growth in many plant species. These chambers ...
-
Manufactured by Hettich Instrumentsbased in USA
INTERNAL VOL.: 968 L. LIGHT SPECTRUM: White, 95% Sunlight. DIMENSIONS: 1295 x 910 x 2050 mm. Room for Growth – discover the advantages of Hettich Plant Growth Chambers ...
-
based in GERMANY
The phytotron consists of 5 growth chambers. a view in one of climate thermo-light chambers Two are walk-in climate thermo-light chambers, type KTLK 20 000-IV (manufacturer: NEMA-Industrietechnik GmbH) with a net usable area of 6 m2 each, and three plant-growth chambers, type HB/VB 1514 (manufacturer: Vötsch Industrietechnik GmbH ) with a usable area of 1.3 m2 each. The technical ...
-
Manufactured by BioChambers Incorporatedbased in CANADA
Features: 0.7m2 (8ft2) of plant growth area per compartment. 685mm (27”) of growth height per compartment. 750µmol m-2 s-1 PPFD of lighting. Ideal for plants requiring medium light intensities. Two separate compartments with independent scheduling and environmental control. Channel floor system for uniform airflow. Easy access to mechanical/electrical system for ease of ...
-
Manufactured by Agri Makina Imalat San. Tic. A.S.based in TURKEY
Container types starting from 100 Kg/day up to 500 ...
-
Manufactured by POL-EKO A.Polok-Kowalska sp.k.based in POLAND
Application: growth of plants and fungus. Seeds germination. Microorganisms and insects breeding. Photostability tests. Food preservation tests. Any kind of research that requires a stable temperature and humidity environment (optionally light). Tests of building ...
-
Manufactured by Espec MIC Corpbased in JAPAN
TGE is a standard type growth chamber that is assembled insulation panels. Sunshine Ace, a HID lamp for plants, is used as the light source. This specific light source reproduces a light environment that is very similar to natural sunlight. This chamber can be prepared in a customized size depending on the installation space and ...
-
Manufactured by Percival Scientific, Inc.based in USA
This chamber is designed for seed germination and ...
-
Manufactured by Powers Scientific, Inc.based in USA
Our Model TCS33SD plant tissue culture chamber was designed for micropropagating Arabidopsis thaliana or other species from plant tissue cultures in tightly controlled temperature and lighting conditions. This plant growth chamber has four slide out shelves, with low velocity conditioned air delivered uniformly under each shelf from a louvered plenum running down the rear wall of the chamber and ...
-
Manufactured by Agri Makina Imalat San. Tic. A.S.based in TURKEY
Stable types starting from 400 Kg/day up to 2000 ...
-
Manufactured by BioChambers Incorporatedbased in CANADA
Features: 1.8m2 (20ft2) of plant growth area per tier, 520mm to 1780mm (20½” to 70”) of growth height from 3 tier to 1 tier mode, 750µmol m-2 s-1 to 1500µmol m-2 s-1 PPFD of lighting from 3 tier to 1 tier mode, Ideal for flexible research requirements - short plant to tall plant conversion, Converts from 3 tier to 2 tier to 1 tier - no tools, kits, or hardware ...
-
Manufactured by Powers Equipment Company, Inc.based in USA
Our Model TCS33SD plant tissue culture chamber was designed for micropropagating Arabidopsis thaliana or other species from plant tissue cultures in tightly controlled temperature and lighting conditions. This plant growth chamber has four slide out shelves, with low velocity conditioned air delivered uniformly under each shelf from a louvered plenum running down the rear wall of the chamber and ...
-
Manufactured by Agri Makina Imalat San. Tic. A.S.based in TURKEY
Custom types starting from 2000 Kg/day up to 50000 ...
-
Manufactured by Espec MIC Corpbased in JAPAN
TGC is a factory-made, integrated-type growth chamber. Users can use this chamber immediately upon introduction. Air flow is introduced on ground level in order to protect the plants from damage by direct wind. This chamber can be customized upon request, and the light source can be chosen from a few options (i.e. fluorescent lamp and ...
-
Manufactured by BioChambers Incorporatedbased in CANADA
Features: 0.3m² (3ft²) of seed germination area per tray. 230mm (9”) of growth height per tray with 5 trays supplied with chamber (maximum 30 trays). 18µmol m-2 s-1 PPFD of lighting. Ideal for seed germination trials requiring high humidities. Externally mounted lights allowing high humidities inside the chamber. Stainless steel interior finish. Small footprint maximizes ...
-
Manufactured by Powers Equipment Company, Inc.based in USA
Developed with Mother Nature in mind, these chambers offer digitally controlled temperature and lighting, with day/night cycles to simulate the nurturing environment seeds and plants need for successful growth. The standard models shown below feature clock controlled temperature (hi/low) and lighting (on/off) suitable for studying seed germination and growth in many plant species. These chambers ...
-
Manufactured by CETS LLCbased in USA
Phytotrons are chambers that provide controlled environmental conditions for growing plants. Phytotrons have been extensively used for research on how various environmental factors affect plant growth and development. However, the CETS phytotrons are designed specifically for the commercial production of AstroTubers™ (potato minitubers), rather than for research purposes. Consequently, ...
-
Manufactured by CETS LLCbased in USA
The nutrient requirements for effective growth, development, and tuberization of the potato plants growing in the phytotrons at each stage of the growth process are provided by a proprietary mixture of the required chemicals in water. Although this nutrient solution can be termed as the classical Modified Hoagland solution, the actual composition of the nutrient is vastly different from any ...
-
Manufactured by Convironbased in CANADA
The GEN2000 SH kit is ideal for short plant growth in propagation, genetics, physiology and other moderate light experiments. Horizontal airflow over multiple shelves optimizes growth area for shorter plants, like Arabidopsis. The GEN2000 comes standard with broad-spectrum, energy-saving LED lighting. For those wanting more growth space, an extra tier is available as an ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you