Horticulture Equipment Near Puerto Rico
-
Manufactured by Sofscape Caribe Inc.based in PUERTO RICO
Sofscape Equine Rubber Pavers are the ideal slip resistant rubber surface that provides extraordinary footing support and cushion. For Equine applications we have two thickness 2″ and our new 1 1/2″ both thickness offer the same drainage ...
-
Manufactured by De Gier Drive Systemsbased in NETHERLANDS
Specifically for use in screen installations, De Gier offers the powerful S drives. With a minimum number of drives it is possible to control a maximum area of screens. These GW series drives have the following specific features: Equipped as standard with 12B z18 sprockets and matching duplex chains. The weld sprocket is available for 2" drive tube. ...
-
Manufactured by De Gier Drive Systemsbased in NETHERLANDS
This GW series has the following specific features: Compared to the other motors in the GW series, they have a different adjustment range and higher rpm. Used in combination with GWK worm gearboxes for indirect drive of systems. Equipped as standard with 08B Z16 sprockets and 08B-2 duplex chains. As a standard the 8.0 rpm version is equipped with 10B Z16 sprockets and 10B-2 duplex chains. ...
-
Manufactured by De Gier Drive Systemsbased in NETHERLANDS
The THG RKGC end-wall ventilation systems have the following characteristics: There are three types of gear rack systems for end-wall ventilation: THG25RKGC, THG55RKGC and THG76RKGC. Each type is supplied complete with a rack for stroke length 750 mm, 900 mm or 1100 mm. Coupling to the push-pull tube by means of 27 mm or 32 mm coupling sets. The input shaft of the gearcase can be connected to a ...
-
Manufactured by De Gier Drive Systemsbased in NETHERLANDS
This GWK series has the following specific features: Equipped with one input shaft and two output shafts. Equipped as standard with 10B Z16 sprockets and 10B-2 duplex chains. ...
-
Manufactured by De Gier Drive Systemsbased in NETHERLANDS
THG RK gear rack systems are used in truss-rail ventilation systems in Venlo greenhouses. They are mounted against the column. General features are: Suitable for column widths 50 and 60 mm and column depths 80, 100, 120 and 140 mm. The rack centreline is 60 mm from the top of the truss. Coupling sets, sleeve joint couplings, shaft locking clips and/or shaft locking rings are available to ...
-
Manufactured by De Gier Drive Systemsbased in NETHERLANDS
This GWK series has the following specific features: Equipped with a continuous input shaft and two output shafts. Equipped as standard with 10B Z16 sprockets and 10B-2 duplex chains. ...
-
Manufactured by De Gier Drive Systemsbased in NETHERLANDS
This GW series has the following specific features: GW10 to GW80 are equipped as standard with 10B Z16 sprockets and 10B-2 duplex chains. GW100 is equipped with 12B Z18 sprockets and 12B-2 duplex ...
-
Manufactured by De Gier Drive Systemsbased in NETHERLANDS
An optimal climate in the greenhouse is important for maximising yield. Balanced natural ventilation of the various sections in the greenhouse contributes to this. For this we offer a wide range of gear rack systems for Venlo greenhouses. These systems are coupled to the push-pull tubes of the ventilation system, which opens or closes the ventilation windows. We distinguish between various ...
-
based in NETHERLANDS
Application: In contrast with generic manure types, poultry manure is very rich in nutrients as nitrogen (N) & phosphorus (P), but also in organic material. Both the form and the N/P ratio in which the nutrients are present make the manure less suitable for direct application as natural fertilizer. It leads to the release of large and undesired amounts of volatile ammonia into the ...
-
Manufactured by Seko Industries Srlbased in ITALY
Suitable to process green residuals coming from landscape maintenance, pruning and tree trunks included, pallets, market and cumbersome ...
-
Manufactured by Seko Industries Srlbased in ITALY
Suitable to process pruning with Ø 8-10 cm, green and biological wastes and different products for composting ...
-
Manufactured by Seko Industries Srlbased in ITALY
Suitable to process green residuals coming from landscape maintenance, pruning and tree trunks included, pallets, market and ...
-
Manufactured by Seko Industries Srlbased in ITALY
Suitable to process green residuals coming from landscape maintenance, pruning and tree trunks included, pallets, market and cumbersome ...
-
Manufactured by Seko Industries Srlbased in ITALY
Suitable to process pruning with Ø 2-4 cm, green and biological wastes and different products for composting ...
-
Manufactured by Seko Industries Srlbased in ITALY
Suitable to process pruning with Ø 8-10 cm, green and biological wastes and different products for composting ...
-
Manufactured by RainWise Inc.based in USA
The superior technology of the AgroMET Weather Station with the addition of the IP-100 to upload your weather data to the ...
-
Manufactured by Dynamax Incbased in USA
After more than 25 years of experience and a worldwide experience with sap flow sensor manufacturing and design, the Dynamax team brings you the latest innovations and sap flow sensor construction advancements. With continuous customer feedback over the years, and through several years of research, we solved many of the commercial and research needs for a more plant friendly and user-friendly sap ...
-
Manufactured by Dynamax Incbased in USA
The Dynagage Sap Flow Sensors are the latest technology for measuring the sap flow, and thus the water consumption of plants. These energy balance sensors measure the amount of heat carried by the sap which is converted into Real-Time sap flow in grams or kilograms per hour. The sensors are non-intrusive and not harmful since the plants are heated up 1°C to 5°C ...
-
Manufactured by Dynamax Incbased in USA
The newest method of transpiration measurement is now available from Dynamax for large trees and plants. The Thermal Dissipation Probe (TDP) transpiration sensor measures sap velocity which is converted to volumetric flow rate. TDP is a simple and affordable device originally proposed by Granier. The basic TDP probe has two thermocouple needles inserted in the sapwood, the upper one containing an ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you