Pruning Equipment For Horticulture Available In Virginia
-
Manufactured by Vision Robotics Corporation (VRC)based in USA
While robots are now capable of performing many tasks, it is not always easy. VRC's vision-based algorithms enable robots to autonomously create three-dimensional maps of unknown areas of interest whether this is mapping a building or modeling a grapevine. The maps and models enable robots to intelligently and accurate perform a myriad of tasks whether it is vacuuming a floor or pruning a ...
-
Manufactured by Felco SAbased in SWITZERLAND
Curved saw - Full-stroke pruning saw - Blade 33 cm (13 in.). The FELCO 630 pull-stroke saw is the choice for taking on heavy duty cutting and pruning. The curved design of the innovative blade cuts through even large branches up to 12cm/4.7 inches with ease, even when cutting overhead. The high performance tooth setting combined with the curved blade optimizes the entire blade length, quickly ...
-
Manufactured by Vine Tech Equipmentbased in USA
The Concord Pre-Pruner is a Pellenc Pre-Pruner plus a design by Vine Tech Equipment specifically designed for juice grapes such as Concord and Niagara. Vineyard managers have been very satisfied with quality job these pruners perform. These pruners are great way to cut costs by greatly reducing hand ...
-
Distributed by George F. Ackerman Companybased in USA
The professional sales associates at George F. Ackerman Co. are ready to assist you with choosing the proper orchard or nursery pruning equipment to fit your needs. Some of the equipment we carry includes: Brewt Power Systems Maibo Air Powered Pruning ...
-
Manufactured by Tecnomabased in FRANCE
Soil protection : soil compaction limited thanks to its lightness and its wheel dimensions . Engine power : transfer of the engine power towards the traction capacity. Important steering angle : maneuverability in U-turn. Important drivability : torque/transmission. Flexibility and control of speed ranges, able to work at very low speeds with high progressivity. Power take-off adjustment : power ...
-
Manufactured by Frumaco / www.frumaco.debased in ITALY
Fruit picking machine for row distances of 3,60 to 4,50 metres and plant heights to a maximum of 3,80 metres. Designed to be multi-purpose, it has a generous standard equipment, including the automatic trailer and the air compressor for 6 to 8 pruning shears. The CF 110 can be employed in many seasonal tasks. Equipped with a 4 cylinder Diesel engine, it has a top speed of 18 km/h. The four ...
-
Manufactured by Landmark Plastic Corporationbased in USA
Cell diameter (inches) 2.19. Cell depth (inches) 3.00. Max liquid volume (U.S. / metric) 4.90 fl oz/145.0 mL Max dry volume (cubic inches) 8.85. Pieces per carton 1920. Cartons per pallet 36 ...
-
Manufactured by Campagnola S.r.l.based in ITALY
PONY PRO is the lightest electric vineyard pruning shear by Campagnola. Its main features are balance, speed (favored by four cutting modes and a short-stroked trigger). Moreover, it is a very handy tool thanks to its slim ergonomic shape and its highly flexible cable. In addition to its forged steel blade group, this electric shear is fitted with a techno-polymer body and a comfortable handgrip ...
-
Manufactured by Mtb Mfg Inc -Baumalightbased in CANADA
The Incisor Tree Limb Shear brings sheer brute power to your excavator with the simple effective way to cut limbs and branches up to 15' in diameter. With its innovative design, operators can safely and quickly prune large trees. Incisor is a versatile tool that can also cut and maneuver large limbs on the ground. The bucket-linkage Tree Limb Shear directly connects in place of the bucket and is ...
-
Manufactured by TOL, Inc.based in USA
Specifications: Working Height: 36ft (11 meters). Load Capacity: 660lbs (300 ...
-
Manufactured by Lobo Products, Inc.based in USA
Professional A grade cowhide leather work gloves. Thorn resistant - Protects your hands from anything that could puncture or scratch you such as lemon trees thorns, rose bushes, bugambilias, branches in general, cactus, and much more. Gauntlet cuff provides extra protection to forearms. Unlined. ...
-
Manufactured by Giampi S.r.l.based in ITALY
The flail mower model MASTER allows cutting shoots, corn, straw and pruning up to a diameter of 8 cm. This machine is suitable for the preparation of fruit groves, vineyards and especially hazelnut and chestnut groves, which are mechanically harvested. The sturdy steel structure features a large electronically-balanced rotor, mounted on perfectly guarded self-centring bearings. Possibility of ...
-
Manufactured by ERO GmbHbased in GERMANY
Shoot Binder With a capacity of 4000 staples, the roll-feed automatic stapler can bind more than one hectare of vines between refills. Standard equipment includes garn stop, clamping pincer and clearing device. It is suitable for both front and over-hood ...
-
Manufactured by Schieler Harvesterbased in USA
This is a model 788 harvesting prunes in for the 1995 season. A model 588 Schieler Harvester Bin Carrier is seen in the foreground with Nick Schieler on the operator's platform, waiting to service bins to the ...
-
Manufactured by Husqvarna ABbased in SWEDEN
The Husqvarna 445 e-series chainsaw is a second generation powerful semi-professional chainsaw for people who need a little more performance. Ideal as a pruning chainsaw, or for felling or chopping firewood. It's an easy start chainsaw that can be started with a slower pull on the starter cord than most other chainsaws because of its clever Smart Start technology. The 445 e-series has an auto ...
-
Manufactured by Huron Fruit Systemsbased in USA
The Work Platform is for growers who are in need of a simple, reliable, robust platform for tree maintenance operations. Similar to the Harvest Platform, the Work Platform has easy on and off, multiple levels, as well as stop and start function. This configuration allows multiple workers to tend to the trees simultaneously from different heights. What's more, with self propulsion, workers will no ...
-
Manufactured by Tierre Group Srlbased in ITALY
Professional flail mower for vineyards and orchards. Inter-row flailmower for vineyards and orchards, for grass and pruning up to Ø 6 cm. A series of technologies, such as the Adaptive Geometry and the Multi-Aggressive rotor, make it a multi-purpose and professional machine. Available in the versions: 140-160-180-200. PUMA PLUS: 40 – 70 ...
-
Manufactured by Frumaco / www.frumaco.debased in ITALY
A compact machine for row distances from 3,00 to 4,00 metres and plant heights to a maximum of 3,60 metres. The generous standard equipment and a complete range of accessories allow the machine to be adapted to the individual needs of modern fruit growers. Equipped with a reliable 3-cylinder diesel engine, it has a fuel consumption and emission level in accordance with the TIER 4 norm. The four ...
-
Manufactured by BFM SNCbased in ITALY
The stainless-steel blades of the VINEYARD TRIMMER CM-SN are designed to give a suction effect, allows the pruning of even the most young shoots, thanks to mirror polishing decreases the deposit of green. The pantograph system synchronized to 4 movements allows use both in small spaces and in very large spaces (550 mm min. to 1.550 mm max at the center of the machine), while having reduced ...
-
Manufactured by Bosen Garden Machinery Co., Ltdbased in CHINA
Width: 1.5mm-2.5mm. Length: 7”, 7.5”, 8”, 9”. Handle material: Stainless steel. Blade material: Carbon steel. Handle color: Any color is available. Type: Garden pruning shears. Package dimension: . Packing: blister card, PVC bag, Any packing is ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you