Pruning Equipment For Horticulture In Africa
-
Manufactured by FACMA s.r.l.based in ITALY
The pruning picker-up shredder COMBY is a trailed agricultural machine which is able to harvest and crumble residues of every kind of pruning. The produced models are 3: COMBY TR 140, COMBY TR 160, COMBY TR 200, with working width respectively of 140, 160 and 200 ...
-
Manufactured by TOL, Inc.based in USA
Specifications: Working Height: 36ft (11 meters). Load Capacity: 660lbs (300 ...
-
Manufactured by Andermatt Biocontrol AGbased in SWITZERLAND
A wettable powder concentrate of a beneficial aerial Trichoderma atroviride strain for protection of pruning wounds and diseases like Botrytis. T-77 can be sprayed and is effective against Botrytis on leaves, flowers and fruits. In the same way pruning wounds on grapevines and other fruit trees are protected against the entrance of ...
-
Manufactured by Seko Industries Srlbased in ITALY
Suitable to process pruning with Ø 8-10 cm, green and biological wastes and different products for composting ...
-
Manufactured by TOL, Inc.based in USA
Shake and catch pistachios in bins or bulk. Shake, catch, and windrow almonds, minimizing need to sweep. Best suited for orchards with a minimum 19” trunk clearance. Works for young and mature trees that utilize mechanical ...
-
Manufactured by Infaco s.a.sbased in FRANCE
The F3020 electric pruning shear is the worthy heir to the F3015. After over 6 years of research, tests and fine-tuning, INFACO is proud to present its latest model of pruning shears. A genuine concentrate of technology, the F3020 builds on the highly respected F3015 technical base adding many improvements to allow our clients to continue using the best tool available on the market. Loaded with ...
-
Manufactured by TOL, Inc.based in USA
The TH1100CT-H topper hedger is a medium duty, self propelled machine designed to cut wood up to 3 inches in diameter. The center tower design allows the machine to be utilized in almost all orchards: citrus, stone fruit and nuts. ...
-
Manufactured by Officina Meccanica B&Gbased in ITALY
BGP 3000L is used in agriculture for lopping or pruning orchards, citrus plantations, olive groves, hazelnut orchards, etc... This version is suitable for all types of orchards and it can make horizontal topping maximum 3.5 m (11.5 ft) It is installed in front of the tractor by universal front mount. The innovative and patented double blade system, allows a shear cut with considerable advantages ...
-
Manufactured by Seko Industries Srlbased in ITALY
Suitable to process green residuals coming from landscape maintenance, pruning and tree trunks included, pallets, market and cumbersome ...
-
Manufactured by FACMA s.r.l.based in ITALY
The Pruning Picker up-Shredder Comby permits to triturate and to gather the pruning residues until a diameter of 90 mm, once crumble the pruning residues are deposit in a wide capacity container, which through the pantograph rising takes the material cut up until a height of 2,60 m to download it in an easy and fast ...
-
Manufactured by TOL, Inc.based in USA
The HS900W kit is designed to perform mechanical topping, hedging and skirting. This is one of our most versatile kits, well suited to citrus, nut and deciduous trees and an excellent choice for skirting. The HS900W is designed to cut branches up to 2 inches in diameter The HS900W Kit was designed with the small to medium sized grower in mind. The kit can be mounted on their tractor during the ...
-
Manufactured by Ledgard Pruning Systemsbased in AUSTRALIA
These bars are specifically designed for very dense timber such as almonds, olives and large old vineyards. The extra heavy duty cutter bar requires a large oil supply from either tractor or a PTO-driven power pack. They are a modified version of our Heavy Duty Cutter Bars, but with larger hydraulic motors and a redesigned blade assembly to suit the bigger cuts. Extra Heavy Duty Cutter Bars are ...
-
Manufactured by Seko Industries Srlbased in ITALY
Suitable to process pruning with Ø 2-4 cm, green and biological wastes and different products for composting ...
-
Manufactured by Officina Meccanica B&Gbased in ITALY
AF SPECIAL is an accessory that, thanks to its characteristics, can prune all branches, even the very high ones. It can be used in agriculture for pruning fruit trees and other plantations, where there is sufficient distance between the rows of plants. It can be installed on any telehandler, with adequate technical characteristics. The operator can handle both the operation of the machine and the ...
-
Manufactured by Ledgard Pruning Systemsbased in AUSTRALIA
These bars, available in lengths from 0.8m to 3.1m, are made for heavy duty work and carry two double acting blades with the Ledgard scalloped teeth. The one-piece blades are hydraulically driven and machined from a specially selected steel, renowned for its toughness. Vibration free operation and minimum maintenance have been designed into the system. Custom made pivots are avaible to suit you ...
-
Manufactured by TOL, Inc.based in USA
Dual boom hedger topper: Heavy duty. Designed for commercial operators and larger growers. Appropriate for most tree crops. Variable-speed rotating crosses. Six 32-inch-diameter saw blades. Available self-propelled, mounted on our 6-cylinder power unit. Hedges both sides of a row in a single pass. Clean cuts for easy brush removal from the tree ...
-
Manufactured by Officina Meccanica B&Gbased in ITALY
BGP 4000A is used in agriculture for lopping or pruning orchards, citrus plantations, olive groves, hazelnut orchards, etc... This version is suitable for all types of orchards and it can make horizontal topping maximum 4.5 m (14.8 ft). It is installed in front of the tractor by a universal front mount. The innovative and patented double blade system, allows a shear cut with considerable ...
-
Manufactured by Seko Industries Srlbased in ITALY
Suitable to process pruning with Ø 8-10 cm, green and biological wastes and different products for composting ...
-
Manufactured by Ledgard Pruning Systemsbased in AUSTRALIA
Add and Ledgard cutter bar system to a barrel pruner to give you the best possible finish with your pruner. Barrel pruners have a habit of leaving material around the sides of the canopy. Why not add Ledgard bars and framing to clean this ...
-
Manufactured by TOL, Inc.based in USA
TOL introduces a new line of pruning machines for ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you