Tree Handling Equipment For Horticulture In Canada
-
Manufactured by Bush Hog - a member of the Alamo Groupbased in USA
Whether you need to drill holes for posts, tree plantings, structural support members or other tasks, Bush Hog has a post hole digger to meet your needs. Our three 2400 Series models fit both Cat. 1 and Cat. 2 tractors. Augers are offered in both standard and heavy duty versions in sizes from 6 inches to 24 inches depending on digger model. Tough soil penetration is no problem for the powerful ...
-
Manufactured by Agriclé inc., A division of Avenord Companybased in CANADA
Manure squeegee made of premium plastic and ammoniac resistant. Wood handles sold separately. 16'' long (41 ...
-
Manufactured by Dutchman Industries Incbased in CANADA
Dutchman's on-going commitment to building quality nursery machinery continues with the introduction of our new "Tree Tyer". The focus on building a quality tyer meant that a top ring was needed to funnel the branches accordingly. It also called for a hydraulic gate system and an inverted steel ring. The inverted steel ring allows for a smoother rotation with less chance of the ring coming into ...
-
Manufactured by Holt Industrialbased in CANADA
Ready to spade thousands of trees and recommended for trunk sizes up to 5.5' the Holt 50S has a 50' rootball diameter. The Holt 50S is ready to be mounted to your skidsteer, other mounting options are available contact for ...
-
Manufactured by Hoskin Scientific Limitedbased in CANADA
Root research is executed to improve the insight in the possibilities for root growth (depth and concentration) of the root system of trees and plants. In general it is important to all plants to have a dense and extensive root system in the soil. An extensive root system allows the plant to benefit from a large volume of soil. If sufficient quantities of nutrients and water are present the ...
-
Manufactured by Bush Hog - a member of the Alamo Groupbased in USA
Whether you need to drill holes for posts, tree plantings, structural support members or other tasks, Bush Hog has a post hole digger to meet your needs. Our three 2400 Series models fit both Cat. 1 and Cat. 2 tractors. Augers are offered in both standard and heavy duty versions in sizes from 6 inches to 24 inches depending on digger model. Tough soil penetration is no problem for the powerful ...
-
Manufactured by Premier Tech Horticulturebased in CANADA
When seeking the ideal balance between air porosity, drainage capacity and water retention, PRO-MIX HPCC is the solution growers select. With unique chunk coir reducing soil compaction and carefully selected peat moss, this formulation provides qualities promoting growth and offering a delicate, well-calculated control over the root zone. PRO-MIX HPCC provides growers what they need to optimize ...
-
Manufactured by Dutchman Industries Incbased in CANADA
Dutchman’s straight-blade 60” truck mount is ideal for digging up to 6” trees. This unit can be mounted to a 33,000GVW, single-axle truck. Minimum cab-to-axle needs to be 120 inches. An optional “Wobble-Tail” can be manufactured for this unit as well making it an ideal, compact package for digging in tight areas. Built with the same quality and durability you have ...
-
Manufactured by Dutchman Industries Incbased in CANADA
Dutchman offer's a large selection of spade tarps, not only Dutchman spades but others brand's as ...
-
Manufactured by Weremczuk FMR Sp. z o.o.based in POLAND
Maintenance of cleanliness between rows of bush and trees is one of the care treatment, which you have to regularly repeat on your plantations or in your orchard. KS 220R mower-shredder eliminates the necessity of using herbicides. It can be also used for destroying ground-part of old berry-bush plantations. An additional rotor attached to the swing arm enables maintaining cleanliness in the ...
-
Manufactured by Holt Industrialbased in CANADA
Ready to spade thousands of trees and recommended for trunk sizes up to 3.5" the Holt 34S has a 34" rootball diameter. The Holt 34S is ready to be mounted to your skidsteer, other mounting options are available contact for details. ...
-
Manufactured by Volvo Construction Equipmentbased in USA
The Volvo MCT135T tracked loader is designed to help you reach a higher level of performance. With a unique, single loader arm design and easy maintenance, we're ready for all your ...
-
Manufactured by Vermeerbased in USA
The TS20 mini tree spade contains all the Vermeer innovations that you need. With its narrow profile, it zips in and out of tight rows at the nursery to dig out, lift and plant trees up to 2”/5 cm in diameter. Not only is it easy to operate, the TS20 is easy to maintain, too, because it features hydraulic ...
-
Manufactured by Halltech Environmental and Aquatic Research Inc.based in CANADA
These hammers are made from tempered 4135 chrome moly steel. The handles are turned on a lathe in Canada from American hickory. Wood absorbs shock far better than the techie options such as fiberglass or rubber covered steel and is favored for ...
-
Manufactured by Palax Ylistaron Terästakomo Oybased in FINLAND
The Palax D410 meets the needs of even the most demanding professionals. With an improved pusher design, the D410 will allow you to manage wood more easily. Additionally, it boasts increased splitting speed, more highly developed crushing and holding of the crusher and maintenance of the chains has been made ...
-
Manufactured by Dutchman Industries Incbased in CANADA
Dutchman’s curved-blade 100” truck mount is ideal for digging up to 12” trees. This unit needs to be mounted to a Tandem Axle Truck with 20,000 fronts and 46,000 rears. Cab-to-trunion needs to be approximately 205 inches or longer.. Dutchman 100” spade is ideal in digging larger trees but we would recommend a pusher axle to handle the increase weight. Built with the same ...
-
Manufactured by Dutchman Industries Incbased in CANADA
Dutchman’s straight-blade 55” truck mount is ideal for digging up to 5.5” trees. The overall weight of the unit is light enough to go on a 20,000GVW, single-axle truck. Minimum cab-to-axle needs to be 84 inches. Built with the same quality and durability you have come to know from ...
-
Manufactured by Agriclé inc., A division of Avenord Companybased in CANADA
Ecomomic manure fork with flexible teeth made of plastic. Wood handle sold separately (300.0449, 300.0450 and 300.0451). Suevia farmline product. Made in ...
-
Manufactured by Mechanical Transplanter Companybased in USA
Positive action V-3 plant holders with special gearing for faster planting. Special 10' deep shoe with replaceable curved point. Quick- change spacing gears. 20' Coulter to protect the shoe 1 cushion seat is standard ...
-
Manufactured by Lemar Tree Spadesbased in CANADA
The Lemar 200 Gallon Potter completely greaseless design with 4″ solid frame construction will provide years of low maintenance, reliable service. The 200 Gallon Potter can dig a root ball range from 25 – 100 gallons. Lemar high quality potters come standard with a universal skid steer quick-attach hitch plate and high-flow/variable speed hydraulic valve saving you valuable time ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you