Irrigation Monitoring Equipment For Irrigation In Illinois
-
Manufactured by Profile Products LLCbased in USA
Profile Lawn & Landscape Soil Conditioner is comprised of porous ceramic particles that won’t decompose or break down over time like peat. The balanced structure and pore space is permanent. Whether it’s in containers, hanging baskets, planting beds, vegetable gardens, backfill around trees or shrubs, for lawn maintenance or aerification, porous ceramics create ideal conditions ...
-
Manufactured by Lindsay Corporationbased in USA
Increase your yields by making better use of your land with a 9500PL irrigation system. Apply the correct amount of water at the right time uniformly - in every part of your field. Furrow irrigation systems fall short in this area, providing too much water in some areas and not enough in others. But this easy-to-use, economical, and reliable hose-fed or ditch-fed system can replace your ...
-
Manufactured by SeaMetrics, Inc.based in USA
The TX100/200-Series are adjustable depth insertion turbines that come in brass or 316 stainless models to fit 3' to 40' pipe. Adapters mate with standard 1-1/2' (110/210) or 2' (150/250) FNPT threaded fittings such as saddles and weldo-lets which may be purchased either locally or from Seametrics. Ruby bearings and a non-drag pickoff give these adjustable insertion turbine flow sensors a wide ...
-
Manufactured by SeaMetrics, Inc.based in USA
The TX800-Series are insertion turbine meters designed for use in 1-1/2' to 8' pipe. High-quality jewel bearings and precision shafts ensure long life and low friction. Available in 316 stainless steel, brass and PVC. sensor bodies are machined from solid rod for maximum low-flow performance.TheTX800-Series use special fittings thatensure ease of installation and correct depth setting in the ...
-
Manufactured by SeaMetrics, Inc.based in USA
The AG2000 is a spool-type electromagnetic flowmeter for use in irrigation applications in 3' to 12' pipe. With no moving parts, these meters provide unobstructed flow and are resistant to wear from debris found in ground or surface water. Little maintenance is required because there are no bearings to wear out or propellers to stop turning. Minimal straight pipe requirements allow AG2000 meters ...
-
Manufactured by SeaMetrics, Inc.based in USA
The TX100/200-Series are adjustable depth insertion turbines that come in brass or 316 stainless models to fit 3' to 40' pipe. Adapters mate with standard 1-1/2' (110/210) or 2' (150/250) FNPT threaded fittings such as saddles and weldo-lets which may be purchased either locally or from Seametrics. Ruby bearings and a non-drag pickoff give these adjustable insertion turbine flow sensors a wide ...
-
Manufactured by Netafim USAbased in USA
UniRam is the industry's most advanced pressure compensating dripline. Its specially developed drippers operate with the poorest water quality, in the most difficult environments and irrigates the steepest terrains with the highest uniformity. UniRam is the most reliable dripline for surface and subsurface ...
-
Manufactured by Netafim USAbased in USA
M and WMR Water Meters are the industry's smallest water meters. They offer the best cost, performance and long life. The M utilizes the multi-jet principle assuring an equally distributed load on the impeller minimizing wear and maintaining accuracy. The WMR contains an in-line axial turbine which allows foreign matter to pass through the meter without clogging. Wide clearances in the measuring ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you