Irrigation Sprinkler (Irrigation Pipe) Equipment
-
Manufactured by An Jarl Enterprise Co., Ltd.based in TAIWAN
DEAR DEER AJ-101 single irrigation sprinkler hose is the basic type of sprinkler hose. This type is a single flat hose, simple and low price. To lay this hose we had better pull in the hose tensely, clamp it at the end and fix the end clip on the ground. This reduces turn aside spraying when the flat hose expands into a cylindrical and ...
-
Manufactured by Rolland Sprinklersbased in FRANCE
1/2' male threaded inlet. Trajectory angle : 7° or 16°. Front nozzle from Ø2.5 to Ø3.2 mm. Discharge from 0.29 to 0.64 m³/h. Radius from 6.8 to 9.7 meters. Working pressure : 2.5 to 3.5 bars. Full ...
-
Manufactured by An Jarl Enterprise Co., Ltd.based in TAIWAN
AJ-102 DEAR DEER Twin Irrigation Sprinkler Hose is the type of most stable sprinkler hose. It is best designed to overcome the problem of spraying aside of the single sprinkler hose. Saves a lot of labor cost to patrol in the field to find side sprays and turn the hoses. A sprinkler hose is a flat hose with many ...
-
Manufactured by OZDOGANPLAST PLASTÄ°Kbased in TURKEY
Sprinkler irrigation is an irrigation system that consists of spraying the water needed by the plant in the form of rain under a certain pressure. Water is transmitted by pressure to the sprinkler heads. The individual sprinkler system consists of water supply, pump unit, main pipeline, vertical pipeline and ...
-
Manufactured by Simkar Plastikbased in TURKEY
SÄ°MKAR PLASTÄ°K sprinkler irrigation pipes offer a system that conveys the water from the source to the field, orchards, and gardens and let the waterfall on the soil in the form of rain droplets. The pipes and fittings can be disassembled after completing irrigation in an area and they can be placed in other fields. They ...
-
Manufactured by Tulip Polymersbased in INDIA
. Are also offering various size and diameter, thickness, quality as per client requirement. Sprinkler Irrigation: Sprinkler pipe also made from HDPE, in viewing of maximum output with limited time sprinkler system is commonly used In agriculture. We also deal in sprinkler irrigation ...
-
Manufactured by Akkon Plasticbased in TURKEY
Clamped Sprinkler Irrigation Pipes 5 ...
-
Manufactured by Wade Rain, Inc.based in USA
The Poweroll is a mechanized sprinkler irrigation system that takes the hard work out of moving sprinkler irrigation pipe, saving time, labor, and ...
-
Manufactured by Rolland Sprinklersbased in FRANCE
1/2' male threaded inlet. Trajectory angle : 7° or 16°. Front nozzle from 015 to 2.5 mm. Discharge from 0.12 to 0.39 m3/h. Radius from 5.8 to 9.0 meters. Working pressure : 2.5 to 3.5 bars. Full ...
-
Manufactured by Masna Plastik A.Sbased in TURKEY
Vertical and undulating terrains which cannot irrigated with the surface irrigation methods can irrigated with the Springer irrigation system without requiring any ...
-
Manufactured by Rolland Sprinklersbased in FRANCE
1/2' male threaded inlet. Trajectory angle : 7°. Front nozzle from Ø1.8 to 2.5 mm. Discharge from 0.175 to 0.386 m³/h. Radius from 8.50 to 9.0 meters. Working pressure : 1.5 to 3.5 ...
-
Manufactured by Simkar Plastikbased in TURKEY
Pipe with Latches 5 Mt. Pipe with Latches 6 ...
-
Manufactured by OZDOGANPLAST PLASTÄ°Kbased in TURKEY
Sprinkler irrigation is an irrigation system that consists of spraying the water needed by the plant in the form of rain under a certain pressure. Water is transmitted by pressure to the sprinkler heads. The individual sprinkler system consists of water supply, pump unit, main pipeline, vertical pipeline and ...
-
Manufactured by Akplas ASbased in TURKEY
Irrigation Pipe With Latch ...
-
Manufactured by Akplas ASbased in TURKEY
Irrigation Pipe With ...
-
Manufactured by STF Sulama Sistemleribased in TURKEY
STF Sprinkler pipes are produced from high density polyethylene (HDPE) raw material. It has high resistance to UV rays, heat and pressure environments. Suitable for use in sprinkler systems, drip irrigation systems and as a carrier line for water transportation. In our standard production, the diameters are between 50 mm and 160 mm, and ...
-
Manufactured by STF Sulama Sistemleribased in TURKEY
STF Line Valve is a user-friendly product used in agricultural irrigation processes, with its easy installation. it is a user-friendly product with its easy installation, it is designed to be able to open and close water easily without expending extra ...
-
Manufactured by ERHAS Pipe and Machinery Equipment Industry Inc.based in TURKEY
Impact resistant, sun-proof, shatter-proof pipe. Resistant to corrosion. Resistant to microorganisms and rodents. Possibility of easy installation under all kinds of terrain conditions. Ease of carrying and assembly. Water-proof safe gasket system which eliminates water-loss. Providing of full compliance with the other sprinkler irrigation ...
-
Manufactured by Akkon Plasticbased in TURKEY
Sprinkler Irrigation Pipes Latch 5 ...
-
Manufactured by AL-Magor Professional Toolsbased in ISRAEL
The original patented tool for punching 2, 3, or 4mm hole in 16 – 20 mm pipes. This tool provides the easiest means of holing pipelines for fitting all types of sprinklers, connectors, and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you