We couldn't find any irrigation pumps equipment suppliers or service providers located in Tennessee
Here is a list of equipment results with suppliers serving Tennessee
Irrigation Pumps Equipment For Irrigation Available In Tennessee
-
PremiumManufactured by Fiberscope.net by Medit Inc.based in CANADA
When it comes to Artificial Insemination in sheep, due to cross-pleating inside the cervix, which makes it narrow and hard to navigate, normal trans-cervical methods cannot be used to deposit a sufficient amount of sperm. Therefore, the preferred method is Laparoscopic artificial insemination (LAI). This technique bypasses the cervix, by going through the abdomen, to deposit sperm directly into ...
-
Manufactured by MedTec Applications, Inc.based in USA
Designed for rinsing the abdominal cavity in conjunction with the use of wall suction during pelviscopy and laparoscopy. Rinsing pressure is continuously adjustable from 0 to 750 mmHg. Supplied with CO2 Yoke and high pressure tubing. ...
-
Manufactured by RM Irrigation Equipment S.p.Abased in ITALY
The “Xjm” range encompasses five models featuring different operating characteristics: 600, 800, 900, Major and Magnum. All machines have inherited the technical features of their „sisters“ besides ...
-
Manufactured by Water Services Inc.based in USA
1 HP/ 0.75W, 110/240 Volts, Phase: 1, 1" ...
-
Manufactured by Smith Irrigation Equipmentbased in USA
Irrigation water pressure boosting pumps can be mounted on traveling sprinklers or installed between the water source and the sprinkler. Booster pumps are used to raise inadequate water pressure to improve performance of a sprinkler. Booster pumps are gasoline powered to retain the portability of the sprinkler. The gas powered booster pumps are available with either a 5.5 H.P. or 9 H.P. re-coil ...
-
Manufactured by Nutricontrol, S. L.based in SPAIN
This equipment is an irrigation controller configurable, therefore It can be adapted to different kind of installations, it is able to control: 16 start programs with 8 valve groups each program. 99 irrigation valves. 9 fertilizers. 9 fertilizer dosing channels with possibility of automatic injectors back wash. 9 irrigation pumps. 27 blowers/agitators. Start/stop control of electric generator. ...
-
Manufactured by Tradewinds Power Corpbased in USA
Our irrigation pump packages use John Deere and Perkins diesel engines. The design reliability benefit comes from more than 25 years supplying the U.S. and international irrigation markets. We offer irrigation pumps designed to meet market specifications and performance criteria. Pumps have manual or programmable controllers with auto start and speed ramp up/down features along with multiple ...
-
Manufactured by Scova Engineering S.p.Abased in ITALY
Motor pump IVECO NEF - ROVATTI single-stage pump with clutch and alternator, complete of engine soundproofed, 1480 liters fuel tank, fixed base studied for OCMIS PIVOT- ...
-
Manufactured by LAP srlbased in ITALY
The VSP systems are created to meet the widest variety of pumping applications based on photovoltaic energy. The combination of VASCO Solar inverters (protection degree IP65 - NEMA 4) with the complete range of stainless steel submersible pumps from 4" to 10", give birth to a solution of absolute quality, unique for its reliability, variety and performance. Whatever the demand for water, there is ...
-
Manufactured by Scova Engineering S.p.Abased in ITALY
Best branded engines and pumps such as IVECO. DEUTZ, JOHN DEERE, PERKINS, ROVATTI. CAPRARI, LAND1NI coupled with flexible joints. Control panel to manage both the engine and the pump. Bended sheet iron trolley with built in tank welded by robots in order to have the best ration between dimension and fuel tank capacity. Removable drawbar and wheels axle shaft, mechanical stabilizers. Water ...
-
Manufactured by AP Machinebouw B.V.based in NETHERLANDS
The hydraulically driven AP irrigation machines are available in various versions. There are 4 models that come with a built-on PTO pump, a built-on motor pump or a hydro-kit. Choosing the proper irrigation machine depends on several factors like the length of the parcels, the desired amount of precipitation per ha. or per hour and the amount and type of water supply. The range consists of the ...
-
Manufactured by Tefen Flow and Dosing Technologies Ltd.based in ISRAEL
Water pressure : 0.2 – 8 bar (2.9 – 120 psi). Flow Rate ; 10 – 3500 l/h (2.65 – 930 ) gal/h. Working temp : 4-40˚ C (39.2-104˚ F). Coupling : ...
-
Manufactured by Euromacchine Srlbased in ITALY
The LAMPO patented multifunctional diesel engine pump unit can be used simultaneously as a generator and pump with the possibility of varying the flow rates and pressures through an inverter. LAMPO Green ensures water drafting from wells with minimum diameters of 180 mm with depths up to 50 m and pumps from 25 to 500 m3/h. Truck-mounted tank frames from 1,000 litres and series Super-silent ...
-
Manufactured by Smart Hydro Power GmbHbased in GERMANY
The SMART Irrigation System consists of an irrigation pump directly powered by a SMART Turbine. In one of our installations, a water velocity of 1.7 m/s results in an average annual generation of 1.1 kW or 36 m³/hour of water pumped. A water pump connected to the river turbine pumps 1,000 m³ for 30% of the costs compared to a diesel generator. In this case, the amortization time of this ...
-
Manufactured by Arili Plastik Sanayii A.S.based in TURKEY
Drip Irrigation is giving the necessary water and soluble nutriments at the time when it is required and amount needed to the root area of the plant as drips in a controlled way. In drip irrigation method, water is given frequently and in low amounts. Irrigation should begin before the earth loses its humidity and enough water for one day or couple days should be given to the plant. By this way, ...
-
Manufactured by A.Y. McDonald Mfg. Co.based in USA
Two stage construction provides pressures to 60 PSI for high pressure applications. Motors are NEMA standard construction, coupled shaft design and available in both single and three-phase. Housing and adapter are cast iron. Impeller of your choice - bronze or plastic. Trouble-free (carbon-ceramic) seal. To order plastic impellers, add 'P' to model number. Example: ...
-
Manufactured by Tefen Flow and Dosing Technologies Ltd.based in ISRAEL
Tefen's MixRite line of water driven proportional dosing pumps, are used to ensure precise additive injection directly into the water or fluid line under various flow rates, feed ratios and different ranges of ...
-
Manufactured by Sistemes Electrònics Progrés S. A.based in SPAIN
The Agrónic 4000 is equipped for the control of irrigation, fertilization, pH, pumping and filter cleaning, with fault detection and possibility of remote data management via PC or mobile phone. Models with 16, 24, 32, 48, 64, 80 and 96 configurable outputs, plus 12 digital sensors in the base. Extensions for reading analog sensors, either by direct connection to the equipment, by means of ...
-
Manufactured by Nutricontrol, S. L.based in SPAIN
Nutrimac 5 is a complete fertirrigation unit to control the irrigation and fertilizer doses. There are three different ranges: Nutrimac 5 Automatic, Nutrimac 5 E/G and Nutrimac 5 ...
-
Manufactured by Water Services Inc.based in USA
3 HP/ 2.2KW, 110- 400 Volts, Phase: 1 or 3, 2" ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you