Irrigation Valves Equipment For Irrigation In Australasia
-
Manufactured by Aquaterr Instruments & Automation, LLCbased in USA
Connects directly to your commercial irrigation controller, and sends programmed radio signals, specially encoded to activate the Aquaterr Receiver to which they are wirelessly ...
-
Manufactured by Baccara Geva (Australia) Pty Ltdbased in AUSTRALIA
Ports size: 3/4″ – 2″ BSPT, Manual override: Plastic, Handle, Body material: ...
-
Manufactured by Tavlit Plastic Ltd.based in ISRAEL
For over 25 years TAVLIT has been supplying high quality drip line valves. Drip Line valves enable quick and easy isolation of drip lines for repair and when the specific line is not ...
-
Manufactured by Aquaterr Instruments & Automation, LLCbased in USA
Valve Actuating Receiver’s (VAR’s) are ideal for both agriculture and turf applications. Whether your system is manual or wired, if you are ready to implement an automated irrigation plan, Aquaterr’s Wireless System may be your best ...
-
Manufactured by Greentronicsbased in CANADA
The RiteHeight Sprayer Boom Height Controller keeps the sprayer booms automatically at a consistent height, eliminating the need for manual height adjustments in hilly terrain, and minimizing the risk of boom contact with the ...
-
Manufactured by Baccara Geva (Australia) Pty Ltdbased in AUSTRALIA
Operating temp: -10° to 60°C, Options: Solar panel, charger, accurate clock, Battery: 9V alkaline battery included, Mounting: Horizontal, vertical, wall mounting. ...
-
Manufactured by Irrometer Company, Inc.based in USA
“AVS" Automatic Vacuum Switches are designed for use on IRROMETER instruments and provide direct switching capabilities according to soil moisture status. Soil water tension readings greater than the moisture set point can activate an irrigation valve solenoid, time clock or warning device. A switch mechanism is mounted on the instrument body and can be field adjusted by hand to the desired ...
-
Manufactured by Irrometer Company, Inc.based in USA
The WaterSwitch works as an add-on device for existing valves or controllers to improve irrigation efficiency based on plant demand. The module will prevent irrigation cycles by signaling the controller’s sensor circuit or interrupting the solenoid power, when the soil moisture status is wetter than the adjustable set point. The kit includes one moisture sensor and has nine moisture set ...
-
Manufactured by Aquaterr Instruments & Automation, LLCbased in USA
Lowest Cost to Automate. The most cost effective, lowest cost-per-valve wireless receiver sets a new price-point for wireless valve automation. The VAR-8/AC is ideal for potted nurseries, greenhouses, or wherever power is available at the ...
-
Manufactured by Westfield Industries - a brand by Ag Growth International Inc.based in CANADA
Side-Mount Drill Fill High capacity 6' Side-Mount Drill Fills. The 11’, 16’ and 21’ models mount quickly to any truck using the included bracket. This model also includes a safety shielded intake, long handled feed control and telescoping 14’ downspout as standard features and is powered by a 4.2 cu. in. hydraulic motor. An optional 12 volt solenoid control valve with ...
-
Manufactured by Mottech Water Solutions LTD.based in ISRAEL
The Piccolo XR is a small sized wireless Remote Terminal Unit that operates as an integral part of the IRRInet system. The Piccolo XR operates up to 4 latched outputs and may receive up to 7 digital inputs (model dependent). The PIU (Piccolo Interface Unit) is connected to the IRRInet Field Unit, and communicates with Piccolo-XR units via its internal two-way low-power radio. The Piccolo XR and ...
-
Manufactured by Williams Engineering (2011) Ltdbased in NEW ZEALAND
The Auto Shutoff Valve has been designed to turn the travelling irrigator off at the end of the paddock to stop the risk of the irrigator over applicating at the end of its ...
-
Manufactured by Wisa Irrigationbased in AUSTRALIA
The WiSA Radio Solenoid Module is most commonly used product for distance communication to irrigation ...
-
Manufactured by Aquaterr Instruments & Automation, LLCbased in USA
Connects directly to your Commercial Irrigation Controller, and sends programmed radio signals, specially encoded to activate the Aquaterr Receiver to which they are wirelessly ...
-
Manufactured by Aquaterr Instruments & Automation, LLCbased in USA
Metal Box mounted Aquaterr Valve Actuating Receivers are ideal for high traffic Municipal and Commercial applications. Whether your current system is manual or wired, if you are ready to implement an automated irrigation plan, Aquaterr’s Wireless System may be your best ...
-
Manufactured by Tavlit Plastic Ltd.based in ISRAEL
For over 25 years TAVLIT has been supplying high quality drip line valves. Drip Line valves enable quick and easy isolation of drip lines for repair and when the specific line is not irrigating. The tape line valves expands the wide range TAVLIT offers with products specifically designed to the growing market of tape drip ...
-
Manufactured by Aquaterr Instruments & Automation, LLCbased in USA
Box mounted Aquaterr Valve Actuating Receivers are ideal for high traffic turf applications, especially where vandalism needs to be discouraged and avoided. Whether your current system is manual or wired, if you are ready to implement an automated irrigation plan, Aquaterr’s Wireless System may be your best ...
-
Manufactured by Greentronicsbased in CANADA
The RiteTilt controller is designed for use on a wide variety of equipment that must be maintained in a level position (zero tilt angle) in order to perform well. Typical applications include root crop and vegetable harvesters, and trenching equipment. Without automatic tilt control, the operator must visually check a gauge or indicator and maintain the correct angle on-the-go. The RiteTilt ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you