Irrigation Equipment In Asia & Middle East
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
In just 5 seconds the WET Sensor checks 3 crucial variables that influence plant growth: water content, temperature and pore water conductivity (ECp), the EC of the water that is available to the ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
EC-probe for soil salinity measurements, standard set for measurements to 1 m ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The DL6 is a dedicated data logger optimised for use with Delta-T soil moisture sensors. It can be used with combinations of ThetaProbes, SM150 Soil Moisture Sensors, SM300 Soil Moisture Sensors and Profile Probes, and also accepts rain gauge and soil temperature probe inputs. Up to 16000 readings can be stored in ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Tensiometer set. Complete standard set for multiple measurements to a depth of 90 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil moisture sensor Thetaprobe ML3. Measuring range 0-50% vol. Accuracy +/- 1%. With 4 pins, length 60 mm, Ø 3.2 mm. Output signal 0-1 Vdc. Inclusive temperature meter range -20...+60 °C, accuracy +/- 0.5 °C over 0...40 °C. Exclusive cable. Warranty 5 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil moisture sensors that measure the moisture tension in the soil are read out with the soil moisture meter Watermark. The measuring principle is similar to that of the gypsum block system. The special sensors however do not dissolve in the soil and have a more consistent distribution of pores so that more accurate measurements are ...
-
PremiumManufactured by Myron L Companybased in USA
The nutrient solution and its management are the foundation of a successful hydroponics system. The function of a hydroponics nutrient solution is to supply the plant roots with water, oxygen and essential mineral elements in soluble form. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Jet-fill tensiometer basically has the same components as the standard tensiometer but is equipped with a reservoir and a refill mechanism. At a push of the button the Jet-fill mechanism instantly injects water from the reservoir into the body of the tensiometer and removes accumulated air. This tensiometer can be provided in different lengths as ...
-
PremiumManufactured by Ecological Laboratories, Inc.based in USA
MICROBE-LIFT/Professional Blend Liquid is a blend of microbes that contain specially formulated strains of bacteria manufactured for use by landscape, irrigation & pond ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The WET Sensor has crucial applications in precision horticulture and soil science research and is usable in both soils and growing substrates. It is exceptional in its ability to measure pore water conductivity (ECp), the EC of the water that is available to the ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The standard tensiometer consists of a clear transparent plastic tube with a ceramic cup at the bottom end and a manometer at the top. The standard tensiometer is delivered in various lengths allowing the execution of simultaneous measurements at various depths in the root zone. For pre-drilling special auger sets can be ...
-
PremiumManufactured by AMS, Inc.based in USA
The AMS Brown Moisture Probe is a modified tile probe used primarily by agricultureal scientists and farmers to survey soil to depths of about 3-ft for the purpose of determining the depth of soil moisture storage following irrigation. The probe offers visual confirmation of soil moisture conditions, and this data is used to help determine crop yield goals, planting decisions, irrigation water ...
-
PremiumManufactured by AMS, Inc.based in USA
The Brown Moisture Probe allows you to determine moisture depth quickly and easily. Agronomists and farmers use it to determine the depth of moisture following irrigation. This 43" Probe has an auger tip and depth markings at 1', 2', and 3' from the tip. The Probe is pushed into the soil using the attached 10" Rubber-Gripped Handle. It will easily penetrate saturated soils, but not dry soils. At ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The EQ3 Equitensiometer uses class leading ThetaProbe technology to avoid the many problems of water-filled tensiometers. It measures water potential (matric potential) in the range 0 to -1000 kPa and provides an accurate loggable output. It is particularly well suited for use in dry ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The WET Kit provides researchers with a powerful portable tool for assessing growing conditions in soils and substrates. The WET Kit measures and displays 3 important variables that influence plant growth: water content, temperature and pore water conductivity (ECp) – the EC of the water available to the plant. The kit comprises a WET Sensor, an HH2 Moisture Meter (readout unit) and a carry ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Set for pF determination with ceramic plates, minimal standard set, (0.1...15 bars of ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The ML3 ThetaKit provides researchers with a portable tool for highly accurate, near instantaneous measurement of moisture levels in soils and substrates. The ThetaKit is easy to use. Simply switch the connected HH2 Moisture Meter on, insert the probe pins fully into the soil, and press the HH2’s “read” button to display the moisture measurement. Readings can then be stored with ...
-
PremiumManufactured by Ecological Laboratories, Inc.based in USA
Contains photosynthetic bacteria which reduces cloudy water by promoting flocculation and settling of organic and inorganic ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
Stomatal aperture is the dominant factor in the diffusion conductance of leaf surfaces, which controls both the water loss from plant leaves and the uptake of CO2 for photosynthesis. Measurements of diffusion conductance are therefore important indicators of plant water status and provide a valuable insight into plant growth and plant adaptation to environmental ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The quick draw tensiometer is a small tensiometer that can easily be moved and, using the auger for pre-drilling, placed into the soil. The small diameter and the super porous ceramic cup and the possibility of pre-setting the tension, allow a measuring period of only a few minutes. After each measurement the tensiometer can be stored in a carrier cylinder in which it is kept humid allowing ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you