Irrigation Equipment In Estonia
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Jet-fill tensiometer basically has the same components as the standard tensiometer but is equipped with a reservoir and a refill mechanism. At a push of the button the Jet-fill mechanism instantly injects water from the reservoir into the body of the tensiometer and removes accumulated air. This tensiometer can be provided in different lengths as ...
-
Manufactured by Mikskaar ASbased in ESTONIA
Extra coarse substrate for potting Mikskaar MXL is a universal potting substrate suitable for potting of a wide range of indoor plants, trees, ornamentals. This mix is suitable for long term cultivation in medium and large pots and containers. The substrate is made of 100% natural, a little decomposed milled peat moss of Estonian origin. Substrate is with excellent water resistance, buffering ...
-
Manufactured by Irtec S.p.A.based in ITALY
Hydraulic lifting device of trolley. Hydraulic rotation of turntable. Hydraulic lifting of drawbar. Telescopic hydraulic feet. 4 Speed gearbox. Power take off. Turbine flanged on the gearbox with built-in by-pass. Flexible connection pipe. Galvanized raingun trolley mounted on variable track wheels. Raingun. Set of nozzles REFLEX raingun from Ø 24 to Ø 32. Set of nozzles EXPLORER ...
-
Manufactured by Irtec S.p.A.based in ITALY
All-in-one irrigators ready to lift water before distributing it. The motor pump mounted on the frame allows water to be lifted directly from canals and, if necessary, it is ready as a booster ...
-
Manufactured by Irtec S.p.A.based in ITALY
All-in-one irrigators ready to lift water before distributing it. The motor pump mounted on the frame allows water to be lifted directly from canals and, if necessary, it is ready as a booster ...
-
Manufactured by Irtec S.p.A.based in ITALY
When the surface to be irrigated becomes important. The application of fluid dynamics comes to the aid of field work. Fully hydraulic system: lifting the trolley, lifting the drawbar, and rotating the ...
-
Manufactured by Irtec S.p.A.based in ITALY
When the surface to be irrigated becomes important. The application of fluid dynamics comes to the aid of field work. Fully hydraulic system: lifting the trolley, lifting the drawbar, and rotating the ...
-
Manufactured by Irtec S.p.A.based in ITALY
Simple and immediate coverage of irrigation needs. Water supply is possible by hose or by canal. Used on rectangular farms, self-propelled booms with central drive ...
-
Manufactured by Irtec S.p.A.based in ITALY
When to irrigate at 360 ° is not a figure of speech. The system designed to irrigate large extensions in complete autonomy. Available in three versions, with water supply from canal, with flattenable hose, or PE pipe. Equipped with a self-propelled boom with central drive impeller and swivel joint for linear and rotary irrigation up to 180°. At the end of the run, the Hippodrome system ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Tensiometer set. Complete standard set for multiple measurements to a depth of 90 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil moisture sensors that measure the moisture tension in the soil are read out with the soil moisture meter Watermark. The measuring principle is similar to that of the gypsum block system. The special sensors however do not dissolve in the soil and have a more consistent distribution of pores so that more accurate measurements are ...
-
PremiumManufactured by AMS, Inc.based in USA
The Brown Moisture Probe allows you to determine moisture depth quickly and easily. Agronomists and farmers use it to determine the depth of moisture following irrigation. This 43" Probe has an auger tip and depth markings at 1', 2', and 3' from the tip. The Probe is pushed into the soil using the attached 10" Rubber-Gripped Handle. It will easily penetrate saturated soils, but not dry soils. At ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Set for pF determination with ceramic plates, minimal standard set, (0.1...15 bars of ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
EC-probe for soil salinity measurements, standard set for measurements to 1 m ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil moisture sensor Thetaprobe ML3. Measuring range 0-50% vol. Accuracy +/- 1%. With 4 pins, length 60 mm, Ø 3.2 mm. Output signal 0-1 Vdc. Inclusive temperature meter range -20...+60 °C, accuracy +/- 0.5 °C over 0...40 °C. Exclusive cable. Warranty 5 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The quick draw tensiometer is a small tensiometer that can easily be moved and, using the auger for pre-drilling, placed into the soil. The small diameter and the super porous ceramic cup and the possibility of pre-setting the tension, allow a measuring period of only a few minutes. After each measurement the tensiometer can be stored in a carrier cylinder in which it is kept humid allowing ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The standard tensiometer consists of a clear transparent plastic tube with a ceramic cup at the bottom end and a manometer at the top. The standard tensiometer is delivered in various lengths allowing the execution of simultaneous measurements at various depths in the root zone. For pre-drilling special auger sets can be ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Also included in our product range is the WET sensor, to measure pore water conductivity and temperature in the top layer of a soil. The measurement values are shown on the display of the hand held meter and can be stored in the memory (including time and sensor location). These data can be read on a ...
-
PremiumManufactured by AMS, Inc.based in USA
The AMS Brown Moisture Probe is a modified tile probe used primarily by agricultureal scientists and farmers to survey soil to depths of about 3-ft for the purpose of determining the depth of soil moisture storage following irrigation. The probe offers visual confirmation of soil moisture conditions, and this data is used to help determine crop yield goals, planting decisions, irrigation water ...
-
Manufactured by Eggersmann GmbHbased in GERMANY
Self-propelled windrow turner for sewage sludge, organic and agricultural waste. Turning capacity of up to 3,000 m³ per hour dependent on material. Low fuel consumption. Comprehensive equipment as standard. Facilitates process improvement. Designed for ergonomic ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you