Irrigation Equipment In Greece
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The quick draw tensiometer is a small tensiometer that can easily be moved and, using the auger for pre-drilling, placed into the soil. The small diameter and the super porous ceramic cup and the possibility of pre-setting the tension, allow a measuring period of only a few minutes. After each measurement the tensiometer can be stored in a carrier cylinder in which it is kept humid allowing ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Jet-fill tensiometer basically has the same components as the standard tensiometer but is equipped with a reservoir and a refill mechanism. At a push of the button the Jet-fill mechanism instantly injects water from the reservoir into the body of the tensiometer and removes accumulated air. This tensiometer can be provided in different lengths as ...
-
PremiumManufactured by Myron L Companybased in USA
The nutrient solution and its management are the foundation of a successful hydroponics system. The function of a hydroponics nutrient solution is to supply the plant roots with water, oxygen and essential mineral elements in soluble form. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil moisture sensor Thetaprobe ML3. Measuring range 0-50% vol. Accuracy +/- 1%. With 4 pins, length 60 mm, Ø 3.2 mm. Output signal 0-1 Vdc. Inclusive temperature meter range -20...+60 °C, accuracy +/- 0.5 °C over 0...40 °C. Exclusive cable. Warranty 5 ...
-
Manufactured by SOL Spabased in ITALY
MAKING WATER DRINKABLE AND RE-CARBONATING IT: the problem of the quality of drinkable water is constantly being brought to everybody's attention. The systems and products for treating water must comply with precise conditions regarding non-toxicity and naturalness. Oxygen used directly as an oxidising agent or indirectly for the production of ozone in the plants that make water drinkable meet all ...
-
Manufactured by EVDOS SAbased in GREECE
Irrigation hydrants are constructed with or without antifrost protection and are the same type as them which are used in all greek networks and in many europian countries.Connection flanges : DIN 2501.Work pressure : 16 bar.Test pressure : 25 bar.Coating : Powder ...
-
Manufactured by Palaplastbased in GREECE
Self-Compensating and self-cleaning dripper with No-Drain system. Placed directly onto ΡΕ pipe 12 – 32 mm or at the end of pipe 6mm. The outlet of the dripper can be connected with micro-tube dripper hose 3,2mm or distribution manifold. Dripper opens and closes in pressure range: 0,1 at ...
-
Manufactured by AGROinventbased in GREECE
Hydria 8++ Touch is not an ordinary fertigation system, but a platform for the complete automation of the fertigation process, carrying endless features and capabilities. These concern its practically infinite irrigation programs and fertigation recipes, as well as its numerous peripheral automations and rational irrigation management. Ease of interaction between the user and the machine is of ...
-
Manufactured by Agrotis S.A.based in GREECE
Irrigation system, the well-done manufacture, the multiple patents and the qualitative control attribute to the irrigator's unique fuctionality, efficiency and resistance in ...
-
Manufactured by Palaplastbased in GREECE
Punch – 3 & 4mm / Cutter – up to 20mm / Inserter. Code: 4065/0000. Packing (pcs/cart): ...
-
Manufactured by Panagrotiki S.A.based in GREECE
The combination mulching machine 'Thomas' with plastic is responsible for the drafting and earthing-up of plastic & paper films and the transplanting of the plants with conical and cylindrical ball with maximum diameter 7 cm. The specific machine stands-out from the rest because has 4 rotating concave discs which allow to open easily the ridges and to place the plastic in the ground. All ...
-
Manufactured by AGROinventbased in GREECE
Hydria 4+ Touch is a revolutionary fertigation system for greenhouses that require up to four nutrient plus one acid stock solutions. Hydria 4+ Touch carries all the basic features of the higher Hydria Series (i.e. Hydria 5+ Touch and Hydria 8++ Touch) and the same user-friendly menu in English, accessible through a 4.7-inch (or 7-inch upon request) colour touchscreen. A fertiliser mixing tank ...
-
Manufactured by AGROinventbased in GREECE
Hydria 5+ Touch is a fertigation system designed for greenhouses with high irrigation demands. The irrigation capacity of Hydria 5+ Touch is identical to the one of Hydria 8++ Touch with only difference being its ability to manage five nutrient plus one acid stock solutions, as opposed to eight and two respectively of Hydria8++ Touch. The dual (safety) electrical conductivity (EC) and acidity ...
-
Manufactured by Coolmerchantbased in GREECE
COOLMERCHANT's innovative GREENHOUSE WATERING SYSTEM is the most essential equipment for every modern greenhouse. Greenhouses are today a rapidly developing field with ever-increasing production requirements. The greenhouse environment requires ideal humidity conditions, in line with the product being cultivated. ...
-
Manufactured by AGROinventbased in GREECE
The all-new fertigation system Hydria 2+ is a revolutionary product that combines high quality with low cost.Hydria 2+ features three digital inputs for external selection of any of the three fertigation recipes that the machine is able to store and execute. This system offers an economical and practical solution for agricultural units, in which an irrigation controller is already installed and ...
-
Manufactured by AGROinventbased in GREECE
The all-new fertigation system Hydria 4+ is an economical option that fully covers the needs of small greenhouses. At the same time, its reasonable price makes it ideal even for field crops and trees. The Hydria 4+ series has recently been upgraded, as a result of the great success of its predecessor in regions with numerous but relatively small greenhouses, as well as of the importance of the ...
-
Manufactured by Palaplastbased in GREECE
Spinkler ½″ with 1 nozzle. Full circle & adjustable radius. Working pressure 1,5 – 3,0 ...
-
Manufactured by Agromasters Ltdbased in GREECE
The Herringbone – Rapid Exit milking parlor is addressed to larger dairy farms. This type of milking system is designed to ensure comfortable animal positioning, high throughput & quick exit of the animals after the end of milking process . The elevation of the stall is achieved via the use of pneumatic cylinders.Animals are not pressed ( inside the parlour ) but only from the other ...
-
Manufactured by Palaplastbased in GREECE
For inserting connectors to Φ7 pipes. Code: 4066/0704. Packing (pcs/cart): ...
-
Manufactured by Geohellas S.A.based in GREECE
AGLEV SI 200 is a porous granular clay used to enhance the performance of planting ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you