Irrigation Equipment In Hungary
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil moisture sensors that measure the moisture tension in the soil are read out with the soil moisture meter Watermark. The measuring principle is similar to that of the gypsum block system. The special sensors however do not dissolve in the soil and have a more consistent distribution of pores so that more accurate measurements are ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
EC-probe for soil salinity measurements, standard set for measurements to 1 m ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The standard tensiometer consists of a clear transparent plastic tube with a ceramic cup at the bottom end and a manometer at the top. The standard tensiometer is delivered in various lengths allowing the execution of simultaneous measurements at various depths in the root zone. For pre-drilling special auger sets can be ...
-
Manufactured by Poliext Kft.based in HUNGARY
Safe and fast way of connecting drip irrigation setup using fix grip ring. Quick joint fittings ensure additional protection even on uneven ground. They are specifically used for low-pressure connections. The maximum working pressure is 6 bar. A wide range of quick joints is available. From now on, besides 16 mm, a diameter of 20 mm is also ...
-
Manufactured by Poliext Kft.based in HUNGARY
Produced from a softer material. High impact resistance and weathering, make them ideal for the most demanding application. Unlike steel, PE Pipes can easily bypass obstacles in their path and can withstand movements in the ground around them. The field of use is turf irrigation, open-field irrigation, ...
-
Manufactured by Poliext Kft.based in HUNGARY
Tape fittings secure a safe and fast way of connecting drip tapes. The increased middle part ensures easy handling and assembling and the long grip body helps the tape to be pulled on the fitting easily. The nut gives additional pressure ...
-
Manufactured by Poliext Kft.based in HUNGARY
Tape fittings with the ring are for fast and simple connection, ideal for use in irrigation systems for connecting drip tapes. Increased middle part guarantees easy handling and assembling, and a long grip ring helps to pull the tape easily on the fitting. A simple solution for every situation, provided by a wide product ...
-
Manufactured by SOL Spabased in ITALY
MAKING WATER DRINKABLE AND RE-CARBONATING IT: the problem of the quality of drinkable water is constantly being brought to everybody's attention. The systems and products for treating water must comply with precise conditions regarding non-toxicity and naturalness. Oxygen used directly as an oxidising agent or indirectly for the production of ozone in the plants that make water drinkable meet all ...
-
Manufactured by Poliext Kft.based in HUNGARY
Irrigation pipes, produced from low-density polyethylene raw material (LDPE) are used in a wide range of applications, including sprinkler & drip irrigation and agricultural & landscape irrigation systems. Thanks to their high resistance to mechanical stress, they apply to all mechanical fittings, especially for a connector with inserts (PP compression fittings, clamp saddles, dripline ...
-
Manufactured by Doppstadtbased in GERMANY
Sugar beets carry high dry matter yields. They provide higher methane yields per acre than any other crop. Their good fermentation characteristics are of great importance for the production of biogas. The excessive amount of soil residue adhering to the outside of the beets, as a result of harvesting, has to be removed in a suitable cleaning/washing ...
-
Manufactured by Nitrogenmuvek Zrt.based in HUNGARY
Arable crops, vegetables, grapes, fruits and ornamental plants. It can be used for nitrogen deficiency. Its regular use ensures healthy and vigorous growth in plants and their balanced nutrient supply. It can be used for foliar fertilisation 2 to 3 times during the growing season, in a 1-2 V/V% concentration (5-10 l/ha spread in 500-1000 l/ha water). For small farmers 1 to 2 dl agent/10 l ...
-
Manufactured by Nitrogenmuvek Zrt.based in HUNGARY
Arable crops, vegetables, grapes, fruits and ornamental plants. It can be used for phosphorus and potassium deficiency. Its regular use ensures healthy and vigorous growth in plants and their balanced nutrient supply. It can be used for foliar fertilisation 2 to 3 times during the growing season, in a 1-2 V/V% concentration (5-10 l/ha spread in 500-1000 l/ha water). For small farmers 1 to 2 dl ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Jet-fill tensiometer basically has the same components as the standard tensiometer but is equipped with a reservoir and a refill mechanism. At a push of the button the Jet-fill mechanism instantly injects water from the reservoir into the body of the tensiometer and removes accumulated air. This tensiometer can be provided in different lengths as ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Also included in our product range is the WET sensor, to measure pore water conductivity and temperature in the top layer of a soil. The measurement values are shown on the display of the hand held meter and can be stored in the memory (including time and sensor location). These data can be read on a ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Tensiometer set. Complete standard set for multiple measurements to a depth of 90 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The quick draw tensiometer is a small tensiometer that can easily be moved and, using the auger for pre-drilling, placed into the soil. The small diameter and the super porous ceramic cup and the possibility of pre-setting the tension, allow a measuring period of only a few minutes. After each measurement the tensiometer can be stored in a carrier cylinder in which it is kept humid allowing ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Set for pF determination with ceramic plates, minimal standard set, (0.1...15 bars of ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil moisture sensor Thetaprobe ML3. Measuring range 0-50% vol. Accuracy +/- 1%. With 4 pins, length 60 mm, Ø 3.2 mm. Output signal 0-1 Vdc. Inclusive temperature meter range -20...+60 °C, accuracy +/- 0.5 °C over 0...40 °C. Exclusive cable. Warranty 5 ...
-
PremiumManufactured by Myron L Companybased in USA
The nutrient solution and its management are the foundation of a successful hydroponics system. The function of a hydroponics nutrient solution is to supply the plant roots with water, oxygen and essential mineral elements in soluble form. ...
-
PremiumManufactured by AMS, Inc.based in USA
The AMS Brown Moisture Probe is a modified tile probe used primarily by agricultureal scientists and farmers to survey soil to depths of about 3-ft for the purpose of determining the depth of soil moisture storage following irrigation. The probe offers visual confirmation of soil moisture conditions, and this data is used to help determine crop yield goals, planting decisions, irrigation water ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you