Irrigation Equipment In Singapore
-
Manufactured by Vermeerbased in USA
The heavy-duty, center pivot TM1200 trailed mower cuts an impressive 15' 6'/4.7 m, but folds neatly in half for transporting to the next field. Cutterbars are staggered and overlapped for complete cutting action down the middle. To lower maintenance needs, each of the 12 discs is self-contained with its own set of gears, bearings and lubricants – and the gears stay in the grease, even when ...
-
Manufactured by Water Services Inc.based in USA
3 HP/ 2.2KW, 220- 400 Volts, Phase: 3, 2" ...
-
Manufactured by Vermeerbased in USA
Built for high maneuverability and easy operation, the LM42 tackles tough jobs with a powerful 42 hp/31 kW Deutz engine. This workhorse includes plow centering springs, a servo-controlled ground drive pump and safety features such as insulated controls and an operator-presence system. The LM42 also boasts an extremely narrow profile that fits through areas as small as 36'/91.4 cm, depending on ...
-
Manufactured by Tyco Fire Protection Productsbased in USA
Performance-based fire sprinkler system specifically engineered to address highly challenging storage fire ...
-
Manufactured by Water Services Inc.based in USA
7.5 HP/ 5.5KW, 220- 400 Volts, Phase: 3, 3" ...
-
Manufactured by Water Services Inc.based in USA
5 HP/ 3.7KW, 110- 400 Volts, Phase: 1 or 3, 3" Discharge. ...
-
PremiumManufactured by Myron L Companybased in USA
The nutrient solution and its management are the foundation of a successful hydroponics system. The function of a hydroponics nutrient solution is to supply the plant roots with water, oxygen and essential mineral elements in soluble form. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil moisture sensor Thetaprobe ML3. Measuring range 0-50% vol. Accuracy +/- 1%. With 4 pins, length 60 mm, Ø 3.2 mm. Output signal 0-1 Vdc. Inclusive temperature meter range -20...+60 °C, accuracy +/- 0.5 °C over 0...40 °C. Exclusive cable. Warranty 5 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The quick draw tensiometer is a small tensiometer that can easily be moved and, using the auger for pre-drilling, placed into the soil. The small diameter and the super porous ceramic cup and the possibility of pre-setting the tension, allow a measuring period of only a few minutes. After each measurement the tensiometer can be stored in a carrier cylinder in which it is kept humid allowing ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Jet-fill tensiometer basically has the same components as the standard tensiometer but is equipped with a reservoir and a refill mechanism. At a push of the button the Jet-fill mechanism instantly injects water from the reservoir into the body of the tensiometer and removes accumulated air. This tensiometer can be provided in different lengths as ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil moisture sensors that measure the moisture tension in the soil are read out with the soil moisture meter Watermark. The measuring principle is similar to that of the gypsum block system. The special sensors however do not dissolve in the soil and have a more consistent distribution of pores so that more accurate measurements are ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Also included in our product range is the WET sensor, to measure pore water conductivity and temperature in the top layer of a soil. The measurement values are shown on the display of the hand held meter and can be stored in the memory (including time and sensor location). These data can be read on a ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The standard tensiometer consists of a clear transparent plastic tube with a ceramic cup at the bottom end and a manometer at the top. The standard tensiometer is delivered in various lengths allowing the execution of simultaneous measurements at various depths in the root zone. For pre-drilling special auger sets can be ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
EC-probe for soil salinity measurements, standard set for measurements to 1 m ...
-
Manufactured by Sistema AZUD, S.A.based in SPAIN
1.- Straight labyrinth pick. 2.- 70º labyrinth pick. 3.- Microtube pick (hydroponics). 4.- Microtube offtake connector. 5.- Extendable multi-outlet ...
-
Manufactured by Aquaterr Instruments & Automation, LLCbased in USA
Connects directly to your commercial irrigation controller, and sends programmed radio signals, specially encoded to activate the Aquaterr Receiver to which they are wirelessly ...
-
Manufactured by Sistema AZUD, S.A.based in SPAIN
The fertigation is the simultaneous, controlled and localized application of water and fertilizers through the irrigation system. The aim of fertigation is to keep the availability of water and nutrients in the optimum level to obtain the maximum output in the available environmental conditions. The base of AZUD QGROW fertigation autonomous system is its injector, based on the “venture ...
-
Manufactured by Aquaterr Instruments & Automation, LLCbased in USA
The EC-300 portable soil probe combines Moisture, Temperature and Salinity measurements in one device, displaying instant measurements of each category, accurately and instantly. Allows the tracking of salinity of water entering and leaving the area, and determining the salt accumulation in the soil root ...
-
Manufactured by Dynamax Incbased in USA
The Dynagage Flow32-1K Sap Flow system and Dynagage sensors have been servicing research plant scientists throughout the world for over 10 years. The Flow32-1K software makes working with Flow32-1K sap flow system easier than ever before with built-in algorithms for efficient and faster data analysis. New powerful functions include auto-zero and sensor status built into the datalogger program. ...
-
Manufactured by A.A.S. Advanced Automation Systems Ltd.based in CYPRUS
Drip irrigation production line for the production of cylindrical, thick wall driplines, with the integration of A.A.S. Triton PC or Turbo Compact cylindrical emitters. Production speed up to 120 meters per minute and 500 emitters per minute inserting ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you