Irrigation Equipment Near Congo, Democratic Republic Of The
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil moisture sensor Thetaprobe ML3. Measuring range 0-50% vol. Accuracy +/- 1%. With 4 pins, length 60 mm, Ø 3.2 mm. Output signal 0-1 Vdc. Inclusive temperature meter range -20...+60 °C, accuracy +/- 0.5 °C over 0...40 °C. Exclusive cable. Warranty 5 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The quick draw tensiometer is a small tensiometer that can easily be moved and, using the auger for pre-drilling, placed into the soil. The small diameter and the super porous ceramic cup and the possibility of pre-setting the tension, allow a measuring period of only a few minutes. After each measurement the tensiometer can be stored in a carrier cylinder in which it is kept humid allowing ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Also included in our product range is the WET sensor, to measure pore water conductivity and temperature in the top layer of a soil. The measurement values are shown on the display of the hand held meter and can be stored in the memory (including time and sensor location). These data can be read on a ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil moisture sensors that measure the moisture tension in the soil are read out with the soil moisture meter Watermark. The measuring principle is similar to that of the gypsum block system. The special sensors however do not dissolve in the soil and have a more consistent distribution of pores so that more accurate measurements are ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The standard tensiometer consists of a clear transparent plastic tube with a ceramic cup at the bottom end and a manometer at the top. The standard tensiometer is delivered in various lengths allowing the execution of simultaneous measurements at various depths in the root zone. For pre-drilling special auger sets can be ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Set for pF determination with ceramic plates, minimal standard set, (0.1...15 bars of ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Tensiometer set. Complete standard set for multiple measurements to a depth of 90 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Jet-fill tensiometer basically has the same components as the standard tensiometer but is equipped with a reservoir and a refill mechanism. At a push of the button the Jet-fill mechanism instantly injects water from the reservoir into the body of the tensiometer and removes accumulated air. This tensiometer can be provided in different lengths as ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
EC-probe for soil salinity measurements, standard set for measurements to 1 m ...
-
Manufactured by Land Pride - Great Plains Manufacturingbased in USA
The APS15 Series All Purpose Seeders are excellent combination planting and cultivation tools for golf courses, school systems, municipalities, rental yards, construction companies, sports fields, and college campuses. Their narrower widths make them effective in seeding applications on residential lots, grassy medians, or rights-of-way adjacent to sidewalks, community parks, sporting facilities, ...
-
Manufactured by Land Pride - Great Plains Manufacturingbased in USA
The PFS Series pendulum-type broadcast spreaders are capable of spreading seed, top dressings, prilled/granular fertilizer, lime, and iron at delivery rates ranging from 44 to 890 lbs. per acre with a spreading width of 20' to 46'. Optional spouts are available for narrow spreading, vineyard spreading between rows, and vineyards/orchards spreading on the rows only. An optional internally mounted ...
-
Manufactured by Rhino - a registered trademark of the Alamo Group Inc.based in USA
Make short work of big turf mowing jobs with a Rhino Turf Flex finishing mower! Available in widths of 15’, and 17’, the TX series fits a wide range of applications. Three independently floating decks with caster wheels include baffling for an even distribution of cut material out of the rear discharge area and an outstanding mowing performance on uneven terrain. Mowing height can be ...
-
Manufactured by Flexxifinger QD Industries Inc.based in CANADA
The FlexxiFloat™ crop lifter series have a spring-pivot which allows the lifter to follow the fluctuations of the ground, making it ideal for uneven ground conditions. The FlexxiFloat™ system is available with two rail options: the standard rail and the high-pivot rail. The standard rail is generally used with a rigid header, while the high-pivot rail is used with a flex header, with ...
-
Manufactured by Contec Professional, Inc.based in USA
Sporicidin Mold & Mildew Stain Remover is formulated specifically for water damage restoration and mold remediation projects where mold, mildew and other microbial growth have impacted building materials. Sporicidin® Mold & Mildew Stain Remover utilizes special surfactants and 7.5% hydrogen peroxide to aggressively remove tough biological stains from porous, semi-porous, and ...
-
Manufactured by Flexxifinger QD Industries Inc.based in CANADA
The FlexxiFloat™ crop lifter series have a spring-pivot which allows the lifter to follow the fluctuations of the ground, making it ideal for uneven ground conditions. The FlexxiFloat™ system is available with two rail options: the standard rail and the high-pivot rail. The standard rail is generally used with a rigid header, while the high-pivot rail is used with a flex header, ...
-
Manufactured by Edwards Equipment Companybased in USA
The Edwards Model DT5420 Dyna Trim is a hydraulic driven, mid mounted, low profile mower designed for trimming around trees, posts, sprinkler risers, or other obstacles. The mid mount position permits combining the Dyna Trim with any three point mounted or trailing mower of sufficient width to overlap the mowed area of the Dyna Trim. The 31 inch blade cuts 2 inches inside the outer protective ...
-
Manufactured by Bush Hog - a member of the Alamo Groupbased in USA
The Bush Hog line of Tri-Deck Finishing Mowers are perfect wherever a well-groomed cut is needed. With available mowing widths of 11, 15 and 17-feet, there is certain to be a size to fit your needs. Power requirements start at only 30 HP for the TD1100 and range up to 45 HP for the TD1700. Chances are you already have a tractor that is compatible with at least one of these mowers. The entire TD ...
-
Manufactured by Bush Hog - a member of the Alamo Groupbased in USA
The rotary cutter for those hard to reach places. Bush Hog’s SM60 is your ideal choice for mowing and maintaining rights of way, drainage ditches, lake dams, embankments and sloping terrain. Available in either 540 or 1,000 RPM models, the SM60 features a 5-feet cutting width, and it attaches to your tractor with a Category ll standard or Category ll & lll quick hitch. Expand your ...
-
Manufactured by Edwards Equipment Companybased in USA
The Model BS8310 Brush Spider is an ideal companion implement for the Edwards Front 3-Point Hitch. The Brush Spider is designed for sweeping leaves, pruning's and other debris from the tree row. The unit combines with weed sprayers, shredders and tillage tools for efficient single pass operation. When used with a mid-mounted spray boom, the clean sweeping allows herbicides to be sprayed directly ...
-
Manufactured by Charter Machine Company (CMC)based in USA
Like our standard Tower Press, the Regent models are equipped with 1-piece solid pillow block bearing housings, self-aligning double row spherical bearings, with a quadruple lip seal. The bearing housings are machined in-house for total quality control and coated with a 2-part epoxy base primer with 4 mil thickness and 2 finish coats of 2-part epoxy at 4 mil per coat dry film ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you