Irrigation Equipment Near Slovakia
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil moisture sensor Thetaprobe ML3. Measuring range 0-50% vol. Accuracy +/- 1%. With 4 pins, length 60 mm, Ø 3.2 mm. Output signal 0-1 Vdc. Inclusive temperature meter range -20...+60 °C, accuracy +/- 0.5 °C over 0...40 °C. Exclusive cable. Warranty 5 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The quick draw tensiometer is a small tensiometer that can easily be moved and, using the auger for pre-drilling, placed into the soil. The small diameter and the super porous ceramic cup and the possibility of pre-setting the tension, allow a measuring period of only a few minutes. After each measurement the tensiometer can be stored in a carrier cylinder in which it is kept humid allowing ...
-
Manufactured by Samson Agro A/Sbased in GERMANY
The slurry tanker can be adjusted according to individual needs, because SAMSON’s full product line includes a series of accessories and extra equipment. SAMSON manufactures different Drip Hose Systems with a working width of 12-30m, injectors for grain and grass or black soil. This ensures a product with a perfect cooperation between the tanker and the tools, as tanker, tools, and computer ...
-
Manufactured by Samson Agro A/Sbased in GERMANY
The slurry tanker can be adjusted according to individual needs, because SAMSON’s full product line includes a series of accessories and extra equipment. SAMSON manufactures different drip hose systems with a working width of 12-30 m, injectors for grain and grass or black soil. This ensures a product with a perfect cooperation between the tanker and the tools, as tanker, tools, and ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Also included in our product range is the WET sensor, to measure pore water conductivity and temperature in the top layer of a soil. The measurement values are shown on the display of the hand held meter and can be stored in the memory (including time and sensor location). These data can be read on a ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil moisture sensors that measure the moisture tension in the soil are read out with the soil moisture meter Watermark. The measuring principle is similar to that of the gypsum block system. The special sensors however do not dissolve in the soil and have a more consistent distribution of pores so that more accurate measurements are ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The standard tensiometer consists of a clear transparent plastic tube with a ceramic cup at the bottom end and a manometer at the top. The standard tensiometer is delivered in various lengths allowing the execution of simultaneous measurements at various depths in the root zone. For pre-drilling special auger sets can be ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Set for pF determination with ceramic plates, minimal standard set, (0.1...15 bars of ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Tensiometer set. Complete standard set for multiple measurements to a depth of 90 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Jet-fill tensiometer basically has the same components as the standard tensiometer but is equipped with a reservoir and a refill mechanism. At a push of the button the Jet-fill mechanism instantly injects water from the reservoir into the body of the tensiometer and removes accumulated air. This tensiometer can be provided in different lengths as ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
EC-probe for soil salinity measurements, standard set for measurements to 1 m ...
-
PremiumManufactured by AMS, Inc.based in USA
The Brown Moisture Probe allows you to determine moisture depth quickly and easily. Agronomists and farmers use it to determine the depth of moisture following irrigation. This 43" Probe has an auger tip and depth markings at 1', 2', and 3' from the tip. The Probe is pushed into the soil using the attached 10" Rubber-Gripped Handle. It will easily penetrate saturated soils, but not dry soils. At ...
-
PremiumManufactured by AMS, Inc.based in USA
The AMS Brown Moisture Probe is a modified tile probe used primarily by agricultureal scientists and farmers to survey soil to depths of about 3-ft for the purpose of determining the depth of soil moisture storage following irrigation. The probe offers visual confirmation of soil moisture conditions, and this data is used to help determine crop yield goals, planting decisions, irrigation water ...
-
Manufactured by BMGreenishbased in POLAND
The mini cultivation column is 84 cm high and holds 20 lettuces and herbs. Together with the column, we provide an irrigation and lighting system. You can order a column tailored to your needs, please contact us. ...
-
Manufactured by BMGreenishbased in POLAND
We offer you the most modern and global trend, the cultivation column. The standard column is 164 cm and holds 40 places for lettuce, herbs or other plants. Together with the column, we provide an irrigation and lighting system. ...
-
Manufactured by BMGreenishbased in POLAND
The prototype container measures 6 x 2 x 2 m (length, width, height). Vertical cultivation system in containers, where plants grow on racks made of stainless steel. Compared to their popular plastic counterparts, steel frames are more expensive, but almost “eternal” in use. Can a container contribute to the health food goals that are affordable for all? Answer: Yes, let’s ...
-
Manufactured by SOL Spabased in ITALY
MAKING WATER DRINKABLE AND RE-CARBONATING IT: the problem of the quality of drinkable water is constantly being brought to everybody's attention. The systems and products for treating water must comply with precise conditions regarding non-toxicity and naturalness. Oxygen used directly as an oxidising agent or indirectly for the production of ozone in the plants that make water drinkable meet all ...
-
Manufactured by Doppstadtbased in GERMANY
Sugar beets carry high dry matter yields. They provide higher methane yields per acre than any other crop. Their good fermentation characteristics are of great importance for the production of biogas. The excessive amount of soil residue adhering to the outside of the beets, as a result of harvesting, has to be removed in a suitable cleaning/washing ...
-
by MeteoTrackbased in POLAND
Now with MeteoTrack, you will be able to generate maps of your fields with soil productivity zones marked. This is an invaluable tool for analyzing and improving soil ...
-
by MeteoTrackbased in POLAND
With historical reports in Meteotrack Agro, you can better understand and predict weather changes in your region. You will have access to data on temperature, precipitation, humidity and other weather parameters from the past. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you