Beef Cattle Handling Equipment For Livestock
-
Manufactured by Fesma Alu OÜbased in ESTONIA
FK2 – automatically fixing front, low sheet metal sides and sliding doors in the back. Can be (or is) equipped with an anti-reverse movement ...
-
Manufactured by Deesing Livestock Handling Systemsbased in USA
Cattle Corral with curved single-file chute (race) and round crowd pen. The fence posts are all 2-7/8-ini' (7.30cm) O.D. used oil field pipe. In the areas with solid fence, the maximum distance between the fence posts is 4-feet (1.2m). Space posts no more than 8-feet (2.5m) apart in areas of the corral where the fence is not solid. The raised concrete platform on the inside radius of the single ...
-
Manufactured by Deesing Livestock Handling Systemsbased in USA
A curved cattle handling system works on the principle that cattle always prefer to return to where they came from. Cattle in the wide curved lane on the right side of the photo move willingly towards the crowd pen in the center. From the crowd pen cattle then move into the single file chute on the left side of the photo towards the squeeze (crush) chute. Off the center of the crowd pen is both a ...
-
Manufactured by Condon Engineering Ltdbased in IRELAND
Condon Engineering manufacture a wide range of gates and panels to suit all housing and handling requirements. These products are designed and manufactured to comfortably withstand the largest pressures from all animals. Our range is in split into 2 categories, 4 Bar and 5 Bar. The overall height of both types are the same (1150mm), but the spacing is different. The 4 Bars are spaced at 300mm ...
-
Manufactured by Penderfeed Livestock Equipmentbased in UNITED KINGDOM
Heavy duty neck yoke. This crush is designed for larger breeds and is 900mm ...
-
Manufactured by Fesma Alu OÜbased in ESTONIA
FK3-automatically fixing front, higher sheet metal sides, 4 openable hatches on the sides, anti-reverse movement system, and sliding doors in the back. ...
-
Manufactured by Fesma Alu OÜbased in ESTONIA
FK1- sliding gates in the front and back, higher or lower sheet metal sides. Can be (or is) equipped with an anti-reverse movement ...
-
Manufactured by Deesing Livestock Handling Systemsbased in USA
Curved Cattle Handling System on a cow-calf operation in Wisconsin, USA. Waseda Farms is an organic beef farm located in Door County. The squeeze chute is inside the covered work area. Visit wasedafarms.com for more information on this ...
-
Manufactured by Deesing Livestock Handling Systemsbased in USA
This system was built by Mark Deesing, Grandin Livestock Handling. Systems, Inc., and is used as a model for contractors, and ranch owners to visit. It was custom designed to fit the site and adjacent to a calving barn. Cattle load out by moving through the system then onto a stock trailer chute at the end of the straight ...
-
Manufactured by Morris Livestock Handling Equipmentbased in UNITED KINGDOM
Designed at the request of our customers!! These systems are all built to order ~ bespoke for each customer. We have really taken time over the design of our Mobile Cattle Handling System. While the systems are, of course, extremely well built and robust, it is the thoughtful little details that set us apart from ...
-
Manufactured by Morris Livestock Handling Equipmentbased in UNITED KINGDOM
Don't be deceived by our most basic crush - it's the one we use with our own cattle. A simple yet sturdy crush more than capable of handling cattle. Standard Beef Crush has a single wide opening door on each side. The single height adjustable clipping bar is interchangeable between sides and prevents the animal from stepping out of the crush sideways when the side door is ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you