Cattle Handling Equipment For Livestock In Oklahoma
-
Manufactured by Trojan Livestock Equipment Co., Incbased in USA
The model 300 hydraulic chute is a smaller model built to handle cattle up to 1,200 lbs. This type of model is ideal for feedlot, stocker operations and other calf ...
-
Manufactured by ACME Environmental, Inc.based in USA
4" Diameter Flotation. 4" Skirt Depth. 1/4" Galvanized Chain Ballast. Aluminum quick latch couplers with floats and stainless steel locking pins. Aluminum tow bridles to match up with the ends on the total boom. Top tension cable available on ...
-
Manufactured by GoBob Pipe & Steel Salesbased in USA
The Cattle Flow Adjustable Double/Single Alley Combo cattle alley is constructed from all new schedule 40 pipe so it is heavy and built to last. This is the most versatile alley on the market. It consists of a 20 foot long double lane adjustable alley that transitions down to an approximately 34 inch wide by 10 foot long single adjustable alley (overall length is approximately 37 feet). Also ...
-
Manufactured by W-W Manufacturingbased in USA
Start with a basic 310 (10 ft. wide) or 312 (12 ft. wide) E-Z-Duz-It System and customize your system by adding gates and panels to meet your sorting, holding and pen size requirements. All Corral Gates and Panels in the E-Z-Duz-It livestock handling system are constructed from 2″ x 14 gauge high tensile steel tubing with 50,000 P.S.I. yield strength. All gates mount on gate frames with ...
-
Manufactured by GoBob Pipe & Steel Salesbased in USA
Dual Purpose cattle loading chute allows you to load semi's or stock trailers from one location by simply changing the position of the loading ...
-
Manufactured by Flying W Livestockbased in USA
Alleys Tubs: 2 3/8 Pipe; 3" Channel Iron, Catwalks. Flying W Half Circle Alleys and Crowding Pens are designed with the cattleman in mind. The curved unit works cattle faster and with less effort and less stress on cattle than ever before. The standard unit is set in a 25 foot by 35 foot area and is designed for a 4 inch concrete floor. The system is constructed of 10 gauge steel and 1 ½ ...
-
Manufactured by W-W Manufacturingbased in USA
The biggest chute on the market designed to work the largest breeds in the beef industry. Nylon bushings on bottom of headgate and tailgate. Hydraulic adjustment of lower side. Headgate extension. Emergency side ...
-
Manufactured by Flying W Livestockbased in USA
Flying W Half Circle Alleys and Crowding Pens are designed with the cattleman in mind. The curved unit works cattle faster and with less effort and less stress on cattle than ever before. The standard unit is set in a 25 foot by 35 foot area and is designed for a 4 inch concrete floor. The system is constructed of 10 gauge steel and 1 ½ inch square tubing. Cattle are gathered in a 10 foot ...
-
Manufactured by Barrett Trailers LLCbased in USA
Both models are available in Fat Cattle, Feed Cattle, and Ground Load configurations. Ranging from 50-53’ long, our trailers are a standard width of 102”, use Hendrickson suspension and come with polished aluminum wheels. Our Fat cattle trailers all come with the waterproof boot box and our Ground Loaders are available with closed tandem, spread axel tandem, and triple axle ...
-
Manufactured by GoBob Pipe & Steel Salesbased in USA
GoBob Pipe & Steel Sales introduces Fortress Fence -- continuous fence panels that are bigger, stronger and less expensive than other continuous fencing on the market today. GoBob now sells Fortress in 6 different sizes. We have a fence for you from cosmetic fence to buffalo ...
-
Manufactured by W-W Manufacturingbased in USA
Feature after feature you’ll find no better portable system on the market today. Designed and built with quality WW features and benefits that will serve your operation for generations to come. 6′ tall panels fabricated from 2″ 14 ga. high tensile steel tubing. All gates are spring-loaded or come equipped with spring-loaded plungers and strike plates. High speed highway hubs. ...
-
Manufactured by Flying W Livestockbased in USA
1/2 Circle Manual Adjustable Straight 2 3/8 Pipe Alleys. Flying W Half Circle Alleys and Crowding Pens are designed with the cattleman in mind. The curved unit works cattle faster and with less effort and less stress on cattle than ever before. The standard unit is set in a 25 foot by 35 foot area and is designed for a 4 inch concrete floor. The system is constructed of 10 gauge steel and 1 ...
-
Manufactured by GoBob Pipe & Steel Salesbased in USA
Now here is a time saving, money making way to sort cattle. Say you are sending cattle up a loading chute or into a squeeze chute and a cow come through that you need to kick out or divert for another purpose. Handle the job easily and safely with Cattle Flow™ cattle working diverter ...
-
Manufactured by GoBob Pipe & Steel Salesbased in USA
Up until now, a ranchers only choice for crowding tubs were either lightweight bolt together units or very expensive permanent tubs that were custom built on ...
-
Manufactured by W-W Manufacturingbased in USA
The Stampede Heavy Duty Palpation Cage allows full access to the rear of your animal for preg checking, castration and any other job where complete access is needed. Gates on either side allow for complete access within your handling ...
-
Manufactured by Flying W Livestockbased in USA
Hydraulic Adjustable {Straight 2 3/8 Pipe Alleys}. Flying W Half Circle Alleys and Crowding Pens are designed with the cattleman in mind. The curved unit works cattle faster and with less effort and less stress on cattle than ever ...
-
Manufactured by Flying W Livestockbased in USA
1/2 Circle Wedge {3" Channel Iron}. Flying W Half Circle Alleys and Crowding Pens are designed with the cattleman in mind. The curved unit works cattle faster and with less effort and less stress on cattle than ever before. The standard unit is set in a 25 foot by 35 foot area and is designed for a 4 inch concrete floor. The system is constructed of 10 gauge steel and 1 ½ inch square ...
-
Manufactured by GoBob Pipe & Steel Salesbased in USA
The Cattle Flow adjustable cattle alley is constructed from all new schedule 40 pipe so it is heavy and built to last. This is the most versatile alley on the ...
-
Manufactured by GoBob Pipe & Steel Salesbased in USA
Have you ever wished you has a super duty loading chute that was safe and built to last but you COULD move it if you needed to? Well, the Cattle Flow cattle loading chute is your answer. This cattle loading chute with ALL NEW heavy steel construction, has been built with all the convenience and safety features in mind. From the catwalk to the access gate, sheeted sides, floor plate floor and ...
-
Manufactured by W-W Manufacturingbased in USA
The WW Stampede Steel “S” curve alley is user friendly and incorporating workability in the adjustments. All “S” alleys are adjusted at the front of the working system in a parallel fashion. Both sides move in with equal pressure, allows the system to operate smoothly for many years to come. Check out our hydraulic options. All solid sided alleys are equipped with a ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you