Agricultural Industry Equipment In Australasia
-
PremiumManufactured by IMKO Micromodultechnik GmbHbased in GERMANY
Special about TRIME is that it completely penetrates the volume of material of 2dm3. It not only calculates data of the moisture close to the surface like the infrared measuring principle but also the water content of the not ground corn. Complex and error-prone bypass constructions are slipped with TRIME systems. In Addition TRIME technology disposes over a flexible design of the probe and ...
-
PremiumManufactured by Myron L Companybased in USA
The nutrient solution and its management are the foundation of a successful hydroponics system. The function of a hydroponics nutrient solution is to supply the plant roots with water, oxygen and essential mineral elements in soluble form. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
MeMo sample pot, inclusive closing ring, contents ca. 0.8 l, colour green, makes up together with MeMo-cap and closing ring a fraud-proof packaging, pallet with 1584 pieces (12 boxes of 132 pieces), with unique bar- and numerical ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
HRS Heat Exchangers offers cleaning in place (CIP) and sterilisation in place (SIP) systems for cleaning and disinfection of food industry systems. Our CIP and SIP systems are supplied with a control system included, enabling automated cleaning ...
-
PremiumManufactured by AMS, Inc.based in USA
The 2-3/4" X 3' One-Piece Combination Edelman Auger is capable of augering down to 3'. The attached 16" Rubber-Gripped Cross Handle is welded to the steel shaft which is also welded to an Eijkelkamp Combination Edelman Auger Head. It is versatile, lightweight, and easy to use. It requires no assembly in the field and works well in a variety of soil conditions. The One-Piece Combination Edelman ...
-
PremiumManufactured by Atlantis International Corporation Pty Ltd.based in AUSTRALIA
Atlantis Turf Cell® can be used in any landscape where low to medium use parking surfaces, access roads and driveways are required. Turf reinforcement provides a reinforced grid for evenly distributed plant growth. With Atlantis Turf Cell® the sub-base required for cells is equal to or less than the sub-base required for concrete or bitumen. The elimination of the traditional storm water ...
-
PremiumManufactured by AMS, Inc.based in USA
Plastic, stainless steel, brass, or aluminum! Order liners by diameter, length, and material type. The sizes shown are the retaining cylinder size (i.e. liners are sized by the OD of the liner). The 3/4" and 1" liners are 1 3/4" longer than the described length to accommodate the reach-and-grab soil probe system. Call for special size ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
MeMo-cap, makes up together with MeMo sample pot and closing ring a fraud-proof packaging, once-only use, pallet with 2376 pieces (18 boxes with 132 pieces), with unique bar- and numerical ...
-
PremiumManufactured by AMS, Inc.based in USA
The only AMS soil probe that features the Hex QP connection. Hex Quick Pin (Hex QP) is a hardened steel male/female hex connection that accepts standard 3/8" snapper pins or heat-treated 3/8" U-clips. It is stronger and faster than standard threaded ...
-
PremiumManufactured by AMS, Inc.based in USA
Hay Probe Top ...
-
PremiumManufactured by Kingspan Klargesterbased in IRELAND
Our below-ground Cesspools and Silage Tanks provide a reliable solution for the collection and retention of sewage, surface water, veterinary/animal waste, firefighting reservoirs and rainwater harvesting ...
-
PremiumManufactured by AMS, Inc.based in USA
Regular Soil Probes are used without liners and have sample window in the body for easy sample recovery. They come with a 10" corrosion-resistant Cross Handle, and some include the Regular Slide Hammer. They are also compatible with the Hammer Head Cross Handle. They resist bending and twisting, and they are made of chromoly, nickel-plated chromoly, powder coated chromoly, or stainless ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS Regular Soil Probes feature a window slot in the cylinder of the probe for easy sample recovery. These probes are used without a liner and are available in two diameters and three lengths. Unplated, or rust-resistant nickel-plated or stainless steel models are available. All AMS probes are made of a sturdy design that prevents the probe from bending or twisting out of shape. Regular soil ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil moisture sensor Thetaprobe ML3. Measuring range 0-50% vol. Accuracy +/- 1%. With 4 pins, length 60 mm, Ø 3.2 mm. Output signal 0-1 Vdc. Inclusive temperature meter range -20...+60 °C, accuracy +/- 0.5 °C over 0...40 °C. Exclusive cable. Warranty 5 ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
The HRS I Series offers options to de-pack and crush (IC Series) and melt (IM Series) frozen juice (a process also sometimes known as re-melting) ready for storage and further ...
-
PremiumManufactured by IMKO Micromodultechnik GmbHbased in GERMANY
You just want to quickly know how moist the delivered sand or gravel is? Or you want to check if the moisture of your material is right for the next process steps? Control your quality on-site. With the handy two-rod probe SONO-M1 and HD2 Mobile you measure moisture precisely in sand, gravel, grit and other aggregates. HD2 is the reading device for the soil moisture sensors TRIME-PICO 64, ...
-
PremiumManufactured by AMS, Inc.based in USA
The Brown Moisture Probe allows you to determine moisture depth quickly and easily. Agronomists and farmers use it to determine the depth of moisture following irrigation. This 43" Probe has an auger tip and depth markings at 1', 2', and 3' from the tip. The Probe is pushed into the soil using the attached 10" Rubber-Gripped Handle. It will easily penetrate saturated soils, but not dry soils. At ...
-
PremiumManufactured by Cornell Pump LLCbased in USA
The 4NHTB pump is designed with Cornell’s renowned quality and durability. It features a 4” discharge, 5” suction, and enclosed impeller. Available in All Iron or CD4MCu materials. Cornell’s patented Cycloseal® design is standard, with a Type 2 single mechanical seal with Buna-N elastomers, stainless steel hardware and tungsten carbide vs. silicon carbide seal faces ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
The HRS Thermblock M Series is a packaged multitube pasteuriser and steriliser for food with low or medium viscosity before aseptic filling or any other filling or packaging ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
Deaeration is principally intended to remove any air present in the material to be processed. The presence of air in many food products encourages oxidation and may be detrimental to product life or quality, in many cases it can increase thermal resistance and heating load. HRS has developed an air removal (deaeration) module which can be fitted into the production line before thermal treatment ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you