Only show results available in Connecticut? Ok

Feed Crimping equipment for Livestock

  • Murska - Model 1400 - Crimping Roller Mills

    The Murska 1400 S 2x2 is equipped with a unique roller cassette, driven by four gears, achieving a crimping capacity of up to 20 t/h. The tractor power requirement is 140 hp. The mill has an air-spring transport chassis, enabling quick changes between work locations. Standard equipment includes hydraulic elevator tilt, working lights and a tool box. The Murska 1400 S 2x2 is an ideal machine for ...

    By Aimo Kortteen Konepaja Oy based in Ylivieska, FINLAND. from Murska Mills Product line

  • Murska - Model 350 - Grain Crimping Mills

    The mill has three-point linkage and it is generally powered by a tractor. Power requirement is 30-40 hp, and 15 kW with an electric motor. Wet grain crimping capacity is 5 t/h, while with dry grain it is 3-10 t/h, depending on the roller ...

    By Aimo Kortteen Konepaja Oy based in Ylivieska, FINLAND. from Murska Mills Product line

  • Maize Kernel Silo

    Sealed storage of maize kernels in an Assentoft silo allows for storing and handling large quantities of moist maize kernels both rationally and economically. Your contribution margin will increase considerably, as you avoid recurring costs of drying, acid treatment and crimping. The sealed stored, wet maize kernels develop a pH-value of approx. 3.5 and are consequently aggressive towards ...

    By Assentoft Silo A/S based in Randers SØ, DENMARK. from Agriculture Product line

  • Himel - Grain Squeezing Machine

    When feeding crushing grain, the amount of feed is reduced by up to 25%, with the same result feeding versus non-squeezed grain. Thus, there are significantly lower feed costs and it must be purchased no expensive food With E. motors from 3.0 to 15 kW process HIMEL Grain crushers up to 3600 kg per hour rolled goods. Hardened cast iron rolls work hard rolled goods to high line feed. Crimping ...

    By Himel Maschinen GmbH & Co. KG based in Melchingen, GERMANY. from Milling & Mixing Systems Product line

  • KC - Model Bruiser 1250 and 600 - Grain Bruiser

    The KC Bruiser 1250 and 600 are dedicated to the high-output production of traditional, flat-rolled grain for home-grown cereal blends and crimping. The 600mm diameter flat rollers will process any grain and can be very easily adjusted to produce the exact quality of roll required for any ...

    By Kelvin Cave Ltd based in Langport, UNITED KINGDOM.

  • Alkagrain - Animal Feed

    Alkagrain is a good quality alkaline animal feed with increased protein and high energy levels produced on farm or manufactured by mixing mature grain with Home n’ Dry. It is safe to feed as a concentrate in balanced diets at 2 – 3 times greater than the feed rate of conventionally prepared cereal grains as a high quality, cost effective substitute for over manufactured and purchased ...

    By FiveF Alka Ltd based in Clitheroe, UNITED KINGDOM. from Farm Feeds Product line

  • Murska - Model 1000 - Crimping Mills

    A larger model in the HD range, the 1000 HD looks the same as the 700 HD and has the same technical specifications, but it is equipped with longer rollers and a larger elevator tube. Crimping capacity for wet grain is approximately 15 t/h. The efficient operation of the Murska 1000 HD requires an 80-90 hp tractor. The mill is capable of milling almost 30 t/h of dry grain with 2 mm grooved ...

    By Aimo Kortteen Konepaja Oy based in Ylivieska, FINLAND. from Murska Mills Product line

  • Murska - Model 700 S2 - Crimping Mills

    The smallest HD model is the Murska 700 HD, which is excellent on medium-sized and slightly larger farms. The mill incorporates gear- driven specially hardened rollers, which will crimp millions of kilos of feed grain. Wet grain capacity is 10 t/h, while with dry grain it is 8-20 t/h, depending on roller surface. Tractor power requirement is 70-80 ...

    By Aimo Kortteen Konepaja Oy based in Ylivieska, FINLAND. from Murska Mills Product line

  • Murska - Model W-Max 20 - Crimping Mills

    Murska W-Max is a power mill, designed to meet the user’s every need. W-Max will achieve almost 60 tonnes/hour (maize) performance at low energy need. The new grinding crimping technology gives perfect ...

    By Aimo Kortteen Konepaja Oy based in Ylivieska, FINLAND. from Murska Mills Product line

  • Wakely - Model 0350 - Two Roll Grinder

    The Two roll grinder, is specially designed to meet the needs of Pig & other farming industries. Its design allows for quick and Intuitive Operation & ...

    By Wakely Engineering Ltd. based in Co. Louth, IRELAND. from Roller Grinders Product line

  • Model TA300 - Truck Transfer Auger

    The truck transfer auger integrates with all Richiger baggers to move grain from dump trucks, hopper trailers, and gravity discharge carts, directly into bags with no intermediary steps and resultant loss of time. The transfer auger requires a 120 HP tractor with hydraulics, and can convey some 280 tons of grain per hour. It is mounted as a permanent fixture on the bagger because it does not ...

    By Richiger S.A. based in Sunchales, ARGENTINA. from Truck Transfer Auger Product line

  • Model R950M - Single Roller Mill Bagger

    These machines offer the possibility of ensiling moist grain by crimping the grain and storing it in a bag, all done in one single movement. Besides being a uniquely palatable and digestible concentrate that preserves the grain’s original nutrients, fermented grain (e.g., corn, barley, sorghum, wheat, etc) keeps exceptionally well in bags because the anaerobic environment is steadier and ...

    By Richiger S.A. based in Sunchales, ARGENTINA. from Roller Mill Baggers Product line

  • Wakely - Model 1260 - Flaking Mill

    The 1260 Electric flaking has being designed to produce quality quality steamed flakes, Its design allow for quick, Intuitive maintenance & ...

    By Wakely Engineering Ltd. based in Co. Louth, IRELAND. from Flaking Mill Product line

  • Stationary Rollermill

    Today’s feeding operations are now recognizing the advantages of rolled grain. Art’s Way’s Rollermills provide you with efficient milling for top quality feed from your corn or small grains and does it with lower horsepower requirements. Rolling feed minimizes dust while providing more palatable and digestible feed for improved feed conversion. The rolls are constructed from a ...

    By Art`s Way Manufacturing Co., Inc based in Armstrong, IOWA (USA). from Livestock Equipment- Stationary Grinders Product line

  • Model MP 2000, MC 1000 and MC 850 - Agricultural Compactors

    The MP 2000, MC 1000 and MC 850 Compactors are well known as stabile an long running balers for compacting, baling and wrapping maize and a variety of bulk ...

    By Orkel based in Fannrem, NORWAY. from Agricultural Compactors Product line

  • KC - Mini-Flaker

    Knowing the moisture content of grain for crimping, when grain is harvested at up to 45% moisture, has, until now, always been a matter of guesswork and experience. Kelvin Cave Ltd has teamed up with Finnish meter manufacturer Wile to produce the first (as far as we know) grain moisture meter that can give readings above 30% with any degree of ...

    By Kelvin Cave Ltd based in Langport, UNITED KINGDOM.

  • Wakely - Model 1240 - Crimper & Dry Roller Mill

    The 1240 Mobile Crimper & Dry roller is an evolution on previous machines, The Machine is built to suit contractor needs, Output, its Calculation & reliability. Its design allows for quick and Intuitive Operation & ...

    By Wakely Engineering Ltd. based in Co. Louth, IRELAND. from Mobile Dry Roll Crimper Product line

  • Murska - Model 220 SM / Super - Crimping Mills

    The roller mill is used to crimp dry grain, to produce groat, which is more suitable for livestock ...

    By Aimo Kortteen Konepaja Oy based in Ylivieska, FINLAND. from Murska Mills Product line

  • Model M1200 - Grinders/ Crimpers

    The most powerful machines within the type range are designed for industrial feed mills. Usually, these are operated in large-scale technological lines. They are suitable for continuous ...

    By ROmiLL, spol. s r.o. based in Brno, CZECH REPUBLIC. from Feed Processing Machines Product line

  • Dens - Model X - Agriculture Compactors

    Dens-X, the new and innovative generation of Orkel Compactors, for better baling. The Dens-X is the new generation of Orkel agricultural Compactors, with outstandig capacity, durability and user friendliness. It is able to bale a wide variety of bulk or chopped material like forage maize, grasses, forage mixes/TMR, crimped grain and manure. ...

    By Orkel based in Fannrem, NORWAY. from Agricultural Compactors Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you