Feed Mixer Downloads

  • Premium

    Flyer Feed and Feed Ingredients Brochure

    calibrationpackages Feed & Feed IngredientsN500-001Basic Package NIRFlex SolidsComprising:NIRFlex N-500 Polarization InterferometerNIRFlex Solids measurement cellPetri Dish Add-on for NIRFlex Solids incl. set of petri dishesNIRWare 1 software CD incl. License BasicIQ/OQ Manual NIRFlex N-50092220 en 0801 / Technical Data subject to alterations / Quality System ISO 9001BUCHI India Private Ltd.201, ...


    By BÜCHI Labortechnik AG

  • Premium

    Application - Determination of amino acids in fodders and raw materials using high performance capillary electrophoresys method using Capel-105

    Introduction The method enables fast quantitative determination in feeds, mixed fodders, and raw materials of the following amino acids: arginine, lysine, tyro sine, phenylalanine, histidine, leucine and iso -leucine (total), methionine, valine, proline, alanine, glycine, cystine, tryptophan, aspartic and glutamic ...


    By Lumex Instruments Group

  • Premium

    Determination of Methionine, Threonine, Lysine and Cystine in Fodders and Raw Materials Using High Performance Capillary Electrophoresys Method Using Capel-105 - Applications Note

    The method enables fast quantitative determination of amino acids methionine, threonine, lysine, and cystine in feeds, mixed fodders, and raw ...


    By Lumex Instruments Group

  • Premium

    Application - Determination of tryptophane in fodders and raw materials using high performance capillary electrophoresys method using Capel-105

    Introduction The method enables fast quantitative determination of amino acid tryptophane in feeds, mixed fodders, and raw ...


    By Lumex Instruments Group

  • Model 540-14 - Commercial Feed Mixers Brochure

    The patented rotor lifts feed up to the side augers that move the feed from end-to-end for thorough mixing. The lifting action of the rotor eliminates wedging of the hay or long cut feeds under the lower auger. Patented tumbling design reduces mixing power requirements. See more about rotor options ...


    By Roto-Mix

  • Model 540-14XD, 620-16XD - Commercial Xtra Duty Feed Mixer Brochure

    Roto-Mix is raising the feed mixer standards with their new Xtra Duty 540‑14 and 620‑16 Commercial Feed Mixers. Loaded with new design features and benefits, the Xtra Duty mixers are stronger, longer lasting and even more maintenance ...


    By Roto-Mix

  • Xpress - Model 325, 425, 505 - Vertical Mixers Brochure

    Lower horsepower with chain and sprocket drive. Adjustable axle for loading convenience. Great mixer for all feeding applications, dairy, cow/calf, stockers and more. Can be equipped with more knives ...


    By Roto-Mix

  • Model 625, 745, 865, 1105, 1355 & 1505 - Vertical Mixers Brochure

    Model 625, 745, 865, 1105, 1355, 1505 truck, trailer or stationary with single flighted twin augers. Feed rises 42" per revolution to mix twice as fast! 42" every 3.3 seconds at 18 revolutions per ...


    By Roto-Mix

  • Spirmix Trampilla - Model 16 - 18m³ - Mixer wagon - Vertical Auger Diet Feeder - Brochure

    The Spirmix diet feeders 16 – 18 m3 are equipped with vertical stepped augers that brew and aerate the mixture, they can feed about 85 to 120 dairy cows per pass. The rolled tank of the mixer feeder gives various advantages, it reduces the power required for making a mixture; the flared and smooth shape makes the ration homogeneous more rapidly. Easy to use, the Spirmix mixer feeders are ...


    By Lucas G

  • Spirmix Trampilla - Model 12 - 14 m³ - Mixer wagon - Vertical Auger Diet Feeder- Brochure

    The Spirmix diet feeders 12 – 14 m3 are equipped with a vertical stepped auger that brews and aerates the mixture, they can feed about 60 to 90 dairy cows per pass. The rolled tank of the mixer feeder gives various advantages, it reduces the power required for making a mixture; the flared and smooth shape makes the ration homogeneous more rapidly. Easy to use, the Spirmix mixer feeders are ...


    By Lucas G

  • Milling & Mixing Products Brochure

    Superior by Detail - Hammer Feed Mills without blower type BHOS. Hammer mills without blower type BHOS, when compared with a blower mill, deliver a significantly better milling performance than a blower hammer mill at the same power rating. The reason is that a BHOS mill dedicates the whole motor power to milling, without having to divert part of the power for the conveyance of grain/bruised ...


    By Buschhoff GmbH & Co.

  • Model 143 - Incline Conveyor Brochure

    Incline Conveyors are used to transfer raw or mixed material to designated locations. Uses include feeding raw material into batch mixers, continuous soil mixing lines, potting equipment or flat filling equipment. Incline Conveyors are available in standard widths of 14″ and 18″ with custom widths available up to 36″. Incline Conveyors start at 10′ and can be ordered in ...


    By Bouldin Corporation

  • Automated Feeding Mix Feeder with WIC system Brochure

    Increase the efficiency of the feeding process at your dairy farm and experience the benefits of precise group feeding and optimized feed management: MixFeeder with intelligent WIC system. Feeding, TMR feeding, and automatic feeding are the key phrases important to every single dairy farm. Let a part of your work be made easier in the future: The automated GEA MixFeeder with WIC supplies your ...


    By GEA Farm Technologies

  • Gro-2-Max Directions Datasheet

    It is advised that Gro-2-Max be introduced into the diet of chicks and/or grown chickens and other poultry in feed mixture or water mixture, at least every other day (water mixture is most recommended). Feed mixed with Gro-2-Max should not be left unused for more than one day as product efficiency may be reduced. Avoid exposing Gro-2-Max to temperatures below 35°F and above 104°F as ...

  • Model VDL500 and VDL600 - Circular Tube Feeding Systems Brochure

    The  VDL500 en VDL600 circular tube feeding systems are specially designed to meet the high demands and industrial size of modern pig farms. The ø50 en ø60mm systems with cable or chain disc conveyors and heavy duty corners are ideal for the large buildings with different compartments , boxes and crates. The VDL tube feeding systems is very suitable for the distribution of ...


    By VDL Agrotech

  • Straw Bale Breaker Brochure

    The Cormall MTX-H straw bale breaker is a new system based on our traditional diet feed mixer. The system allows you to break up the bale with a minimum of power consumption, lower noise, lower auger speeds and a minimum of wear and tear on the machinery. Consequently it is a highly durable system that can handle stones and other contamination in the straw, without any stops in ...


    By Cormall A/S

  • Haybuster - Model CMF-430 - Vertical Mixer Brochure

    At Haybuster, we put 40 years of hay and feed processing experience into our Cutter-Mixer-Feeders (CMF’s). Our engineers, with farm and cattle backgrounds designed them with input from dairy and beef growers throughout North America. Haybuster products are built with attention to durability, versatility and reliability. Compare our equipment to our competition and you will see the ...


    By Tri City Truck & Equipment

  • Triomix - Model P - Mixer Feeder Wagon Brochure

    Cut silage, mix and discharge feed, and even spread straw with a single machine. This is something  you can now do, thanks to the multifunction Triomix P. This Triomix is equipped with a mechanically powered straw blower, capable of blowing straw into the barn up to a distance of 25 metres. Hay, straw, round and square bales are no problem for the Triomix. The discharge conveyor is located ...


    By Trioliet-Mullos B.V.

  • Vertical mixer

    VERTICALMIXERSVertical mixers have an internal vertical screw conveying the material from bottom to the top, promoting to the mix. This design is also suitable for storage of poor flow materials, to prevent hang-up and bridging problems.The mixers are provided with large doors for easy cleaning.They can be supplied with several options:- load by horizontal screw automatically feed- pneumatic ...

  • SOLTEC - Model ZN-12 - Mortar Pump Datasheet

    Mortar pump ZN-12 has a hopper for getting materials from mixer-agitator. The presence of the feed bin allows to convey mortar continuously while using the cyclic mixture equipment, that is very important while working where breaks are undesirable or even forbidden. Mortar pump ZN-12 is equipped by vibrosieve for identifying extra materials and large particles in the ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you