Feed Mixer Equipment For Livestock Available In Tennessee
-
PremiumManufactured by Zeltex LLCbased in USA
EvoNIR 4.0 Analyzer with ISOBUS protocol can be connected to any virtual terminal with built-in ISOBUS task controller and can be installed on forage harvesters, combines, balers, forage wagons, slurry tankers, compactors, feed mixers and portable in a carrying ...
-
Manufactured by Schauer Agrotronic GmbHbased in AUSTRIA
Goat and sheep farmers save a lot of time with this unique and inexpensive mechanization for goat feeding. The Feedo feeding belt can be adjusted to a width of between 60 and 160 centimetres. Different drive winch options enable belt lengths of up to 100 meters. An indoor crane, wheel loader or stationary mixing wagon can supply the machine with feed. The narrow feeding table makes it possible to ...
-
Manufactured by Erdallar Agricultural Machinerybased in TURKEY
It has the capacity to take care of 85 - 100 cattle or 850 - 900 small cattle. It forms a homogeneous mixture with 12 - 14 bales. It has a belt system, bucket, self-lubricating and pumped. It has horizontal double auger. Optional weighing system is ...
-
Manufactured by Zinpro Corporationbased in USA
Zinpro Performance Minerals are known for being the most dependable, consistent and cost-effective trace mineral products available. And now, Zinpro Corporation introduces Zinpro 4-Plex C, the highest-concentrated Zinpro 4-Plex product available with a ...
-
Manufactured by Microtronics, LLCbased in USA
Enclosure: Die Cast Aluminum. Color: Yellow or Gray. Decal: Customizable. Switch: Environmentally Sealed Toggles and Single. Axis Paddle Control. Dimensions: 6 7/8” L x 3” W x 2 1/4” D. Antenna: External 6” Antenna. Weight: 3 1/2 lbs. Address Code: 1 Billion+ with RF Bands. Operating Temp: -20c to +50c. Range: 300 ft. Frequency: 49 MHz, 5 RF Bands (FM). Power Source: 9 ...
-
Manufactured by Roto-Mixbased in USA
Designed with commercial cattle feeders in mind, this rugged unit uses two 30" diameter low speed augers in the bottom, bringing the feed forward without a boiling action to two cross augers. The cross augers then move the feed to the discharge conveyor for fast, efficient and even feed delivery. With ROTO-MIX, there are no high wear, high maintenance and high cost floor ...
-
Manufactured by Penta TMR Inc.based in CANADA
ASAE capacity, 368 bu heaped, 236 cu ft struck level. Hydra-Spread exclusive stepped-beater design. Two, high speed, horizontal beaters with Ripgrip paddle design. Lower Beater 24" dia, 385 RPM. Upper Beater 16" dia, 360 RPM. Endgate / Wood Rails / High-density poly floor & sides. Galvanized beater pan. 540 RPM or 1000 RPM with shearbolt ...
-
Manufactured by G. M. Biochem Pvt. Ltd.based in INDIA
Composition (Each 10GM Contain). Protein: 100 mg. Calcium: 20 mg. Vitamin D3: 20 mcg. Cholesterol: 25 mg. Carotenoid: 50 ...
-
Manufactured by Moyno, Inc.based in USA
Suited for handling semi-dry, high solids content fluids that have a tendency to 'bridge' in the inlet hopper. High-performance Moyno 2000 Pumps offer low maintenance, minimal downtime and long service life for low total cost of ...
-
Manufactured by Easyfixbased in IRELAND
Ensuring that feed always remains in front of cattle! The EasyFeeder is an interlocking plastic trough system for feed lanes. The moulded, non-toxic and shatterproof plastic has a smooth, raised and sloped plastic surface. It is suitable for use with all diet feeders and mixer wagons. ...
-
Manufactured by VDW Constructionbased in BELGIUM
Standard: Vertical mixer with two mixing augers, hydraulic drive, minimum flow rate 50 l/min. For mixing of corn, (long) grass, straw and concentrates. Two-sided discharge with sliding doors as standard. Four double-acting valves required (mixer, two loading doors, tilting). ...
-
Manufactured by A-Lima-Bis Sp. z o.o.based in POLAND
A proposal for large livestock farms. The range of the offer includes machines with a capacity of 18 m³ to 30 m³. The key issue in this series of diet mixers is the selection of the appropriate suspension – this determines the overall height of the machine. The solution for two-axle machines are boogie or tandem ...
-
Manufactured by Vortex Hydra S.r.l.based in ITALY
VORTEX MODULO is a roof tile manufacturing plant that is designed on a ‘modular’ system that enables a customer to easily upgrade the capacity of his plant to suit growing market ...
-
Manufactured by Roto-Mixbased in USA
Model 425 Vertical Express Twin Auger is a vertical feed mixer with a mixing capacity of 420 cu. ft. and can hold a maximum load with a heavy ration up to 11,750 lbs. This model is available in trailer and stationary units but not in truck mount. VXT Vertical Mixers have a low profile, perform fast processing of hay with quick mixing and discharge. It is equipped with tower assembly shaft twin ...
-
Manufactured by Cosmo S.r.l.based in ITALY
Mixer 80 can be used for preparing concrete, mixing animal feeds. STANDARD EQUIPMENT: cone painted with primer and two components polyuretane finish/ PTO shaft/ hydraulic movement, the cement mixer is equipped with all standard ...
-
Manufactured by Buschhoff GmbH & Co.based in GERMANY
The Buschhoff feed mixers are available in different designs and layouts. Their capacity is between 750 and 3.000 kg. They use the well-proven forced mixing mode, resulting in a mixing accuracy of 1:100.000. The large, slow-moving mixing auger makes for an efficient and fast mixing. Up to 5 % oil can be added without any problem. Another advantage: The mixers of the WR layout can be fitted with ...
-
Manufactured by FOSSbased in DENMARK
Use the NIRS™ DA1650 feed analyser for routine quality control of raw materials and final products to improve efficiency and ...
-
Manufactured by Jaylor Internationalbased in CANADA
A mini mixer that can process 4×5 bales. On smaller operations, or when feeding specialty groups, such as weaned calves or dry cows, the Mini Mixer Series fits perfectly. With a Horsepower requirement of only 45HP, the 5275 has the lowest horsepower requirement of any vertical TMR Mixer in its class. We attribute this low horsepower requirement to the unique design of the slide plate on our ...
-
Manufactured by Rata Equipmentbased in NEW ZEALAND
The Rata Auger Bucket is an ideal attachment for your Tractor front end loader and/or Telehandler, it's specifically designed to handle and mix maize, silage and palm kernel etc. The twin mixing star agitators keep the material from bridging. The auger is hydraulically driven with a powerful motor, the auger chute extends 300mm to the side of the bucket in operation by a hydraulic In all, this is ...
-
Manufactured by Supreme International Ltdbased in CANADA
The 400 Pull-Type has a maximum payload of 10,000 lbs (4,536kg), struck capacity of 321 ft³ (9.1 m³) or 378 ft³ (10.7 m³) with tub extension, and requires 60 horse power (45 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you