Feeder Wagons Equipment For Livestock Near Australia
-
Manufactured by Agronic Oybased in FINLAND
A compact feeder wagon with low power consumption. Suitable for round bales and block silage. The Agronic 143S self-loads the bale or block silage and feeds to both sides. Slices of any size can be cut, and the chop length is always perfect. The wagon is light and easy to maneuver. All functions are hydraulically operated and controlled via two joysticks apart from the conveyor and double pump ...
-
Manufactured by Trioliet BVbased in NETHERLANDS
The Solomix 1 VLH-B is a compact mixer feeder, featuring a single vertical auger and a side belt that discharges to the front. This trailed mixer feeder is suitable for both large and small-scale livestock breeders and is available in volumes from 7 - 14 m³. The Solomix 1 can furthermore be made to measure where ...
-
Manufactured by Trioliet BVbased in NETHERLANDS
Cut silage, mix and discharge feed, and even spread straw with a single machine. This is something you can now do, thanks to the multifunction Triomix P. This Triomix is equipped with a mechanically powered straw blower, capable of blowing straw into the barn up to a distance of 25 metres. Hay, straw, round and square bales are no problem for the Triomix. The discharge conveyor is located at the ...
-
Manufactured by Trioliet BVbased in NETHERLANDS
The Solomix 1 VLH-K is a compact mixer feeder, featuring a single vertical auger and a chain conveyor that discharges to the front. This trailed mixer feeder is suitable for both large and small-scale livestock breeders and is available in volumes from 8 - 14 m³. The Solomix 1 can furthermore be made to measure where ...
-
Manufactured by SAME DEUTZ-FAHR - SDF Groupbased in USA
A complete range with high load capacities from DEUTZ-FAHR. The range covers load volumes of 22 to 78m³ and meets the highest requirements in terms of power, cutting quality and performance. Being particularly good value for money it is a commercially attractive solution for all grassland ...
-
Manufactured by Giltrap Ag Equipment Pty Ltd.based in AUSTRALIA
Tandem axle with 3 positions for variable draw-bar loading. Manual feed rate control. Ladder, mudguards/walkways and LED tail lights fitted. Double chassis ready for scales. High tensile floor shaft. Priority belt speed control. Stainless steel sides for corrosion and wear resistance. Mesh front screen and back gate for good visibility. Self-releasing back gate - opens automatically when bulk ...
-
Manufactured by Giltrap Ag Equipment Pty Ltd.based in AUSTRALIA
Manual feed rate control. Tandem axle with 3 positions for variable draw-bar loading. Replaceable pivot bushes on axle. Ladder, mudguards/walkways and LED tail lights fitted. Double chassis ready for scales. High tensile floor shaft. Priority belt speed control. Stainless steel sides for corrosion and wear resistance. Mesh front screen and back gate for good visibility. Self-releasing back gate ...
-
Manufactured by Giltrap Ag Equipment Pty Ltd.based in AUSTRALIA
Tandem axle with 3 positions for variable drawbar loading. Manual feed rate control. Ladder, mudguards/walkways and LED tail lights fitted. Double chassis ready for scales. High tensile floor shaft. Priority belt speed control. Stainless steel sides for corrosion and wear resistance. Mesh front screen and back gate for good visibility. Self-releasing back gate - opens automatically when bulk ...
-
Manufactured by Giltrap Ag Equipment Pty Ltd.based in AUSTRALIA
Manual feed rate control. Tandem axle with 3 positions for variable draw-bar loading. Ladder, mudguards/walkways and LED tail lights fitted. Double chassis ready for scales. High tensile floor shaft. Priority belt speed control. Stainless steel sides for corrosion and wear resistance. Mesh front screen and back gate for good visibility. Self-releasing back gate - opens automatically when bulk ...
-
Manufactured by Giltrap Ag Equipment Pty Ltd.based in AUSTRALIA
Manual feed rate control. Tandem axle with 3 positions for variable draw-bar loading. Ladder, mudguards/walkways and LED tail lights fitted. Double chassis ready for scales. High tensile floor shaft. Priority belt speed control. Stainless steel sides for corrosion and wear resistance. Mesh front screen and back gate for good visibility. Self-releasing back gate - opens automatically when bulk ...
-
Manufactured by Farmgard Ltdbased in NEW ZEALAND
The ten, twin vertical auger mixer wagons, from 15m3 to 33m3, are ideal for operators who want more capacity without extra height, while maintaining quality. Despite the extra capacity, wagons in this range remain easy to ...
-
Manufactured by Coombridge & Alexander Ltd.based in NEW ZEALAND
Shot Blasted, Primed and Two-Pot Paint Finish Coated. Double-thickness Elevator Bars. Pressed Stainless-Steel Bin Sides. High-Strength Birch-Ply Timber Floor. Hydraulic Sensor Valve (controlling the floor and elevator speeds). 10-13mm Floor-Chain (model dependent). Improved Floor-Chain and Conveyor set-up for Palm Kernel and similar products. Extensive use of Stainless-Steel and ‘Hot ...
-
Manufactured by Daytech Engineeringbased in NEW ZEALAND
Daytech self-loading tow behind round bale-feeders is used extensively throughout New Zealand. This feed out wagon offers you a machine that does not waste your expensive winter feed and operating on 4 flotation tires creates very little mud as opposed to the mess and wastage of ring and trough feeders. Independently oscillating tandem wheels and wide track make the bale feeder very stable and ...
-
Manufactured by Mcintosh Bros Engineers Ltdbased in NEW ZEALAND
Designed to provide a more consistent and even mix, the McIntosh Beater wagon is an addition to the conventional chain elevator system. The unique design with three PTO-driven horizontal beaters allows for better incorporation and more consistent blending of different products. Bales are broken up so that cows do not have to lift their heads to drag the feed apart, resulting in less wastage. ...
-
Manufactured by Mcintosh Bros Engineers Ltdbased in NEW ZEALAND
You expect your farm machinery to go the distance, and McIntosh delivers with Forage Wagons built to the highest quality standards. We’ve thought about the rugged and unpredictable conditions on so many New Zealand farms and engineered a range of Forage Wagons that won’t let you down when the going gets tough. McIntosh offered one of the first Forage Wagons on the New Zealand ...
-
based in SINGAPORE
EvoNIR 4.0 More technology and connectivity. Contractors, Growers and farmers can now rely on a new generation of EvoNIR analyzer for smooth, precise and reliable operations in the field. The Dinamka Generale EvoNIR 4.0 sensing technology analyzes forage, silage, slurry and grains to provide reliable analysis for important nutrient constituents to help producers manage their daily activity In the ...
-
Manufactured by Seko Industries Srlbased in ITALY
VMS/ME Series, available in 3 models with capacity 33, 41, 45 ...
-
Manufactured by Seko Industries Srlbased in ITALY
Available in 13 models with capacity from 5 to 30 m³. Series 400: 5 m³. Series 450: 7 - 9 - 11 m³. Series 500: 11 - 13 - 15 - 17 m³. Series 600: 17 - 20 - 23 m³. Series 650: 25 m³. Series 700: 30 ...
-
Manufactured by Seko Industries Srlbased in ITALY
VMF/SELF Series, available in 3 models with capacity 11, 13, 15 ...
-
Manufactured by Seko Industries Srlbased in ITALY
Available in 6 models with capacity from 11 to 27 m³. Series 450: 11 m³. Series 500: 11 - 13 - 15 m³. Series 600: 21 m³. Series 650: 27 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you