Slurry Pump (Liquid Manure) Equipment
-
Manufactured by LJM Lind Jensens Maskinfabrikbased in DENMARK
LJM´s pump programme complies to all demands and we have pumps ranging from size 1.5 to 18.5 kW. LJM pumps are used in storage tanks, reception pits, collecting tanks or similar where difficult media have to be ...
-
Manufactured by Slurryquipbased in UNITED KINGDOM
This is a standard Bauer pump mounted on the front with a 6m whisk on the rear. With 600m of 6" and 400m of 4" this unit can maintain a very acceptable output of 170 m3/hr with an engine RPM of 1450, that's ...
-
Manufactured by LJM Lind Jensens Maskinfabrikbased in DENMARK
DPAS S090 is a small pump and is very suitable for liquid manure and for installations in reception pits and small mixer tanks. ...
-
Manufactured by Redrock Machinery Ltdbased in NORTHERN IRELAND
The Redrock slurry pump has gained a reputation for being strong, Reliable and virtually maintenance free across the range. To improve mixing performance the off- set nozzle allows the slurry to be mixed in almost all directions. For varying tank depths, the pump can be adjusted by up to 300mm. The three point linkage ...
-
Manufactured by Redrock Machinery Ltdbased in NORTHERN IRELAND
Over and above the specification of the original Redrock slurry pump, the super flow mixes faster, agitates further and increases productivity. This has been achieved by pairing a larger capacity gearbox with a unique streamline pipe system, designed to reduce power loss at all stages, therefore increasing overall performance. With a top ...
-
Manufactured by Patz Corporationbased in USA
Consistently transfers slurry manure long distances – up to 600 ft (183 m)!. Energy efficient – hydraulically or mechanically driven. Manure handling with in-the-barn comfort. Long-lasting, proprietary, oxygen- and ozone-resisting seals (Tundra™ Pro Pump only). Works in conjunction with scrapers, gutter cleaners, skid ...
-
Manufactured by Agronic Oybased in FINLAND
Agronic LP 125 is a tractor-operated two-phase flow slurry pump. A hydraulic pump at the end of a hose efficiently pumps slurry to a six-winged PTO pump which again pumps the slurry forward. Pumping is possible in places which are inaccessible ...
-
Manufactured by Lothar Becker Agrartechnik GmbHbased in GERMANY
These submersible pumps are particularly suitable for the transport of cattle slurry with food and bedding remains as well as for pig slurry, sewage sludge and biogas substrate. Feeding of biogas fermenters, filling of manure silos, manure tankers, manue pump and flushing systems. Double face seal: Industrial design, snore mode ...
-
Manufactured by LJM Lind Jensens Maskinfabrikbased in DENMARK
DPAE S100 is also available in 3x230V on request. DPAE S100 is a small pump and is very suitable for liquid manure and for installations in reception pits and small mixer ...
-
Manufactured by EURO-P Kleindienst GmbHbased in GERMANY
ER2-type centrifugal slurry / manure pump with air-cooled electric motor for stationary use as a chopper pump with mixing facility in pits and other storages. The pump is equipped with a special valve plate to switch between the two possible operations of pumping or mixing. The agitation nozzle is pivotable ...
-
Manufactured by EURO-P Kleindienst GmbHbased in GERMANY
ER2-type centrifugal slurry / manure pump to be powered with PTO-shaft fpr stationary use as a chopper mixing pump in pits an other storages (use only PTO shafts with a shear pin as safety mechanism). The gearbox is designed for an input speed of 540 ...
-
Manufactured by EURO-P Kleindienst GmbHbased in GERMANY
ER4-type centrifugal slurry / manure pump to be powered with PTO-shaft for stationary use as a chopper mixing pump in pits an other storages (use only PTO shafts with a shear pin as safety mechanism). The gearbox is designed for an input speed of 540 rpm. The pump is equipped with a three-way valve to switch between the two ...
-
Manufactured by EURO-P Kleindienst GmbHbased in GERMANY
ER3-type centrifugal slurry / manure pump with air-cooled electric motor for stationary use as a chopper pump with mixing facility in pits and other storages.The pump is equipped with a three-way valve to switch between the two possible operations of pumping or mixing. The agitation nozzle is pivotable 270° ...
-
Manufactured by EURO-P Kleindienst GmbHbased in GERMANY
ER2-type centrifugal slurry / manure pump to be powered with PTO-shaft fpr stationary use as a chopper mixing pump in pits an other storages (use only PTO shafts with a shear pin as safety mechanism). The gearbox is designed for an input speed of 540 rpm. The pump is equipped with a special valve plate to switch between the two ...
-
Manufactured by EURO-P Kleindienst GmbHbased in GERMANY
High Pressure ER3-type centrifugal slurry / manure pump with air-cooled electric motor for stationary use as a chopper pump with mixing facility in pits and other storages. The pump is equipped with a three-way valve to switch between the two possible operations of pumping or mixing. The agitation nozzle is ...
-
Manufactured by Slurryquipbased in UNITED KINGDOM
Slurryquip recommends Bauer pumps based on the output, reliability and superior build ...
-
Manufactured by Slurryquipbased in UNITED KINGDOM
Tractor gear pump with adjustable cutter flange. Spiral housing of GG25. Suction flange with ribbed inlet and irrotational function. High consistency impeller with blades - 2600min-1. Thick matter impeller of spheroidal graphite iron with hardened cutting edges. Cutting flange made of chromium steel casting. Compact spur gear box with ...
-
Manufactured by Slurryquipbased in UNITED KINGDOM
Slurryquip have developed a unique remote control system enabling pump and compressor to be operated from the field, providing the operator with a much more controlled ...
-
Manufactured by Agriprom BVbased in NETHERLANDS
Agriproms’ AG2-type centrifugal slurry/manure pump with air-cooled electric motor is ideal for stationary use as a chopper pump with mixing facility in pits and other storages. The pump is equipped with a special valve plate to switch between the two possible operations of pumping or mixing. The agitation ...
-
Distributed by Agrometer a/sbased in DENMARK
The SDS spreader is continuously operating in the fields, whilst the slurry is being pumped directly from the storage tank to the distributor. The average capacity is approx. 100-150 tonnes per hour or the equivalent of 5-6 hectares.Using the SDS 7000 / 7200 is also removing smell issues from the roads. With an DP/APV pump unit the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you